Publikationen

  • Mohammed Tloul, Michael H. Schwarz, Josef Börcsök, "Formal Verification of Dynamical Control Systems (Addressing Integral Windup Phenomena Using Model-Checking)", WSEAS Transactions on Systems and Control, vol. 18, pp. 393-400, 2023, DOI: 10.37394/23203.2023.18.41 
  • Aseel Elhawawsha, Carla Zeine, Roy Abi Zeid Daou, Dominik Kalinowski, Joseph Khattar, Samer Telawi, Josef Börscök, "Design of a novel safe approach to monitor drivers while operating their cars", DOI:10.1109/ICABME59496.2023.10293128  
  • R. ABI ZEID DAOU, R. FAHED, A. ABDUL RAZZAK, S. ABOU HAYDAR, J. BOERCSOEK, A. HAYEK, and J. SERRANO – Design and Implementation of a Smart Chair with an IOT Application to Monitor Kids While Gaming

  • W. HANNA, L. BOUERI, J. KOUSSAIRY, R. ABI ZEID DAOU, A. HAYEK and J. BÖRCSÖK – Design and Implementation of a safe overbed table that helps healthcare providers during COVID-19 pandemic, November 2021, DOI: 10.1109/ICABME53305.2021.9604858

  • G. EL-HAJAL­, R. ABI ZEID DAOU, Y. DUCQ and J. BÖRCSÖK – Securing an IoT Medical System using AI and a Unidirectional Network Device: Application to a Driver, November 2021, DOI: 10.3233/FAIA210425

  • J. HAIDAR AHMAD, A. ASMAR, R.ABI ZEID DAOU, A. HAYEK, J. BÖRCSÖK and J. SARRANO – Design and Implementation of an Instrumented walking cane for Detection of Freezing of Gait, December 2021, DOI: 10.1109/IMCET53404.2021.9665625

  • Schepers, D.; Börcsök, J.; Bodenröder, L.; Rieger, F.: „Simulation and Mathematical Description of Mechanical Shocks Caused by Brake Actuation on Electric Motors“, International Journal of Circuits, Systems and Signal Processing, 2021, DOI: 10.46300/9106.2020.14.130

  • Krini, Abderrahim & Börcsök, Josef. (2021). A new Estimation Method for Automotive Multidimensional Metrics. Advances in Safety, Reliability and Risk Management, ESREL 2021, Taylor & Francis Group, France, 2021.
  • Krini, Abderrahim & Börcsök, Josef. (2021). Improvement, application and verification of a new multivariate forecasting model for real industry related issues. Advances in Safety, Reliability and Risk Management, ESREL 2021, Taylor & Francis Group, France, 2021.
  • Mohamed Abdelawwad, Torsten Borowski, Josef Börcsök, Malte Drabesch, Manfred Hägelen, Michael H. Schwarz, Christian Voß and Christian Zech. "Überwachung des Mensch-Roboter-Kollaborationsraums mittels Millimeterwellen-Radar" Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 116, no. 6, 2021, pp. 377-381. https://doi.org/10.1515/zwf-2021-0108
  • Josef Börcsök, Waldemar Müller, Eike Hahn, “ReSCU-V2: SIL3 Safe-SoC according to IEC 61508,” EP Activity Report, EUROPRACTICE 2021.
  • Josef Börcsök, Waldemar Mueller, Eike Hahn, Michael H. Schwarz, Mohamed Abdelawwad, "Safe-System-on-Chip for Functional Safety", 2021 18th International Multi-Conference on Systems, Signals & Devices (SSD), March 22-25, 2021, Monastir, Tunisia.
  • Mohamed Abdelawwad, Malte Drabesch, Michael H. Schwarz, Muhammad Ikram Hafiz, Josef Börcsök, "Communication SoC based on 1oo2D architecture for industrial human-robot-collaboration", 2021 18th International Multi-Conference on Systems, Signals & Devices (SSD), March 22-25, 2021, Monastir, Tunisia.
  • Muhammad Ikram Hafiz, Mohamed Abdelawwad, Waldemar Mueller, Eike Hahn, Josef Börcsök, "SoC approach for low cost and low power consumption based on ARM Cortex M3 according to ISO 26262", 2021 18th International Multi-Conference on Systems, Signals & Devices (SSD), March 22-25, 2021, Monastir, Tunisia.
  • Roy Abi Zeid Daou, Elie Boutros, Tony Youssef, Ali Hayek, Josef Börcsök, " Design and Implementation of a Safe Medical Box to Maintain Insulin Pens in Good Conditions", 2021 18th International Multi-Conference on Systems, Signals & Devices (SSD), March 22-25, 2021, Monastir, Tunisia, DOI: 10.1109/SSD52085.2021.9429342
  • Richard Thum, Josef Börcsök, "Enhancement of Reliability and Precision of Navigation by Odometry", 2021 18th International Multi-Conference on Systems, Signals & Devices (SSD), March 22-25, 2021, Monastir, Tunisia.
  • S. HALABY, G. KHOURY, R.ABI ZEID DAOU, A. HAYEK and J. BÖRCSÖK – Novel Approach of a Smart Medical Mirror System for Medical Applications, DOI:  10.1109/MECBME47393.2020.9265149
  • N. HALABI, R.ABI ZEID DAOU, R. ACHKAR, A. HAYEK and J. BÖRCSÖK – Comparative Study for Classification Methods to Predict and Detect Epilepsy Seizure, DOI: 10.1109/MECBME47393.2020.9265151
  • R.ABI ZEID DAOU, J. CHEHADE, G. ABOU HAIDAR, A. HAYEK, J. BÖRCSÖK and J. SARRANO – Design and Implementation of Smart Shoes for Blind and Visually Impaired People for More Secure Movements, DOI: 10.1109/ICM50269.2020.9331779
  • Krini, Abderrahim & Börcsök, Josef. (2020). Improvement and Verification Methods for Components/Systems in Automobile Applications in the Field of Reliability Forecasting with Respect to One and Two Dimensions of Stress Factors. Advances in Safety, Reliability and Risk Management, ESREL 2020, Taylor & Francis Group, Italy, 2020.
  •  Krini, Abderrahim & Börcsök, Josef. (2020). Reliability Forecasting for Components/Systems with Respect to 1-, 2- and 3- Dimensions of Stress Factors. Advances in Safety, Reliability and Risk Management, ESREL 2020, Taylor & Francis Group, Italy, 2020.
  • Richard Thum, Josef Börcsök, “Reliability Monitoring of Laser Scanner Based Navigation,” International Journal of Computers, vol. 14, 2020, doi: 10.46300/9108.2020.14.11
  • Josef Börcsök, Muhammad Ikram Hafiz, Ahmed Alsuleiman, Michael Schwarz, and Mohamed Abdelawwad, “Safe Position Detection Based on Safety System-on-Chip (SSoC) for Wireless IoT Application,” International Journal of Circuits, Systems and Signal Processing, vol. 14, 2020, doi: 10.46300/9106.2020.14.132.
  • Josef Börcsök, Waldemar Müller, Eike Hahn, Michael Schwarz, and Mohamed Abdelawwad, “Approach for a Safe-SoC for Cyber-physical Application according to IEC 61508,” International Journal of Computers, vol. 14, 2020, doi: 10.46300/9108.2020.14.12.
  • Michael Schwarz, Larissa Gaus, and J. Börcsök, “Investigation of a Safety Parameter Observer for Wireless Communication,” International Journal of Circuits, Systems and Signal Processing, vol. 14, 2020, doi: 10.46300/9106.2020.14.128.
  • Mohamed Abdelawwad, Malte Drabesch, Christian Voss, Michael Schwarz, and Josef Börcsök, “SoC-approach for Safety-oriented Multi-channel Communication in Industrial Application of Human-robot-collaboration (HRC),” International Journal of Computers, vol. 14, 2020, doi: 10.46300/9108.2020.14.10.
  • L. Gaus, M. Schwarz and J. Börcsök, 2020, A theoretical approach to a safety-based predictive adaptation of wireless communication channel parameters in harsh environments. Safety in Extreme Environments. Volume 2, Issue 1, April 2020 pp. 93-101 ISSN: 2524-8170 (Print) 2524-8189 (Online).
  • Wahab, E. A., El-Maaref, A. A., Shaaban, K. S., Börcsök, J., & Abdelawwad, M. (2020). Lithium cadmium phosphate glasses doped Sm3+ as a host material for near-IR laser applications. Optical Materials, 110638.
  • A.A. El-Maaref, E.A. Abdel Wahab, Kh.S. Shaaban, M. Abdelawwad, M.S.I. Koubisy, J. Börcsök, El Sayed Yousef (2020), Visible and mid-infrared spectral emissions and radiative rates calculations of Tm3+ doped BBLC glass,Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, doi: 10.1016/j.saa.2020.118774.
  • A. Ghaneizadeh, M. Joodaki, J. Börcsök, A. Golmakani and K. Mafinezhad, "Analysis, Design, and Implementation of a New Extremely Ultrathin 2-D-Isotropic Flexible Energy Harvester Using Symmetric Patch FSS," in IEEE Transactions on Microwave Theory and Techniques, vol. 68, no. 6, pp. 2108-2115, June 2020, doi: 10.1109/TMTT.2020.2982386.
  • Shaaban, Kh.S.; Abdel Wahab, E. A.; El-Maaref, A. A.; Abdelawwad, M.; shaaban, E. R.; Yousef, El Sayed; Wilke, H.; Hillmer, H.; Börcsök, J. (2020): Judd–Ofelt analysis and physical properties of erbium modified cadmium lithium gadolinium silicate glasses. In Journal of Materials Science: Materials in Electronics. DOI: 10.1007/s10854-020-03065-8.
  •  
  • H. HALABI, R.ABI ZEID DAOU, R. ACHKAR, A. HAYEK and J. BÖRCSÖK – Prediction and detection of epilepsy seizure using wearable sensors and ANN computation, DOI: :10.1109/ACTEA.2019.8851094
  • G. HAJAL, R.ABI ZEID DAOU, Y. DUCQ and J. BÖRCSÖK – Designing and validating a cost effective safe network: application to a PACS system, DOI:  10.1109/ICABME47164.2019.8940252
  • Krini, Abderrahim & Börcsök, Josef. (2019). Improvement Approaches in the Field of Reliability Forecasting for Components/Systems in Automobile Applications with Respect of Multivariate Stress Factors. Advances in Safety, Reliability and Risk Management, ESREL 2019, Taylor & Francis Group, Germany, 2019.
  • Krini, Abderrahim & Börcsök, Josef. (2019). Forecasting Reliability of Components/Systems in Automobile Applications with Respect to three Variables of Stress in Field based on Neural Network. Advances in Safety, Reliability and Risk Management, ESREL 2019, Taylor & Francis Group, Germany, 2019.
  • Schwarz M.H., Börcsök J., Verified Digital Controller Operating on Programming Logic Controllers for Process Control, 4thWorkshop & Symposium on Safety and Integrity Management of Operations in Harsh Environments July15-17, 2019, St. John’s, NL, Canada
  • Gaus L. Schwarz M.H., Börcsök J., A Mathematical Approach to a Real-Time Optimization of Safety Parameters in Wireless Communication Systems, 4thWorkshop & Symposium on Safety and Integrity Management of Operations in Harsh Environments July15-17, 2019, St. John’s, NL, Canada
  • Larissa Gaus, Michael Schwarz and Josef Börcsök, Estimation of Optimal Safety Parameters for a Communication Channel with Required SIL 3 at runtime. 29th European Safety and Reliability Conference, (ESREL), 22 – 26 September 2019, Hannover, Germany
  • Krini, Abderrahim & Börcsök, Josef. (2018). Reliability forecasting of components/systems in automobile applications by using two-dimensional stress functions. 10.1201/9781351174664-116.
  • R. ABI ZEID DAOU, E. GEAGEA, M. SFEIR, A. HAYEK and J. BÖRCSÖK - Control of a powerpoint presentation using eye movements – International Journal of New Computer Architectures and Their Applications – ISSN 2220-9085 (online), Vol. 8, No. 2, pp. 61-64, 2018.
  • R. ABI ZEID DAOU, H. ZEIDAN, K. KARAM, A. HAYEK and J. BÖRCSÖK - Design of a safe and smart medicine box – International Journal of Biomedical Engineering and Science (IJBES), – ISSN 2394-0832 (online), Vol. 5, No. 3/4, pp. 1-13, 2018.
  • 7. H. ZEIDAN, K. KARAM, R. ABI ZEID DAOU, A. HAYEK and J. BÖRCSÖK – Smart medical box system - IEEE International Multidisciplinary Conference on Engineering Technology (IMCET) – November 2018, Lebanon
  • M. Abdelawwad, A. Hayek, A. Alsuleiman and J. Börcsök, "FPGA Implementation of a Safety System-on-Chip Based on 1oo4 Architecture Using LEON3 Processor," 2018 International Conference on Computer and Applications (ICCA), Beirut, Lebanon, 2018, pp. 231-235. doi: 10.1109/COMAPP.2018.8460288
  • A. R. Khatri, A. Hayek, and J. Börcsök, “Validation of the Proposed Fault Injection , Test and Hardness Analysis for Combinational Data-flow Verilog HDL Designs under the RASP-FIT Tool,” in 2018 IEEE 16th Int. Conf. on Dependable, Autonomic & Secure Comp., 16th Int.  Conf. on Pervasive Intelligence & Comp., 4th Int. Conf. on Big Data Intelligence & Comp., and 3rd Cyber Sci. & Tech. Cong., (Athens, Greece), pp. 544–551, IEEE Comput. Soc, 2018.
  • A. R. Khatri, A. Hayek, and J. Börcsök, “RASP-TMR: An Automatic and Fast Synthesizable Verilog Code Generator Tool for the Implementation and Evaluation of TMR Approach,” International Journal of Advanced Computer Science and Applications, vol. 9, no. 8, pp. 590–597, 2018.
  • Khatri, A. R., Hayek, A., & Börcsök, J. RASP-FIT: A Fast and Automatic Fault Injection Tool for Code-Modification of FPGA Designs. International Journal of Advanced Computer Science and Applications, 9 (10), 30–40. October 2018.
  • A. HAYEK, S. TELAWI, J. Klos, J. BÖRCSÖK, and R. ABI ZEID DAOU - Smart Wearable System for Safety-related Industrial IoT Applications¬ - 4th EAI International Conference on Safety and Security in Internet of Things – November 2017, Spain
  • R. A. Z. Daou, E. Geagea, M. Sfeir,  A. Hayek and J. Boercsoek, Control of a Powerpoint Presentation using Eye Movements,"  Fourth International Conference on Computer Science, Computer Engineering, and Education Technologies (CSCEET2017), IEEE Proceedings, Beirut, Lebanon, April 2017
  • A. Hayek, S. Domes, J. Klos and J. Boercsoek, "Adapting Raspberry Pi to Miniaturized Safety Systems for Industry 4.0 Control Applications," 14th IEEE International Multi-Conference on Systems, Signals & Devices (SSD), IEEE Proceedings, Marrakech, Morrocco, March 2017, ISBN: 978-1-5386-3175-1
  • R. A. Z. Daou, F. Maalouf, C. Geagea, A. Hayek and J. Boercsoek, "Design of a low cost equipment that may limit Sudden Infant Death Syndrome,"  Fourth International Conference on Advances in Biomedical Engineering (ICABME), IEEE Proceedings, Beirut, Lebanon, 2017, pp. 1-4, ISBN: 978-1-5386-1642-0, DOI: 10.1109/ICABME.2017.8167562
  • Khatri A.R., Hayek A., Börcsök J. : Validation of Selecting SP-values for Fault Models under Proposed RASP-FIT Tool, 2017 International Conference On Latest trends in Electrical Engineering & Computing Technologies (INTELLECT 2017),15 - 16 NOVEMBER, KARACHI, PAKISTAN,2017.
  • Schwarz M.H., Börcsök J., 2017: Digital Controller Design Using A Reliable Code Generation Framework. 3rd Workshop & Symposium
  • Safety and Integrity Management of Operations in Harsh Environments, C-RISE3, October 18-20, 2017, St. John’s, NL, Canada.
  • Ali Hayek and Josef Börcsök, 2017: Advances in On-Chip Safety Systems According to Safety Standards. 3rd Workshop & Symposium
  • Safety and Integrity Management of Operations in Harsh Environments, C-RISE3, October 18-20, 2017, St. John’s, NL, Canada.
  • Khatri A.R., Hayek A., Börcsök J. : Validation of Selecting SP-values for Fault Models under Proposed RASP-FIT Tool, 2017 International Conference On Latest trends in Electrical Engineering & Computing Technologies (INTELLECT 2017),15 - 16 NOVEMBER, KARACHI, PAKISTAN, 2017.
  • Krini J. and Börcsök J., 2017: Calculation of the PFD average by a MooN architecture system. 27TH EUROPEAN SAFETY AND RELIABILITY CONFERENCE ESREL 2017; ESREL 2017, June 18-22, 2017 in Portoroz, Slovenia.
  • Ali Hayek, Samer Telawi and Josef Börcsök, 2017: Smart Wearable System for Safety-related Industrial IoT Applications, SaSeIoT 2017 – 4th EAI International Conference on Safety and Security in Internet of Things, November 6, Valencia, Spain, DOI: https://doi.org/10.1007/978-3-319-93797-7_17. , ISBN: 978-3-319-93796-0
  • Samer Telawi, Ali Hayek and Josef Börcsök, 2017: Safety-Related Wireless Communication via RF Modules for Industrial IoT Applications, SaSeIoT 2017 – 4th EAI International Conference on Safety and Security in Internet of Things, November 6, Valencia, Spain.
  • Khatri A.R., Hayek A., Börcsök J. : Hardness Analysis and Instrumentation of Verilog Gate Level Code for FPGA-based Designs. In: Wong S., Beck A., Bertels K., Carro L. (eds) Applied Reconfigurable Computing. ARC 2017. Lecture Notes in Computer Science, vol 10216. Springer, Cham.
  • M. Abdelawwad, A. Hayek, A. Alsuleiman, J. Börcsök, 2017: 1oo4 Safety System-on-Chip Design, Implementation and Verification Using LEON3 Processor, International Conference on Physics, Materials Sciences and Engineering (ICPMSE2017), March 23-25, 2017, Luxor, Egypt.
  • Krini, A. & Detzel, J. & Börcsök, J. (2016). A New idea to Remanufacture safety-related Components with Respect to Reliability. 10.1201/9781315374987-222.
  • Emil Gracic, Ali Hayek, Josef Börcsök, "Implementation of a Fault-Tolerant System using Safety-Related Xilinx Tools Conforming to the Standard IEC 61508," 2016 International Conference on System Reliability and Science, November 15-18, Paris, France, 2016.
  • Hayek A. and Börcsök J., 2016: Miniaturized Safety PLC on a Chip for Industrial Control Applications. 13th International Conference of Distributed Computing and Artificial Intelligence (DCAI16), June 01-04. Sevilla, Spain.
  • Halabi N., Achkar R., Abi Zeid Daou R., Hayek A. and Börcsök J., 2016: Design and testing tool for a Safe Monitoring System for Neurodegenerative Disorder Patients. 3rd International Conference on Advances in Computational Tools for Engineering Applications (ACTEA16), July 13-15; Zouk Mosbeh, Lebanon.
  • Abi Zeid Daou R., Daccache R., Andary G., Hayek A. and Börcsök J., 2016: Design of a Multifunctional Universal Mask for Patients. 3rd Middle East Conference on Biomedical Engineering (MECBME16), October 06-07; Beirut, Lebanon.
  • Krini J., Krini O., Krini A. and Börcsök J., 2016: Extended Approach for the Prediction of Critical Errors in Software Systems. European Safety and Reliability Conference 2016; ESREL 2016, September 25-29, 2016 in University of Strathclyde Glasgow, Scotland.
  • Krini J., Krini A., Krini O. and Börcsök J., 2016: Approach to improving the reliability prediction for Software Systems. International Journal of Applied Mathematics, Electronics and Computers; ISSN: 2147-82282147
  • Krini J., Krini O., Krini A. and Börcsök J., 2016: Extended Approach to Selecting a project-specific Reliability Growth Model. 39th International Convention on Information and communication Technology, Electronics and Microelectronics (Mipro 2016), 30 May - 03 June 2016, Opatija, Croatia.
  • Krini J., Krini O., Krini A. and Börcsök J., 2016: Extended Approached to improve Reliability Growth Models with Fault-Injection-Method. 2nd International Conference on Cloud Computing Technologies and Applications, CluedTech’16, 24-26 May 2016, Marrakesh, Morocco.
  • Ali Hayek, Josef Börcsök, Samer Telawi and Christian Bieler: Adoption of Miniaturized Safety-Related Systems for Industrial Internet-of-Things Applications. 3rd EAI International Conference on Safety and Security in Internet of Things, October 26–27, Paris, France, 2016.
  • Schwarz M.H., Sheng H., Üstoglu I., Chabaan W., Börcsök J., 2016: Reliable Code Generation and Test Environment demonstrated on a PI-Controller Design. 14th IFAC Symposium on Control in Transportation SystemsCTS 2016 — Istanbul, Turkey, 18—20 May 2016. Volume 49, Issue 3, 2016, Pages 465–470.
  • A. R. Khatri, A. Hayek and J. Börcsök, "ATPG method with a hybrid compaction technique for combinational digital systems," 2016 SAI Computing Conference (SAI), London, 2016, pp. 924-930.

A. Krini, and J. Börcsök, (2015)" New Approach to Remanufacturing Automotive Steering Systems with a Reliability predict Model," 2015 XXV International Conference on Information, Communication and Automation Technologies (ICAT), 2015, pp. 1-7, doi: 10.1109/ICAT.2015.7340541.

R. ABI ZEID DAOU, E. ADD, F. NAKHLE, A. HAYEK and J. BÖRCSÖK – Patient Vital Signs Monitoring via Android Application - The Third International Conference on Advances in Biomedical Engineering (ICABME 2015) – Sept 2015, Beirut Lebanon, DOI:  10.1109/ICABME.2015.7323278

Krini J., Krini O. and Börcsök J., 2015: Optimisation of software reliability prediction. 7th International Conference on MATHEMATICAL METHODS, COMPUTATIONAL TECHNIQUES and INTELLIGENT SYSTEMS (MAMECTIS '15), January 10-12, 2015 in Tenerife, Canary Islands, Spain; ISBN: 978-1-61804-281-1

N.T. Dang Pham, Schwarz M. Börcsök J. 2015. Evaluation of Spurious Trip Rate of SIS dependent on demand rate. WSEAS Conference on Mathematical Methods, Computational Techniques and Intelligent Systems (MAMECTIS 15), Tenerife 10.-12.January 2015, ISBN 978-1-61804-281-1

Daniel Töpel, Josef Börcsök, Formal model for generating railway interlocking software based on a modularized track model. WSEAS Conference on Mathematical Methods, Computational Techniques and Intelligent Systems (MAMECTIS 15), Tenerife 10.-12.January 2015, ISBN 978-1-61804-281-1

Hayek A.,Telawi S.,  Börcsök J., and Daou R.A.Z., 2015: Approach of Safety-Related Monitoring and Analyzing of Human Motion with Limited Sources of Captured Sensory Data, In Proceedings 3rd IEEE International Conference on Technological Advances in Electrical, Electronics and Computer Engineering (TAEECE 2015), 29 April-1 May 2015, Beirut, Lebanon, ISBN: 978-1-4799-5680-7, DOI: 10.1109/TAEECE.2015.7113603

Telawi S., Hayek A., Börcsök J., 2015: Safety-Related System for Detecting and Controlling Vehicles Motion, In Proceedings 3rd IEEE International Conference on Technological Advances in Electrical, Electronics and Computer Engineering (TAEECE 2015), 29 April-1 May 2015, Beirut, Lebanon, ISBN: 978-1-4799-5680-7

Delic E., Löser K., Hayek A., Börcsök J., 2015: Platform Independent Safety-Critical Operating System, In Proceedings The International Conference on Information and Digital Technologies, 7-9 July 2015, Zilina, Slowakei, ISBN: 978-1-4673-7185-8

Krini J., Krini O., Krini A. and Börcsök J., 2015: Design Concept To Improvement The Software Failure Prediction Model With Quality- Factor. International Conference on Advanced Technology & Sciences (ICAT’15), 04-07 August 2015, Antalya, Turkey; ISBN: 978-605-4769-77-3

Krini J., Krini O., Krini A. and Börcsök J., 2015: Proposal for Improvement of a Reliability Growth Model. The 25th ESRA Conference, 07-10 September 2015, Zürich, Schweiz; ISBN: 9781138028791

Krini J. and Börcsök J., 2015: Contribution to reducing the critical faults in critical Software Systems Model. XXV International Conference on Information, Communication and Automation Technologies, October 29-31, 2015 Sarajevo, Bosnia & Herzegovina

Josef Börcsök, Miniaturized Safety Systems: A Way for Future Tasks in Safety Engineering, 2015 XXV International Conference on Information, Communication and Automation Technologies (ICAT) October 29 – October 31, 2015, Sarajevo, Bosnia and Herzegovina

Richard Thum, Josef Börcsök, Error Detection on Precise Laser Scanner Based Navigation. 2015 XXV International Conference on Information, Communication and Automation Technologies (ICAT) October 29 – October 31, 2015, Sarajevo, Bosnia and Herzegovina, ISBN 978-1-4673-8145-1

Hamid Rahmani, Karolin Löser, Richard Thum, Ali Hayek, and Josef Börcsök , CANopen Safety on Safety-Related System-on-Chip, 2015 XXV International Conference on Information, Communication and Automation Technologies (ICAT) October 29 – October 31, 2015, Sarajevo, Bosnia and Herzegovina, ISBN 978-1-4673-8145-1

O. Krini, J. Krini, A. Krini, J. Börcsök, New contribution to the analysis of stochastic
processes for critical systems to increase reliability, 2015 XXV International Conference on Information, Communication and Automation Technologies (ICAT) October 29 – October 31, 2015, Sarajevo, Bosnia and Herzegovina

A. Krini, J. Krini, O. Krini, J. Börcsök, Investigation of a reliability prevention model for remanufactured systems in automotive, 2015 XXV International Conference on Information, Communication and Automation Technologies (ICAT) October 29 – October 31, 2015, Sarajevo, Bosnia and Herzegovina

J. Krini, J. Börcsök, Contribution to reducing the critical faults in critical Software Systems, 2015 XXV International Conference on Information, Communication and Automation Technologies (ICAT) October 29 – October 31, 2015, Sarajevo, Bosnia and Herzegovina,

Krini J. and Börcsök J., 2015: Basic concept for the selection of an appropriate “Software Failure Prediction Model Third World Conference on Complex Systems, November 23-25, 2015 Marrakech, Morocco

N.T. Dang Pham, Schwarz M. Börcsök J. 2015. Effect of Demand Rate on Evaluation of Spurious Trip Rate of a SIS. International Journal of Mathematical Models and Methods in Applied Sciences, Volume 9, 2015, pp. : 487-498, ISSN: 1998-0140.

Walid Chaaban, Michael Schwarz, and Josef Börcsök, Cost Optimization and High Available Heterogeneous Series-Parallel Redundant System Design Using Genetic Algorithms, "Computational Problems in Science and Engineering", Lecture Notes in Electrical Engineering 343. ISBN 978-3-319-15764-1 ISBN 978-3-319-15765-8 (eBook)

Garip G., Üstoğlu I., Mumcu T.V., Kaymakçi Ö.T., Börcsök J., 2014: Hot Box Detection System Design for Railway Vehicle Safety. In proceedings 5th International Conference on Design and Product Development (ICDPD '14), December 15-17, 2014 in Istanbul, Turkey

Siebert A., Schwarz M., Börcsök J., 2014: Programming a safety related PLC with LabVIEW. In proceedings 5th International Conference on Design and Product Development (ICDPD '14), December 15-17, 2014 in Istanbul, Turkey 

Pendli P.K., Schwarz M., Wacker H.D., Börcsök J., 2014: Mathematical Derivations for Safety related Systems with Wireless Communication. In proceedings 5th International Conference on Design and Product Development (ICDPD '14), December 15-17, 2014 in Istanbul, Turkey 

Krini O., Krini J. and Börcsök J., 2014: Proposal to the Modelling of Safety Structures in Vehicle Steering Systems Based on Functional Safety. In proceedings 5th International Conference on Design and Product Development (ICDPD '14), December 15-17, 2014 in Istanbul, Turkey 

Machmur B., Hayek A., Börcsök J., 2014: Designs for FPGA-Based Safety Related Systems.  In proceedings 5th International Conference on Design and Product Development (ICDPD '14), December 15-17, 2014 in Istanbul, Turkey 

Khatri A.R., Milde M., Hayek A., Börcsök J., 2014: Instrumentation Technique for FPGA Based Fault Injection Tool. In proceedings 5th International Conference on Design and Product Development (ICDPD '14), December 15-17, 2014 in Istanbul, Turkey 

Hosseini-Dinani S., Schwarz M., Börcsök J., 2014: Memory Management in Java and Ada Language for Safety Software Development. In proceedings 5th International Conference on Design and Product Development (ICDPD '14), December 15-17, 2014 in Istanbul, Turkey 

Chaaban W., Schwarz M., Börcsök J., 2014: Cost optimization and redundancy allocation of availability constrained heterogeneous series-parallel systems using genetic computing. In Proceedings Mathematical Methods & Computational Techniques in Science & Engineer, November 28-30, 2014, in Athen, Greece

Krini O., Krini J. and Börcsök J., 2014: Challenge to Create an Estimator for Failure-Detection in safety related systems, Mathematical Methods & Computational Techniques in Science & Engineering, November 28-30, in Athen, Greece

Hayek A., Börcsök J., 2014: Safety Chips in light of the Standard IEC 61508:Survey and Analysis, In Proceedings IEEE International Symposium on Fundamentals of Electrical Engineering 2014 (ISFEE 2014), 27-29 November 2014, Bucharest, Romania , ISBN: 978-1-4799-6821-3

Schreiber M., Delic E., Hayek A., Börcsök J., 2014: RAM Tests for Safety-related Architectures: A First Approach, In Proceedings IEEE International Symposium on Fundamentals of Electrical Engineering 2014 (ISFEE 2014), 27-29 November 2014, Bucharest, Romania , ISBN: 978-1-4799-6821-3

Üstoğlu İ., Kaymakçı Ö.T., Börcsök. J., 2014: Effects of Varying Diagnostic Coverage on Functional Safety, In Proceedings IEEE International Symposium on Fundamentals of Electrical Engineering 2014 (ISFEE 2014), 27-29 November 2014, Bucharest, Romania , ISBN: 978-1-4799-6821-3

Ugljesa A., Börcök J., Schwarz M., 2014: Validation and verification a impulse coupling for safe energy generation by rotation, In Proceedings IEEE International Symposium on Fundamentals of Electrical Engineering 2014 (ISFEE 2014), 27-29 November 2014, Bucharest, Romania , ISBN: 978-1-4799-6821-3

Thum R., Bichuniak M., Börcsök J., 2014: Laser Scanner Based Position Detection for Safety Related Applications, In Proceedings IEEE International Symposium on Fundamentals of Electrical Engineering 2014 (ISFEE 2014), 27-29 November 2014, Bucharest, Romania , ISBN: 978-1-4799-6821-3.

Löser K., Delic E., Michael S., Hayek. A., Börcsök J., 2014: The Benefits of Middleware for Safety-Related Systems-on-Chip, In Proceedings IEEE International Symposium on Fundamentals of Electrical Engineering 2014 (ISFEE 2014), 27-29 November 2014, Bucharest, Romania , ISBN: 978-1-4799-6821-3

Krini O., Krini J. and Börcsök J., 2014: Idea to use a detection and correction process for prediction of Critical Faults in Software-Systems. In 2nd World conference on Complex Systems, November 10-12, 2014 Agadir, Morocco

Telawi S., Suna Y., Machmur B., Hayek A., Börcsök J., and Pinders U., Schreiber W. , 2014: Network-Based Safety-Related Vibration and Positio Analysis for Railway Vehicles, In Proceedings 3rd IEEE International Conference on Connected Vehicles and Expo (ICCVE 2014), 3-7 November 2014, Vienna, Austria, ISBN: 978-1-4799-6729-2

Gracic E., Hayek A., Börcsök J. , 2014: Approach to the Development of an FPGA - Based Safety - Related Complete Communication Computer System, In Proceedings10th IEEE International Symposium on Telecommunications 2014 (BIHTEL 2014), 27-19 October 2014, Sarajevo, Bosnia and Herzegovina, ISBN: 978-1-4799-8038-3.

Krini O., Krini J. and Börcsök J., 2014: Challenge for verifying a Digital Filter based on the Functional Safety. In Comadem 2014 - Implications of life cycle analysis in asset and maintenance: 16-18 September 2014, Brisbane Convention and Exhibition Centre, Australia

Krini O., Krini J. and Börcsök J., 2014: Concept for Development of Safety-Related Filters. In Esrel European Safety and Reliability Conference, September 14-18, Wroclaw, Poland

Hayek A., Börcsök J. , 2014: On-chip safety system for embedded control applications, In Proceedings 17th IEEE Mediterranean Electrotechnical Conference , 2014 (MELECON 2014), 13-16 April 2014, Beirut, Lebanon, ISBN: 978-1-4799-2337-3

Pendli P.K., Schwarz M., Wacker H.D., Börcsök J., 2014: Wireless Communication Modeling for Safety Related Systems, North Atlantic University Union (NAUN) Organization, International Journal of Circuits, Systems and Signal Processing, Volume 8, 2014, Oregon, USA, ISSN: 1998-4464. 

Hayek A., Börcsök J. , 2014: Evaluation and Analysis of an on-chip Safety System Architecture, In Proceedings 11th IEEE International Multi-Conference on Systems, Signals and Devices (SSD 2014), 11-14 February 2014, Barcelona, Spain, ISBN: 978-1-4799-3865-0.

Hayek A., Börcsök J. , 2014: Evaluation and Analysis of an on-chip Safety System Architecture, In Proceedings 11th International Multi-Conference on Systems, Signals and Devices (SSD 2014), 11-14 February 2014, Barcelona, Spain, ISBN: 978-1-4799-3865-0

Hayek A., Al-Bokhaiti M., Börcsök J., 2013: Design and implementation of an FPGA-based 1oo4-architecture for safety-related System-on-chips, In Proceedings 25th International Conference on Microelectronics (ICM 2013), 15-18 December 2013, Beirut, Lebanon, ISBN: 978-1-4799-3569-7.

Thum R., Bichuniak M., Boercsoek J., 2013: Safety Related Position Detection via Odometry and Laser Scanner. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Schwarz M. H., Cox C. S., Börcsök J., 2013: A Controller Design Strategy for Closed Loop Identification. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0.

Suna Y., Machmur B., Hayek A., Börcsök J., 2013: Safety - Related Vibration Detection for Vehicular Systems. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Krini O., Krini J., Lamhamdi M., Börcsök J., 2013: Research on the Development of Safety -Related Filters Based on FPGA. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Krini O., El Bahri M., Börcsök J., 2013: Development of Safety Electronic - Components, Devices and Systems - Based on Safety Standard. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Pendli P.K., Schwarz M., Wacker H.D., Boercsoek J., 2013: Safe Wireless Communication for Safety Related Systems. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Delic E., Löser K., Schreiber M., Hayek A., Börcsök J., 2013: SIL3 Graphic Integrated Development Environment for a Safe System - on-Chip. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Wacker H. D., Holub P., Börcsök J., 2013: Estimators and Confidence Intervals for Some Safety Related Parameters. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Sheng H., Schwarz M., Börcsök J., 2013: Proposing a Safety Related System for Continuous Non - Invasive Measurement of Blood Pressure. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Tsoozol P., Börcsök J., Schwarz M., 2013: Execution Time Based Built-in- Testing of Microprocessor. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Hayek A., Schreiber M., Machmur B., Börcsök J., 2013: Design and Implementation of On-Chip Safety Controller in Terms of the Standard IEC 61508. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Börcsök J., Schaefer S., 2013: Bayesian Approach to Reliability Modelling for a Probability of Failure on Demand Parameter. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Töpel D., Hosseini Dinani S., Gaus L., Börcsök J., 2013: Software for Calculation of Complex Safety Parameters for Systems in Safety Critical Applications. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Schwarz M. H., Sheng H., Chaaban W., Börcsök J., 2013: IEC 61131 - 3 Conform Languages Might Become a Bridge between Academic Deve lopment and Industrial Applications. In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Chaaban W., Schwarz  M., Börcsök J., 2013: Cost and Redundancy Optimization of Homogeneous Series - Parallel Multi - State Systems Subject to Availability Constraints Using a Matlab® Implemented Genetic Algorithm.In Proceedings 12th WSEAS, 10-12 December 2013, Budapest, Hungary, ISBN: 978-960-474-349-0

Börcsök J., Krini O., 2013: Tool to Derive and Calculate Safety Parameter. In Proceedings ICAT 2013, October 30 – November 1, 2013, Sarajevo, Bosnia and Herzegovina, ISBN: 978-1-4799-0431-0

Holub P., Börcsök J., 2013: A possible Approach for Determining Safety Parameters for Safety Integrated Circuits. In Proceedings ICAT 2013, October 30 – November 1, 2013, Sarajevo, Bosnia and Herzegovina, ISBN: 978-1-4799-0431-0

Wacker H.-D., Holub P., Börcsök J., 2013: Optimization of Diagnostics with Respect to the Diagnostic Coverage and the Cost Function. In Proceedings ICAT 2013, October 30 – November 1, 2013, Sarajevo, Bosnia and Herzegovina, ISBN: 978-1-4799-0431-0

Schwarz M., Börcsök J., 2013: A Survey on OPC and OPC-UA. In Proceedings ICAT 2013, October 30 – November 1, 2013, Sarajevo, Bosnia and Herzegovina, ISBN: 978-1-4799-0431-0

Sheng H., Schwarz M., Börcsök J., 2013: Modeling a safety-related system for continuous non-invasive blood pressure monitoring. In Proceedings BioCAS, October 31 - November 2, 2013, Rotterdam, Netherlands, ISBN: 978-1-499-1970-8

Machmur B., Hayek A., Börcsök J., 2013: Overview of the Reliability Model for HDL in Safety Related Systems. In Proceedings ESREL 2013, 30 September -  October 2, 2013, Amsterdam, The Netherlands, ISBN: 9781138001237

Hayek A., Machmur B., Schreiber M., Börcsök J., 2013: Safety-Related System-On-Chip Architecture for Embedded Computing Applications. In Proceedings ESREL 2013, 30 September -  October 2, 2013, Amsterdam, The Netherlands, ISBN: 9781138001237

Schwarz M.H., Huiyun Sheng H., Chaaban W., Börcsök J., 2013: A Tool for Reliable Model-based Design for Programming Logic Controllers. In Proceedings ACATTA 2013, 16-17 September 2013, Istanbul, Turkey

Krini O., Börcsök J., 2013: Safety and Reliability in Automotive section. In Proceedings PHM-2013, 8-11 September 2013, Milan, Italy

Chaaban W., Schwarz M. H., Börcsök J., 2013: Budgetary and Redundancy Optimisation of Homogeneous Series-Parallel Systems Subject to Availability Constraints Using Matlab Implemented Genetic Computing. In Proceedings ISSC 2013, 20-21 June 2013, Letterkenny, Ireland, ISBN: 978-1-84919-754-0

Schwarz M. H., Börcsök J., 2013: Reliable System Design with a High Degree of Diagnostic Procedures for Embedded Systems.In Proceedings ISSC 2013, 20-21 June 2013, Letterkenny, Ireland, ISBN: 978-1-84919-754-0

Hayek A., Domes S., Börcsök J., 2013: Internet-controlled Dynamic Reconfiguration for FPGA-based Embedded Systems. In Proceedings ICCIT 2013, 19-21 June 2013, Beirut, Lebanon, ISBN: 978-1-4673-5307-6

Hayek A., Domes S., Börcsök J., 2013: Network-based Dynamic Reconfiguration of FPGAs in Terms of Safety Systems. In Proceedings COMADEM 2013, 11-13 June 2013, Helsinki, Finnland, ISBN: 978-952-67981-0-3

Krini O., Borcsok J., 2013: New Knowledge for realistic Analysis of System Reliability, Availability and Maintainability based on Standard-Norms. In Proceedings COMADEM 2013, 11-13 June 2013, Helsinki, Finnland, ISBN: 978-952-67981-0-3

Machmur B., Hayek A., Börcsök J., 2013: Validation of the Reliability Model for HDL in Safety Related Systems. In Proceedings COMADEM 2013, 11-13 June 2013, Helsinki, Finnland, ISBN: 978-952-67981-0-3

Schreiber M., Delic E., Hayek A., Börcsök J., 2013: Concept for a SIL3 Middleware Encapsulating Safety-related Aspects of Applications for an 8051-based SIL3 Multi-Core System-on-Chip. In proceedings MIPRO 2013, 20-24 May 2013, Opatija, Croatia, ISBN: 978-953-233-076-2

Delic E., Schreiber M., Hayek A., Börcsök J., 2013: Validation of a SIL3 Middleware for Safety-related System-on-Chips. In proceedings MIPRO 2013, 20-24 May 2013, Opatija, Croatia, ISBN: 978-953-233-076-2

Hayek A., Börcsök J., 2013: Safety-Related ASIC-Design in Terms of the Standard IEC 61508. In Proceedings PESARO 2013, 21-26 April 2013, Venedig, Italy, ISBN: 978-1-61208-268-4

Krini O., Borcsok J., 2013: A Scientific Tool for Analysis of Safety Parameters-based on the Siemens Standard SN 29500, CENELEC and Military Handbook. In Proceedings IWMBSA’2013, 25-27 March 2013, Versailles, France

Machmur B., Hayek A., Börcsök J., 2013: Practical Application of the Reliability Model for HDL in Safety Related Systems.In Proceedings CSST'13, 9-11 January 2013, Milan, Italy

Daw Z., Börcsök J., and Vetter M., 2012: Towards safety analysis of model-based embedded software. In Proceedings of Safety Systems for Real-Time Applications in Accordance to International Standards, 2012. 

Hayek A., Börcsök J., 2012: SRAM-based FPGA design techniques for safety related systems conforming to IEC 61508 a survey and analysis. In Proceedings ACTEA 2012, 2nd International Conference in Advances in Computational Tools for Engineering Applications, 12-15 December 2012, Zouk Mosbeh, Lebanon, IEEE Catalog Number: CFP1245-ART, ISBN: 978-1-4673-2489-2, pp. 319-324 

Sheng H., Schwarz M., Börcsök J., 2012: New Concept to Develop a Safety Sensor Network for Continuous Noninvasive Blood Pressure Monitoring. In Proceedings17th IEEE International Conference on Emerging Technologies & Factory Automation,  17-21 September 2012, Krakow, Poland, 2013, ISBN: 978-1-4673-4735-8  

Krini O., Börcsök J., 2012: Fault Detection and Estimation using a Probability Methods. Shenzhen, China, ISBN: 978-1-84919-641-3    

Hayek A., Suna Y., Schreiber M., Börcsök J., 2012: FPGA-Based Wireless Sensor Network for Safety-Related Cognitive Systems.In Proceedings BIHTEL 2012, IX international Symposium on Telecomunications, IEEE Catalog Number: CFP122U-USB, 25-27 October 2012, Sarajevo, Bosnia and Herzegovina, ISBN: 978-1-4673-4874-4

Krini O., Börcsök J., 2012: New scientific contributions to the prediction of the Reliability of Critical Systems which based on Imperfect Debugging method and the increase of Quality of Service. In Proceedings BIHTEL 2012, IX international Symposium on Telecomunications, IEEE Catalog Number: CFP122U-USB, 25-27 October 2012, Sarajevo, Bosnia and Herzegovina, ISBN: 978-1-4673-4874-4

Börcsök J., Ugljesa E., Hayek A., Salihbegovic A., 2012: Degradable on-Chip Safety Controller for Steer-By-Wire Systems with Intra-Chip Communication. In Proceedings BIHTEL 2012, IX international Symposium on Telecomunications, IEEE Catalog Number: CFP122U-USB, 25-27 October 2012, Sarajevo, Bosnia and Herzegovina, ISBN: 978-1-4673-4874-4

Hannen H.-T., Börcsök J., 2012: Adressierungssicherheit von Kommunikationsprotokollen: Anforderungen und wirksame Maßnahmen. atp edition: Automatisierungstechnische Praxis, 54. Jahrgang, Oldenbourg Industrieverlag, 1-2, pp 68-72, ISSN 2190-4111

Obermann D. and Börcsök J., 2012: Two-Way-Compiler: Additional Data Saving for Generating the Original Source Code of a Binary Program. In Proceedings 25th International Conference on Architecture of Computing Systems Workshops (ARCS'12) - Workshop on Dependability and Fault-Tolerance (VERFE), Munich, pp 275-283, ISBN: 978-3-88579-294-9 

Schwarz M. H., 2012: Reliable Software Design using IEC 61131-3 conform Languages Symposium on Security and Safety of Complex Systems. In Proceedings of International Symposium on Security and Safety of Complex Systems, 25-26 May 2012, Agadir, Morocco

Krini O., Börcsök J., Russo L., El Bahri M., Dang Pham N.T., 2012: A New Software-Tool for Determining the Safety-Parameters of Components.  In Proceedings of International Symposium on Security and Safety of Complex Systems, 25-26 May 2012, Agadir, Morocco

Boercsoek J., 2012: Sophisticated Tool for Calculating Safety Loops. In Proceedings of International Symposium on Security and Safety of Complex Systems, 25-26 May 2012, Agadir, Morocco

Ugljesa E., Boercsoek J., Schwarz M., 2012: An Investigation on Safety Related Systems Influenced by an Intrusion Probability. In Proceedings of International Symposium on Security and Safety of Complex Systems, 25-26 May 2012, Agadir, Morocco

Hayek A., Machmur B., Suna Y., Börcök J., 2012: FPGA-Based Wireless Sensor Network Platform for Safety Systems. 19th International Conference on Telecommunications, 23-25 April 2012, Jounieh, Lebanon, ISBN: 978-1-4673-0745-1  

Yordanov Zh., Fuchs E., Löser S., Börcsök J., 2012: Auto-positioning Mount System for Stereoscopic Imaging on Variable Distances. COMADEM 2012, 18-20 June 2012, Huddersfield, UK, doi:10.1088/1742-6596/364/1/012092

Tsoozol P., Börcsök J., Schwarz M., 2012: Instruction based Built-In-Testing of Instruction Multiplexer in Arithmetic Logic Unit. COMADEM 2012, 18-20 June 2012, Huddersfield, UK, doi:10.1088/1742-6596/364/1/012065

Wacker H. D., Pendli P. and Börcsök J., 2012: Data transmission via erasure type channels protected by linear codes. COMADEM 2012, 18-20 June 2012, Huddersfield, UK, doi:10.1088/1742-6596/364/1/012058

 Hayek A., Al-Bokhaiti M., Schwarz M., Börcsök J., 2012: Sophisticated Calculation of the 1oo4-architecture for Safety-related Systems Conforming to IEC61508. COMADEM 2012, 18-20 June 2012, Huddersfield, UK, doi:10.1088/1742-6596/364/1/012059

Krini O., Börcsök J., 2012: A New Method to Detect and Correct the Critical Errors and Determine the Software-Reliability in Critical Software-System. COMADEM 2012, 18-20 June 2012, Huddersfield, UK, doi:10.1088/1742-6596/364/1/012057

Schwarz M. H., 2012: Reliable System Design for Industrial Devices. In Proceedings PSAM 11 & ESREL 2012, 25-29 June 2012, Helsinki, Finnland, ISBN: 978-162-276-4365

Krini O., Börcsök J., 2012: New Algorithm to Predict the residual Number of Critical Software Failure which Based on Imperfect Debugging. In Proceedings PSAM 11 & ESREL 2012, 25-29 June 2012, Helsinki, Finnland, ISBN: 978-162-276-4365 

Pendli P., Schwarz M., Wacker, H.D., Börcsök, J., 2012: Safe Wireless Communication for Safety Related Systems with Bluetooth Technology. In Proceedings PSAM 11 & ESREL 2012, 25-29 June 2012, Helsinki, Finnland, ISBN: 978-162-276-4365  

Wacker H. D., Ugljesa E., Boercsoek J., 2012: A Stochastic Approach to the Probability of Failure on Demand (PFD) with regard to the Standard IEC 61508. In Proceedings PSAM 11 & ESREL 2012, 25-29 June 2012, Helsinki, Finnland, ISBN: 978-162-276-4365

Hayek A. and Börcsök J., 2012: Dynamic Reconfiguration of FPGAs in Terms of Safety Systems. In Proceedings PSAM 11 & ESREL 2012, 25-29 June 2012, Helsinki, Finnland, ISBN: 978-162-276-4365

Zurück