Student
Reaserch Projects
Student
Projects
The following are the project works done in the field of Production System
Björn Bockel
Entwicklung von Bausteinen und Transporteinheiten in SIMFLEX3D mit
Unterstützung von Cinema 4DXL7(Development of building components and
transportation units in SIMFLEX/3D with support of Cinema 4DXL7)
2002
Björn Bockel
Konzepte der Bausteinerstellung für SIMFLEX3D mittels Cinema 4DXL7(Concept
of building blocks for SIMFLEX/3D using Cinema 4DXL7
2002
Mark Junge
3D Fabriksimulation mit OpenGL (3D Factory simulator with OpenGL)
2001
Miroslav Martinovic
Simulation und Realzeitsteuerung produktionstechnischer Anlagen (Simulation
and real time control production plant)
2001
Sven Wagner
Grafische Darstellung von Betriebsdaten (Graphical design of operational data)
2001
Arne Bippes
Entwicklung eines Softwarewerkzeuges zur rechnerunterstützten
innerbetrieblichen Weiterbildung (Development of a Software tool for Computer
aided in-plant training.
2001
Lars Martin;
Nemrude Verzano
Integration von Navigations- und Verhaltensalgorithmen für Fahrerlose
Transportsysteme in einen Fabriksimulator (Integration of navigations and
behavioral algorithm for a driverless transport system into and factory
simulator)
2001
Joachim Buhr
Technik-Transfer aus den Industrieländern und angepaßte Technologie in
Entwicklungsländern (Technology transfer from the industrialised countries and
adapted technology in developing countries)
2001
Bernd Michalke
Inbetriebnahme von Transportsystemen mit drahtloser Steuerung in
Modelltechnik (Implementing of transport system with driverless control in
model technology)
2001
Lars Martin
Parametrierbares Produktionsmodul in der pharmazeutischen Industrie
(Parameterising the Production module in the pharmaceutical industry)
2001
Bernd Michalke
Konstruktion eines Freifahrenden Transportfahrzeugs für die Modelltechnik
des Fabriksimulators SIMFLEX/3D (Construction of free driving transport vehicle
for the model technique of factory simulator)
2000
Andreas Schneck
Entwicklung und Implementierung der Softwarebausteine Kettenförderer und
Querförderer in den Simulator Simflex 3D (Development
and implementation of the software modules chain conveyors and transverse
promoters into the simulator Simflex 3D)
2000
Tobias Tschöpe
Dokumentenmanagement (Documentation Management)
1999
Andreas Schneck
Deskriptive statistische Analyse der AB-Kommissionierzone des Fresenius
Logistikzentrums Friedberg (Descriptive statistical analysis of AB-Commissioner
zone of Fresenius logistic centre Friedberg)
1999
Antje Kaufmann, Melanie Schlemper
ARIADNE Netzstrukturen und Navigationsalgorithmen für Freifahrende
Transportsysteme (FTS) (ARIADNE network structure and navigations algorithm for
free driving transport system FTS)
1998
Andreas Hübler
Standardisierung von Fertigungsunterlagen zu modelltechnischen Bausteinen
im Umfeld des Fabriksimulators SIMFLEX/3(Standardisation
from production documents to model-technical components in the surrounding
field of the factory simulator SIMFLEX/3D)
1998
Klaus Stein
NC-Programmierungssystem für 3-achsgesteuerte Werkzeugmaschinen in
Modelltechnik (NC-Programming system for 3 steering working tool in model
technology)
1998
Ulrich
Cordes
Konstruktion und Dokumentation einer modelltechnischen Steuerung im Umfeld
des Fabriksimulators SIMFLEX/3(Construction and documentation of a model-technical control
in the surrounding field of the factory simulator SIMFLEX/3D)
1997
Jochen Bernhard
Integration einer grafischen Benutzeroberfläche in ein Simulationsprogramm
(Integration of a graphical user interface in a Simulation program)
1997
Thomas Kretzschmar
Förderelemente in der Materialflußsimulation (Conveyor elements in the
material flow simulation)
1997
Sven Hamel
Entwicklung des Logistikkonzeptes für ein mittelständisches
Zulieferunternehmen (Development of logistic concept for the medium sized
supplier industries)
1997
Klaus Stein
Konstruktion des mechanischen Modellbausteins Drehpuffer (Construction of
mechanical model building blocks of rotatory buffer)
1996/97
Peter Tewes
Entwicklung von Materialflußsimulationen als Anwendungen einer
objektorientierten Grundlagenbibliothek (Development of material flow as
application of an object oriented basic library)
1996
Thorsten Gerhold
Simulation der Vormontage
des HL8 Achsgehäuses
1996
Stefan Kleis
Programmierung und konzeptioneller Modellentwurf des Transportbausteins
Drehpuffer (Programming and conceptual modelling of transport blocks of
rotatory buffer)
1996
Angela Seebach; Joachim Nebe
Erstellung einer einheitlichen, grafischen Benutzeroberfläche unter
MS-Windows und X-Windows für den SSY-Simulator (Building of uniform, graphical
user interface under MS-Windows and X-Windows for SSY-Simulator)
1996
Roman Nowak
Logistik im Automobilbetrieb unter Einbeziehung kommunikationstechnischer
Aspekte (Logistics in automobile enterprise including the communication
technique aspects).
1995
Gunther Bolte; Michael Kröger; Frank Schulz
Computerschrott-Recycling (Computer scrap – recyling)
1994
Ulrich Cordes
Programmierung einer Drei-Achsen-CNC-Maschine in Modelltechnik (Programming
a 3 axial CNC-Maschine in model technique)
1994
Stefan Schneider
Konzept einer Modellfabrik für PKW-Produktion (Concept of a model factory
for PKW-Production)
1993/94
Konstantin Sedlan
Plausibilitätstest und Optimierung eines zielgerichteten und zufallsgesteuerten
Bahnplanungsalgorithmus (Plausibility test and optimisation of a specific and
random control of
1993
Ulrich Körbel
Definition der DXF-Geometrieschnittstelle für den Simulator SIMFLEX/2(Definition
of DXF-Geometric interface fort he Simulator SIMFLEX/2)
1992
Peter Ebel; Rüdiger Schmidt
Zufallszahlengeneratoren - Möglichkeiten der Erzeugung von Zufallszahlen
durch ausgewählte Generatoren und Auswertung der Ergebnisse (Random number
generator – Possibility of the generating random number by selecting the
generator and evaluating the results)
1992
Thomas
Riemenschneider
Entwicklung und Bau eines fahrerlosen einer Materialflußanlage mit
Ankopplung an den Fabriksimulator SIMFLEX/2 (Develop and build a material flow
plant without driver and couple it to the factory simulator SIMFLEX/2)
1991
Torsten Vogt
Programm zur Strukturanalyse von Pascalquelltexten auf einem PC-kompatiblen
Rechner(Program for structure analysis of Pascal source codes in a
PC-Compatible computer)
1991
Norbert Kling
Neue Technologien im Büro und deren Auswirkungen auf die Arbeitswelt am
Beispiel eines Betriebes der Textil- und Bekleidungsindustrie (New technologies
in the office and their effects on the working sphere – textile and clothing
industry i staken as example.
1990
Ralph Koch
Symbolische Darstellung der Datenstruktur des Fabriksimulators SIMFLEX/2
mit CAD (Symbolic representation of the date structure of factory simulator
SIMFLEX/2 with CAD)
1990
Hartmut Mench
Erstellung von Pascal-Proceduren zur Stringverarbeitung (Creating a
Pascal-procedure for string processing)
1989
Volker Gerbig
Erstellung von PASCAL-Prozeduren zur graphischen Zeichenausgabe(Building of
graphical output from PASCAL-procedures)
1989
Jochen Carstens-Behrens
Testprogramm für den LisPas Modul (Test program for LisPas module)
1989
Ralf Cordes
Konzeption und Implementierung eines Funktionsbausteins zur CAD-gestützten
Fabrikflächenplanung und –analyse (Concept and
implementation of a functional module for CAD supported factory surface
planning and analysis)
1989
Wolfgang Hege; Urban Lankes
Entwicklung eines fahrerlosen Transportsystems in mechanischer
Modelltechnik (Development of driverless transport system in mechanical
modelling)
1988/89
Frank Jankowski; Klaus Dippel
Einbindung der Graphpas-Routinen in die Maschinenversion V1(Interface of
graphical-routines in the machine version VI)
1988
Bernd Kreuzer; Manfred Hahn
Entwicklung des Modells eines Drehpuffers mit einer Testumgebung zur
graphischen und logischen Beschreibung von Materialflußsystemen (Development of the model of a turning buffer with a test
environment for the graphic and logical description of flow of material systems)
1988
Blumenstein; A. Sprick; F. Wagner
Entwicklung eines Baukastensystems aus Fischer-Technik-Bausteinen für ein
computergesteuertes Simulationsmodell (Development of construction kit from
Fischer-technique building blocks for a computer controlled simulation model)
1988
Axel Gück
Flexible Transferstraßen im Werk Kassel der Volkswagen AG (Flexible transfer lines in
kassel works of Volkswagen AG)
1987/88
Matthias Wiegand
Überarbeitung des Statistischen Dialogsystems (SDS) (Revision of Statitical
dialog systems)
1987
Uwe Geiersbach
Graphisches Auswerte-Programm GAP (Graphic interpretative program)
1987
Thomas Kaufmann; Rainer Böhnke
Verkabelungsgenerator für Modellsteuerung (Wiring generator for model
controllers)
1986
Thomas Hasse; Robert Thiel
Der Einsatz von CAD zur Erstellung von Materialflußeinheiten der
Modelltechnik (The employment of CAD to the production flow of material units
in the model technique)
1986
Frank Dumeier; Holger Krug
Entwicklung einer Hardcopyeinrichtung für die Layouterstellung von
Materialflußsystemen (Development of a hard copy facility for the material flow
system)
1986
Horst Raschke
Die TERMPAS-Schicht, ein Software-Werkzeug zur Ansteuerung alphanumerischer
Terminals in elektronischen Datenverarbeitungsanlagen (The TERMPAS-layer, a
software tool for the control of alphanumeric terminals in electronic data
processing systems)
1985
Michael Sinapius
Erstellung eines Bibliographie-Programms (Building of bibliography
programs)
1985
Peter Dröfke; Uwe Papengut; Recep Kolukisa; Karl Weisensee
Aufbau eines Eprom-Burners (Build an EPROM-burners)
1985
Karl Weisensee
Aufbau eines
vierkanäligen, drahtlosen Übertragungsweges hoher Übertragungssicherheit zur
Ansteuerung von Kleinmotoren
1985
Otto Grohmann; Herbert Machill
Imlacgrafik Software und Testprogramm(Imlac graphic software and test
program)
1985
Joachim Eigenbrod; Waldemar Lafery; Walter Ott
Aufbau und Steuerung eines Flexiblen-Fertigungssystem-Modells (Building
and control of a flexible production system model)
1985
Horst Müller; Udo Hartke
Graphische Darstellung und Steuerung von Materialflüssen im flexiblen
Fertigungssystem (Graphical display and control of material flow in flexible
production system)
1983
Helmut Beyermann; Stephan Neuschaefer-Rube; Ulrich Neuschaefer-Rube
Datenauswertung mit PASCAL (Data evaluation with PASCAL)
1982/83
Timo
Götte
Erstellung eines Dokumentationssystems in der Programmiersprache PASCAL (Producing
a documentation system in PASCAL Programming language)
1980 |