Some papers of the cluster members who fit the research areas:
Schmidt, M.; Freisinger-Shadow, S.; Heim, H.-P.; Mihm, K.-M.; Dilger, K.; Böhm, S.; Wisner, G.: Einsatzmöglichkeiten der Klebtechnik zum Fügen von ultra-hochfestem Beton im konstruktiven Betonbau. Schweißen und Schneiden 62 (2010) Heft 1. S. 26-35Srajbr, C.; Tanasie, G.; Dilger, K.; Böhm, S.: NDT of Laser Beam Welded Single Lap Joints by Active Thermography. Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies, July 16-17, 2009, Singapore, p. 355-359
Bischof, S.; Böhm, S.; Dilger, K.: Non-Contact Flow Measurement of Highly Viscous Adhesives - Controlled Application even for Small Quantities. Adhesion ADHESIVES & SELANTS 9/2009. p. 42-47
Stammen, E.; Böhm, S.; Dilger, K.; Bähr, C.; Büchs, J.: Withstanding the stresses of steam sterilisation. Adhesion ADHESIVES & SEALANTS 4/09. p. 28-32
Frauenhofer, M.; Ströhlein, T.; Fabig, S.; Böhm, S.; Herbeck, L.; Dilger, K.: Induction technique in manufacturing performs. Mechanics of Composite Materials, Vol. 44, No. 5, 2008. Verlag Springer New York, ISSN 0191-5665 (Print) 1573-8922 (Online)
Rathmann, S.; Kerstin, S.; Berndt, M.; Hemken, G.; Raatz, A.; Tutsch, R.; Böhm, S.; Sensor-guided micro assembly of active micro systems by using a hot melt based joining technology. Microsystems Technologies, Vol. 14, No. 12, November 2008, p. 1975-1981, Springer Berlin/Heidelberg, ISSN 0946-7076 (Print) 1432-1858 (Online)
Mott, R.; Brameshuber, W.; Hartung, I.; Dilger, K.; Hegger, J.; Voss, S.; Gries, T.; Barlé, M.: Serial Batch production of building members made of textile reinforced concrete. American Concrete Institute (ACI) Fall Convention 2007, 14. - 18. Okt. 2007. Fajardo, Puerto Rico.
Böhm, S.; Dilger, K.; Tanasie, G.: Qualifizierung zerstörungsfreier Prüfverfahren hinsichtlich ihrer Eignung zur Charakterisierung laserstrahlgeschweißter Überlappverbindungen an Stahl. Schweißen & Schneiden 60 (2008), Heft 6. S. 310-319
Dilger, K.; Böhm, S.: Neueste Klebstoffapplikationsmethoden für wirtschaftliche Prozessketten. ASTK 2007, Schweißtechnik und Fügetechnik - Schlüsseltechnologien der Zukunft, 10. Internationales Aachener Schweisstechnik Kolloquium, Aachen, DE, 24. - 25. Okt, 2007. Aachener Berichte Fügetechnik * (2007) S. 129-139, ISBN 978-3-8322-6644-8
B. Weber, W. Bremser, K. Hiltrop: "Creating new materials with melamine resins" Progress in Organic Coatings, Volume 64, Issues 2-3, Pages 150-155, Februry 2009
Entwicklung von Werkstoffen und Herstellprozessen, Erzeugung von Nanopartikeln und entsprechend strukturierten Werkstoffen, Werkstoffanalytik, Aufbau Organisch-Anorganischer Hybridstrukturen
S. Viala, K. Tauer, M. Antonietti, I. Lacik, W. Bremser: "Structural control in radical polymerization with 1, 1-diphenylethylene. Part 3. Aqueous heterophase polymerization", Polymer 46, (19), 7843-7854 (2005)
Kontrollierte Radiaklische Polymerisation zum Aufbau von selbst aggregierenden Dispersionen, Werkzeuge zur Strukturierung von Polymeren und Dispersionen zur Erzeugung von Werkstoffeigenschaften.
Y. Motoyashiki, A. Brückner-Foit, A. Sugeta, Investigation of small crack behaviour under cyclic loading in a dual phase steel with an FIB tomography technique, Fat. Fract. Engng Mater. Struct. 30 (2007) 556-564
Y. Motoyashiki, A. Brückner-Foit and A. Sugeta, Microstructural influence on small fatigue cracks in a ferritic-martensitic steel, Engng Fract. Mech. 75 (2008) 768-778
M. Besel, A. Brückner-Foit, Surface damage evolution of engineering steel, Fat. Fract. Engng Mater. Struct. 31 (2008) 885-891
A. Brückner-Foit, M. Besel, F. Zeismann, Fatigue properties of a graded steel component, Proceedings of ASME International Mechanical Engineering Congress & Exposition IMECE2009 November 13-19, 2009, Lake Buena Vista, Florida, USA
Y. Motoyashiki, A. Brückner-Foit, L. Englert, L. Haag, M. Wollenhaupt, T. Baumert, Use of femtosecond laser technique for studying physically small cracks, Int: J. .Fract. 139 (2006) 561-568
M. Besel, A. Brückner-Foit, Lifetime prediction of components including initiation phase, J. Engng Gas Turb. Power - Trans. ASME 129 (2007) 542-548
A Brückner-Foit, X. Huang, Numerical simulation of micro-crack initiation of martensitic steel under fatigue loading, Int. J. Fatigue 28 (2006) 963-971
A. Brückner-Foit, X. Huang, On the determination of material parameters in crack initiation laws, Fat. Fract. Engng Mater. Struct. 31 (2008) 980-988
S. Anteboth, A. Brückner-Foit, M. J. Hoffmann, U. Sutter, Th. Schimmel, M. Müller, Electromechanical behaviour of PZT with real domain structure, Comp. Mat. Sci. 41 (2008) 420-429
X. Huang, A. Brückner-Foit, M. Besel, Y. Motoyashiki, Simplified three-dimensional model for fatigue crack initiation, Engng. Fract. Mech. 74 (2007) 2981-2991
Gausemeier, J.; Frank, U.; Radkowski, R.: Using Evolutionary Algorithms to Support the Design of Self-Optimizing Mechatronic Systems. In: Krause, F.-L. (Ed.): The Future of Product Development. Proceedings of the 17th CIRP Design Conference. 26.-28. March 2007, Berlin, 2007
Gausemeier, J.; Brink, V.; Kokoschka, M.; Reymann, F.: Scenario-based Product and Technology Planning. IT-based Strategic Foresight. Proceedings of IAMOT 2009, 18th International Conference for the International Association of Management of Technology, April 5-9, 2009, Orlando, Flordia, USA
Reyes-Perez, M.; Gausemeier, J.; Nordsiek, D.: Ontology Development for a Manufacturing Data Base for Products with graded Properties. In: Proceedings of eKNOW 2009, International Conference on Information, Process, and Knowledge Management, 1-7 February 2009, Cancun, Mexico
Peitz, T.; Gausemeier, J.; Kaiser, I.: Integration von Mechanik und Elektronik - Produktoptimierung mit MID. Konstruktion Juni 6-2009
Dettmer, D.; Brökelmann, J; Gausemeier, J.: Description of Components with Graded Properites. In: Proceedings of the World Congress on Engineering 2009, WCE 2009, July 1 - 3, 2009, London, U.K.
Gausemeier, J.; Frank, U.; Donoth, J.; Kahl, S.: Specification technique for the description of self-optimizing mechatronic systems. In: Research in Engineering Design, Vol. 20, Number 4, November 2009, Springer-Verlag, London, 2009
Gausemeier, J.; Greenyer, J.; Kahl, S.; Pook, S.; Rieke, J.; Schäfer, W.: Consistency Management Between Domain-Spanning Specification and Domain-Specific Models. In: Proceedings of 17th International Conference On Engineering Design, 24-27 August, Standford, USA, 2009
Gausemeier, J.; Brink, V.; Ihmels, S.; Kokoschka, M.; Reymann, F.: Strategic Product and Technology-Planning with the Innvoation-Database. In: Proceedings of IEEE International Conference on Industrial Technology ICIT2009), Gippsland, Victoria, Australia, 2009
Gausemeier, J.; Bauer, F.; Dettmer, D.; Reyes-Perez, M.: Planning of Manufacturing Processes for Graded Components. In: Proceedings of 1st International Conference on Poduct Property Prediction, April 12 - 13, 2010, Dortmund
Gausemeier, J.; Brandis, R.; Reyes-Perez, M.: A Specification Technique for the Integrative Conceptual Design of Mechatronic Products and Production Systems. In: Proceedings of the Design 2010, 11th International Design Conference. Dubrovnik, Croatia, 17 - 20 May, 2010
M. Santa, R. Posner, G. Grundmeier: In-situ study of the deterioration of thiazole/gold and silver interfaces during interfacial ion transport processes, Journal of Electroanalytical Chemistry 643 (2010), 94-101.
Agata Pomorska, Dmitry Shchukin, Richard Hammond, Matthew Cooper, Guido Grundmeier and Diethelm Johannsmann: Positive frequency shifts observed upon adsorbing micron-sized solid object to a quartz crystal microbalance from liquid phase, Anal. Chem. (2010), 82, 6, 2237-2242.
M. Valtiner, G. Grundmeier: Single Molecules as Sensors for Local Molecular Adhesion Studies, Langmuir (2010), 26, 2, 815-820.
P. Thissen, M. Valtiner, G. Grundmeier: Stability of Phosphonic Acid Self-Assembled Monolayers on Amorphous and Single-Crystalline Aluminum Oxide Surfaces in Aqueous Solution, Langmuir (2010), 26, 1.
M. Valtiner, M. Todorova, G. Grundmeier, J. Neugebauer: Temperature Stabilized Surface Reconstructions at Polar ZnO(0001), Physical Review Letters (2009), 103, 6, Article Number: 065502.
R. Posner, G. Giza, R. Vlasak, G. Grundmeier: In situ electrochemical Scanning Kelvin Probe Blister-Test studies of the de-adhesion kinetics at polymer/zinc oxide/zinc interfaces, Electrochimica Acta (2009), 54, 21, 4837-4843.
M. Giza, P. Thissen, G. Grundmeier: Adsorption Kinetics of Organophosphonic Acids on Plasma-Modified Oxide-Covered Aluminium Surfaces, Langmuir (2008), 24, 8688-8694.
M. Valtiner, S. Borodin, G. Grundmeier: Stabilization and acidic dissolution mechanism of single-crystalline ZnO(0001) surfaces in electrolytes studied by in-situ AFM imaging and ex-situ LEED, Langmuir (2008), 24, 5350-5358.
Wang, X., Somsen, Ch., Grundmeier, G.: Ageing of thin Ag/fluorocarbon plasma polymer nanocomposite films exposed to water-based electrolytes, Acta Materialia (2008), 56, 4, 762-773.
M. Valtiner, S. Borodin, G. Grundmeier: Preparation and characterization of hydroxide stabilized ZnO(0001)-Zn-OH surfaces, Physical Chemistry Chemical Physics (2007), 9(19), 2406-2412.
D. Klemm, B. Heublein, H.-P. Fink, A. Bohn: Cellulose: Fascinating Biopolymer and Sustainable Raw Material, Angew. Chem. Int. Ed. 44 (2005) 2-37
J. Kunze, H.-P. Fink: Structural Changes and Activation of Cellulose by Caustic Soda with Urea, Macromol. Symp. 223 (2005) 175-187
M.A. Khan, S. Shehada, A. Bohn, H.-P. Fink: Characterization of biodegradable photocured chitosan films with acrylic monomers, Advances in Chitin Science. Vol. VIII, Eds. H Struszczyk, A. Domard, M.G. Peter, H. Pospieszny. Institute of Plant Protection. Poznan (2005) ISBN 83-89867-25-7
114. H.-P. Fink, S. Fischer: Celluloseverarbeitung - umweltfreundliche Technologien auf dem Vormarsch, Praxis der Naturwissenschaften - Chemie in der Schule 7/54 (2005) 18-25
J. Ganster, H.-P. Fink, M. Pinnow: High-tenacity man-made cellulose fibre reinforced thermoplastics - injection moulding compounds with poly-propylene and alternative matrices, Composites Part A 37 (2006) 1796-1804
J. Ganster, H.-P. Fink: Novel cellulose fibre reinforced thermoplastic materials, Cellulose 13 (2006) 271-280
M.A. Khan, J.Ganster, R. Rihm, H.-P. Fink: Effect of Fire Retardants on the Performance of Jute and Rayon Reinforced Polypropylene Composites, Proceedings of the 6th Global Wood and Natural Fibre Composites Symp., Kassel, 5-6 April 2006, Ed. A.K. Bledzki, V.E. Sperber, ISBN 83-60140-87-1, p. B22/1-6
H.-P. Fink, H. Ebeling, R. Rihm: Fibre Formation from Liquid Crystalline Solutions of Cellulose Carbamate in N-Methylmorpholine-N-Oxide, Proceedings of the 7th Int. Symp. "Alternative Cellulose- Manufacturing, Forming, Properties", Sept. 6-7, 2006, Rudolstadt, p. 13 -23
H. Ebeling, H.-P. Fink, M. Luo, H.-G. Geus: Cellulose Meltblown Nonwovens Using the Lyocell Process, Lenzinger Berichte 86 (2006) 124 -131
T. Röder, J. Moosbauer, M. Fasching, A. Bohn, H.-P. Fink, T. Baldinger, H. Sixta: Crystallinity Determination of Native Cellulose - Comparison of Analytical Methods, Lenzinger Berichte 86 (2006) 85 - 89
H.-P. Heim, H. Ridder: Inflating Functional Channels in the Injection Mould, Kunststoffe plast europe, 02/ 2005
H.-P. Heim: Process Monitoring and Quality Prediction: A Task for the Entire Process Chain, Proceedings SPE - ANTEC ´05, Boston, USA, May 1-5, 2005, S. 3665-3668.
H.-P. Heim: Calculation of Process Capability before series production as precondition for the Design of Multi Component Injection Moulded Parts, Proceedings PPS 21, Leipzig, Juni 2005, paper SL 2-12
H. Potente, H.-P. Heim, S. Kleineheismann, W. Ernst: Experimental Investigations on the Plasticating Process in a Short Single Screw Extruder For Biopolymers, Proceedings SPE - ANTEC 06 in Charlotte, North Carolina, USA, May 7-11.
H. Potente, H.-P. Heim, T. Thümen: Tools for Modelling Single-screw Systems - Part 1: The Possibilities of Computational Methods, Kunststoffe international, 6/2006, pp- 109-113; part 2: Reducing Costs and Optimising Quality, Kunststoffe international, 7/2006, pp. 87-89.
H. Ridder, J. Schnieders, H. Potente, M. Schäfers, H.-P. Heim: Blasformen im Spritzgießwerkzeug, Kunststoffe 9/ 2008, S. 73-77.
H. Ridder, H.-P. Heim: The Possibilities and Limitations of Variable Mold Temperature Control Kunststoffe international, 5/2009, pp. 12-17.
Schmidt, M.; Freisinger-Schadow, S.; Heim, H.-P.; Mihm, K.-M.; Dilger, K.; Böhm, S.; Wisner, G.: Einsatzmöglichkeiten der Klebtechnik zum Fügen von ultra-hochfestem Beton im konstruktiven Betonbau; Schweißen und Schneiden 62 (2010) 1, S. 26-35.
H. Potente, E. Moritzer, M. Schäfers, T. Plugge, H.-P. Heim, H. Ridder: Advanced investigations for the newly developed special injection molding process: "GITBlow"; ANTEC 2010 - Proceedings SPE - ANTEC 2010, Orlando, USA, June 16-20, pp. 2071-2075.
A.K. Bledzki, A. Ries, D. Passmann and H.-P. Heim, Influence Of The Compression Molding Process On Impact Behavior; ANTEC 2010 - Proceedings SPE - ANTEC 2010, Orlando, USA, June 16-20, pp. 369-373.
Jäkel, A.; Li, Q.; Viereck, V. & Hillmer, H. (2010), Nanotechnology and Energy, Pan Stanford Publishing, chapter Active Windows for Daylight Guiding Applications.
Bartels, M.; Köhler, F.; Wittzack, S.; Wang, X. & Hillmer, H. (2008), 'Ultra precise Nanoimprint templates (invited)', NanoS 03.08, 18-22.
Dharmarasu, N. & Hillmer, H. (2008), Comprehensive Microsystems, Elsevier, Amsterdam, chapter Compound semiconductors, pp. 25-55.
Hillmer, H. & Hansmann, S. (2007), Springer Handbook of Lasers and Optics, Springer Verlag, chapter Semiconductor lasers, pp. 695-726.
Kricke, A.; Joodaki, M.; Dharmarasu, N.; Kompa, G. & Hillmer, H. (2007), 'Quasi-monolithic integration of high-power GaN-based HEMTs for high-frequency applications', Semiconductor Science and Technology 22(11), 1245-1248.
Scholz, T.; Debski, T.; Barth, W.; Römer, F. & Hillmer, H. (2006), 'A high-resolution optical study of cantilever heterostructure layer geometries', Journal of Micromechanics and Microengineering 16(12), 2765-2770.
Hasse, A.; Irmer, S.; Daleiden, J.; Dharmarasu, N.; Hansmann, S. & Hillmer, H. (2006), 'Wide continuous tuning range of 221nm by InP / air-gap vertical-cavity filters', Electronics Letters 42(17), 974-975.
Hillmer, H. & Salbeck, J. (2005), Bergmann/Schaefer: Lehrbuch der Experimentalphysik, Festkörper, Walter de Gruyter Verlag, chapter 8. Materialien der Optoelektronik - Grundlagen und Anwendungen, pp. 707-820.
Irmer, S.; Alex, K.; Daleiden, J.; Kommallein, I.; Oliveira, M.; Römer, F.; Tarraf, A. & Hillmer, H. (2005), 'Surface micromachined optical low-cost all-air-gap filters based on stress-optimized Si3N4 layers', Journal of Micromechanics and Microengineering 15(4), 867-872.
Joodaki, M.; Kompa, G. & Hillmer, H. (2005), 'Thermomechanical stress analysis and measurement in quasi-monolithic integration technology (QMIT)', IEEE Transactions on device and material reliability 5(3), 581-594.
Homberg, W.; Hornjak, D.; Beerwald, C.: Manufacturing of complex functional graded workpieces with the friction spinning process; Proceedings of the ESAFORM 2010, Brescia, Italy, 2010.
Homberg, W.; Hornjak, D.; Beerwald, C.: Reib-Drücken - ein innovativer Ansatz zur Herstellung gradierter Bauteile; werkstatttechnik-online 10-2009 S.728-731; Springer VDI-Verlag, 2009.
Tillmann, W.; Vogli, E.; Baumann, I.; Hoffmann, F., Homberg, W.; Beerwald, C.; Hornjak, D.: Functional wear resistant tool surfaces for novel friction-spinning forming process to manufacture parts with graded thermo-mechanical properties; Proceedings Volume, ITSC 2010; Singapore 03./05.Mai 2010.
Shankar, R.; Jadhav, S.; Göbel, R.; Homberg W.; Kleiner M.: Incremental Sheet Metal Forming of Preformed Sheets. Proc. of the 8th Int. Conf. on Technology of Plasticity (ICTP) 2005.
Geiger, M.; Merklein, M.; Lechler, J.; Bach, Fr.-W.; Springer, R.; Kleiner, M.; Homberg, W.; Brosius, A.; Karbasian, H.; Hoffmann, H.; So, H.: Basic investigations on hot sheet metal forming of quenchenable high strength steels. In Proceedings of the 2nd ICNFT, 20.-21.9.2007, Bremen, S. 430-433.
Kleiner, M.; Chatti, S.; Ewers, R.; Hermes, M.; Homberg, W.; Shankar, R.: Process Chain for the Improvement of Hydroforming Processes Using Tailored Semi-Finished Tubes, Annals of the WGP, Production Engineering, Vol. XIII(2006)1, pp. 57-62.
Kleiner, M.; Gösling, M.; Kuhnt, S.; Busch, A.; Homberg, W.; Gather, U.: Parameter Design for High Pressure Sheet Metal Hydroforming of Sculptured Surfaces. Annals of the WGP, Production Engineering, XIII(2006)2, pp.153-156.
Kleiner, M.; Trompeter, M.; Gösling, M.; Homberg, W.; Karbasian, H.; Rauscher, B.: Hydroforming of Partially Cladded Double Blanks. Annals of the WGP, Production Engineering, XIII(2006)2, pp.115-120.
Tekkaya, A. E.; Karbassian, H.; Homberg, W.; Kleiner, M.: Thermo-mechanical coupled simulation of hot stamping components for process design. Production Engineering - Research and Development (2007), Springer, 2007, 1, S. 85-89, ISSN: 0944-6524 (Print).
H. Haouaoui, I. Karaman, H.J. Maier: Flow Stress Anisotropy and Bauschinger Effect in Ultrafine Grained Copper, Acta Mater., 54, 2006, pp. 5577-5488.
H.E. Karaca, I. Karaman, B. Basaran, Y.I. Chumlyakov, H.J. Maier: Magnetic Field and Stress Induced Martensite Reorientation in NiMnGa Ferromagnetic Shape Memory Alloy Single Crystals, Acta Mater., 54, 2006, pp. 233-245.
D.C. Miller, C.F. Herrmann, H.J. Maier, S.M. George, C.R. Stoldt, K. Gall: Thermo-Mechanical Evolution of Multilayer Thin Films: Part II. Microstructure Evolution in Au/Cr/Si Microcantilevers, Thin Solid Films, 515, 2007, pp. 3224-3240.
T. Niendorf, D. Canadinc, H.J. Maier, I. Karaman: On the Microstructural Stability of Ultrafine-Grained Interstitial-Free Steel under Cyclic Loading Metall. Mater. Trans. A, 38A, 2007, pp. 1946-1955.
D. Canadinc, H. Sehitoglu, H.J. Maier, P. Kurath: On the Incorporation of Length Scales Associated with Pearlitic and Bainitic Microstructures into a Visco-Plastic Self-Consistent Model, Mater. Sci. Eng. A, 485, 2008, pp. 258-271.
S. Dendorfer, H.J. Maier, D. Taylor, J. Hammer: Anisotropy of the fatigue behaviour of cancellous bone, J. Biomechanics, 41, 2008, pp. 636-641.
J. Dadda, H.J. Maier, D. Niklasch, I. Karaman, H.E. Karaca , Y. I. Chumlyakov: Pseudoelasticity and Cyclic Stability in Co49Ni21Ga30 Shape Memory Alloy Single Crystals at Ambient Temperature, Metall. Mater. Trans. A, 39A, 2008, pp. 2026-2039.
T. Niendorf, Chr. Burs, D. Canadinc, H.J. Maier: Early Detection of Crack Initiation Sites in TiAl Alloys during Low-cycle Fatigue at High Temperatures Utilizing Digital Image Correlation, Int. J. Mater. Res., 100, 2009, pp. 603-608.
H.-G. Lambers, S. Tschumak, H.J. Maier, D. Canadinc: Role of Austenitization and Pre-Deformation on the Kinetics of the Isothermal Bainitic Transformation, Metall. Mater. Trans. A, 40A, 2009, pp. 1355-1366.
J. Ma, I. Karaman, H.J. Maier, Y.I. Chumlyakov: Superelastic Cycling and Room Temperature Recovery of Ti74Nb26 Shape Memory Alloy Acta Mater., 58, 2010, pp. 2216-2224.
H. Potente, M. Koch, E. Moritzer, et. al.: "Mehrkomponentenverfahren richtig anwenden", Kunststoffe Februar 2005, S. 44-47, Hanser-Verlag, München.
E. Moritzer: Scheinwerferkomponenten aus Duroplast, Kunststoffe November 2006 S. 112-115.
E. Moritzer: Fluch oder Segen - Antikondensatlackierungen für Scheinwerfer, Kunststoffe März 2008 S. 67-69.
E. Moritzer, C. Funke, E. Albring: Filling behaviour of wood-plastic composites (WPC) in the injection moulding process, 8th Global WPC and Natural Fibre Composites Congress June 22-23, 2010 near Stuttgart/Germany.
E. Moritzer, T. Plugge: Prävention gegen Produktpiraterie; Kunststoffe, Ausgabe 3, Jahrgang 09, S. 30, Carl Hanser Verlag, München, 2009.
E. Moritzer, H. Ridder, M. Schäfers, H.-P. Heim, T. Plugge: Advanced investigations for the newly developed special injection molding-process: "GITBlow"; ANTEC Orlando, 2010
E. Moritzer, C. Funke, M. Schulte: Injection-Moulded WPC-Products with genuine wooden surface - two steps in one, 8th Global WPC and Natural Fibre Composites Congress June 22-23, 2010 near Stuttgart/Germany
E. Moritzer, R. Weddige, Ch. Leister: Temperature dependant lap shear strength of adhesively bonded high temperature resistant thermoplastics
E. Moritzer: Structual glueing of plastic parts, 2nd WJS/DVS Conference on joining plastics 2010, Düsseldorf, Germany, November 2, 2010
A. Grüning, M. Lebsanft, B. Scholtes Cyclic stress-strain behavior and damage of tool steel AISI H11 under isothermal and thermal fatigue conditions, Mat. Science and Engineering A527 (2010), S. 1979 - 1985
T. Manns, A. Rothkirch, B. Scholtes: Residual stress determination in surface treated alumina samples applying beam limiting masks, Powder Diffraction, Vol 24 (2009), Issue S1, S. S77 - S81
Krauss, M.; Scholtes, B.: Formation of Twins During Thermal Fatigue of Magnesium Wrought Alloy AZ31. Journal of Solid Mechanics and Materials Engineering 2 (2008), S. 1126-1135
Gibmeier, J.; Scholtes, B.: Instrumented Indentation Testing on Uniaxially Prestressed Steel samples. Materials Science Forum 571/572 (2008), S. 83-88
Grüning, A.; Krauss, M.; Scholtes, B.: Isothermal Fatigue of Tool Steel AISI H11. Steel Res. Int. 79 (2008), S. 111-115
Y. Sano, T. Adachi, K. Akita, I. Altenberger, M. A. Cherif, B. Scholtes, K. Masaki, Y. Ochi, T. Inoue: Enhancement of Surface Property by Low-energy Laser Peening without Protective Coating, Key Engineering Materials 345-346 (2007), S. 1589-1592
Götting, M.; Scholtes, B.: Influence of tension-compression loading history on plastic deformation of Mg wrought alloy AZ31. Int. J. Mat. Res. (Z. Metallkunde) 97 (2006), S. 1378-1383
Hartmann, S.; Gibmeier, J.; Scholtes, B.: Uniaxial tensile test and instrumented indentation test: material parameter identification and finite element simulation. Exp. Mechanics 46 (1) (2006), S. 5-18
Jägg, S.; Scholtes, B.: Crack Tip Residual Stresses and Crack Propagation in Cyclically-Loaded Specimens under Different Loading Modes. Z. Metallkunde 96 (2005), S. 768-772
Steinhoff, K.; Weidig, U.; Scholtes, B.; Zinn, W.: Innovative Flexible Metal Forming Processes based on Hybrid Thermomechanical Interaction. Steel Research 76 (2005), S. 154-159
V. Schöppner, T. Thümen, S. Kleineheismann, P. Gorczyca: Simulation von schnelllaufenden Plastifiziereinheiten, Extrusionstechnik 2007, S. 293-311, VDI-Gesellschaft Kunststofftechnik, ISBN 978-3-18-234287-8
H. Potente, V. Schöppner, L. Wilke, R. Welter: Laserdurchstrahlschweißen: ein experimenteller Vergleich der Verfahrensvarianten, Laser transmission welding: an experimental comparison of the process variants, Joining Plastics 1 (2007), S. 90-97
V. Schöppner, R. Hoffschlag, S. Gövert, J. Schnieders, H. Potente: Zykluszeit einsparen durch intensive Kühlung beim Heizelement-schweißen. Saving cycle time by means of intensive cooling during heated tool welding, Joining Plastics 1 (2008), S. 50-56
H. Potente, V. Schöppner, K. Anger, E. Giese: Messen unter Druck, Kunststoffe 12 (2008), 98. Jahrgang, Carl Hanser Verlag, München, S. 76-79
V. Schöppner, P. Kloke: Modellierung der Glasfaserlängenabnahme beim Compoundieren, VDI-Fachtagung "Aufbereitungstechnik" 2009, Baden-Baden
V. Schöppner, S. Hansen, H. Potente, K. Anger, H. Hörmann: Radial Temperature Modelling inside the Screw Channel for tempered Single Screws, Zeitschrift Kunststofftechnik / Journal of Plastics Technology, 02/2009, p.153-181, Carl Hanser Verlag, München
H. Potente, V. Schöppner, E. Enns, E. Giese, K. Anger: Dynamic Temperature and Pressure Measurement in Polymer Processing, Zeitschrift Kunststofftechnik (WAK) 1 2009, S. 31-47, Hanser Verlag, München
H. Potente, V. Schöppner, D. Bonefeld, L. Wilke, C. Hage: Experiments regarding the influence of pressure profiling on laser-transmission welding, Welding in the World Band 53, 2009, Heft 9/10
V. Schöppner, D. Bonefeld: Optische Eigenspannungsanalyse lasergeschweißter Kunststoffbauteile, Joining Plastics 1 (2010) S.40-47
V. Schöppner, H. Potente, D. Bonefeld, R. Mahnken, A. Shaban: Residual Stresses in the Quasi-Simultaneous Laser Transmission Welding of Amorphous Thermoplastics, Polymer Engineering and Science, Published Online: 18.03. 2010, voraussichtlicher Druck: Mitte 2010
Steinhoff, K.; Weidig, U.; Saba, N.: Investigation of plastic forming under the influence of locally and temporally variable temperature and stress states. In: Steinhoff, K.; Maier, H. J.; Biermann, D. (Hrsg.): Functionally graded materials in industrial mass production. Auerbach : Verlag Wissenschaftliche Skripten, 2009, pp. 35-52
Steinhoff, K.; Göken, J.; Maikranz-Valentin, M.: Damping behaviour of thermomechanically graded materials. In: Steinhoff, K.; Maier, H.J.; Biermann, D. (Edtrs.): Functionally graded materials in industrial mass production. Auerbach: Verlag Wissenschaftliche Scripten, 2009, pp. 365-380
Steinhoff, K.; Saba, N.; Maikranz-Valentin, M.; Weidig, U.: Optimized Processes and Products in Hot Sheet Metal Forming. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 2nd International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2009, pp. 29-42
Maikranz-Valentin, M.; Saba, N.; Weidig, U.; Göken, J.; Steinhoff K.: Investigation on Functionally Graded 51CrV4 and its Damping Behavior. In: Yang, D. Y.; Kim, Y. H.; Park, C. H. (Edtrs.): Advanced Technology of Plasticity 2008. The Korean Society for Technology of Plasticity, 2008, Gyeongju (Korea), pp. 2283-2288
Hardell, J.; Prakash, B.; Steinhoff, K.: High Temperature Tribological Studies on Surface Engineered Tool Steel and High Strength Boron Steel. In: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edtrs.): Proceedings of the 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, GRIPS' Sparkling World of Steel Vol. 1: Proceedings, No. 6 - Bad Harzburg (D): Grips Media GmbH, 2008, pp. 69-76
Maier, H.J.; Tschumak, S.; Weidig, U.; Steinhoff, K.: Functional Gradation of Low Alloy Steel by Differentially Controlled Phase Transformation. steel research int. 79 (2008) 2, pp. 105-110
Maikranz-Valentin, M.; Weidig, U.; Schoof, U.; Becker, H.-H.; Steinhoff, K.: Components with Optimised Properties due to Advanced Thermo-mechanical Process Strategies in Hot Sheet Metal Forming. steel research int. 79 (2008) 2, pp. 92-97
Weidig, U.; Hübner, K.; Steinhoff, K.: Bulk Steel Products with Functionally Graded Properties Produced by Differential Thermo-mechanical Processing. steel research int. 79 (2008) 1, pp. 59-65
Göken, J.; Maikranz-Valentin, M.; Steinhoff, K.; Pavlova, T.S.; Ivleva, T.V.; Golovin, I. S.: Functional gradation and its influence on damping behaviour of 51CrV4 steel. Materials Characterization 59 (2008) 9, pp. 1178-1184
González-Martínez, R.; Göken, J.; Letzig, D.; Steinhoff, K.; Kainer, K.U.: Influence of Aging on Damping of the Magnesium-Aluminium-Zinc-Series. Journal of Alloys Compounds 437 (2007), pp. 127-132
Th. Tröster und W. Rostek, Innovative Warmumformung Seminarband "Neuere Entwicklungen in der Blechumformung", Fellbach, (2004)
J. Berg, Th. Tröster, Ermittlung dynamischer Grenzformänderungs-diagramme für Karosseriestähle, Bericht der Forschungsvereinigung Stahlanwendung P727, ISBN 3-937567-47-X, Verlag- und Vertriebsgesellschaft Düsseldorf, 2007
C.K. Jayasankar, K. Upendra Kumar, V. Venkatramu, W. Sievers, Th. Tröster, and G. Wortmann, Photoluminescence from the 5D4 level of Tb3+ ions in K-Ba-Al fluorophosphate glass under pressure, J. Non-Crystalline Solids 353, 1813-1817 (2007)
J. Böke, R. Erhardt ,W. Rostek, Th. Tröster: "Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau", MP Materials Testing, 11/12 2008
R. Praveena, V. Venkatramu, P. Babu, C.K. Jayasankar, T. Tröster, W. Sievers, and G. Wortmann, Pressure dependent luminescence properties of Eu3+ :TeO2-K2O-Nb2O5 glass J. Phys.: Conf. Ser. 121, 042015 (2008)
Th. Tröster, C. Howe, M. Müller, W. Rostek: "Development status and market potential of hot formed ballistic steels", Seminarband SCT 2008 (2008)
Th. Tröster, W. Rostek, J. Böke, R. Erhardt: "Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau", DVM-Tag 2008 Leichtbaustrategien, Ein wesentlicher Beitrag zur Klimadebatte, DVM-Bericht 675, Berlin (2008)
R. Vijaya, V. Venkatramu, L. Rama Moorthy, C.K. Jayasankar, W. Sievers, Th. Tröster, and G. Wortmann, Pressure dependent luminescence properties of Tb3+-doped K-Ba-Al fluorophosphates glass, High Pressure Research 29, 219-223 (2009)
Weissenberger-Eibl, M./Schwenk, J. (forthcoming 2010): Dynamic Relational Capabilities (DRC) - Dynamische Beziehungsfähigkeiten und interorganisationaler Wissenstransfer von Unternehmen. in: M. Stephan /W.Kerber/T.Kessler/M.Lingenfelder (Hrsg.): 25 Jahre ressourcen- und kompetenzorientierte Forschung. Der kompetenzbasierte Ansatz auf dem Weg zum Schlüsselparadigma in der Managementforschung, Wiesbaden 2010, S.255-276.
Rödel, J./Kounga, A. B.N./Weissenberger-Eibl, M./Koch, D./Bierwisch, A./Rossner, W./Hoffmann, M. J. /Danzer, J./Schneider G. (2009): "Development of a roadmap for advanced ceramics: 2010-2025", in: Journal of the European Ceramic Society 29 (2009) p. 1549-1560.
Weissenberger-Eibl, M./Joachim, K. (2009): Die Technologie-Roadmap als integratives Werkzeug des Innovationscontrollings, in: Controlling- Zeitschrift für erfolgsorientierte Unternehmenssteuerung, 21. Jahrgang, Heft 2 (2009), S. 13 - 18.
Weissenberger-Eibl, M./Joachim, K./Radicke, J. (2009): Neue Wege zur Aktivierung von Forschungspotentialen - Einsichten in das Themengebiet Materialwissenschaften und Werkstofftechnik, in: Bulletin, 35. Jahrgang, Heft 2 (2009), S. 24-30.
Weissenberger-Eibl, M./Radicke, J. (2009): Die TRIZ-Innovationsprinzipien als strategisches Instrumentarium im Patentmanagement von kleinen und mittleren Unternehmen, in: J.-A. Meyer (Hrsg.): Management-Instrumente in kleinen und mittleren Unternehmen, Lohmar 2009, S. 241-256.
Weissenberger-Eibl M./Schwenk J. (2009): "Lifeblood Knowledge" - Dynamic Relational Capabilities (DRC) and Knowledge for Firm Innovativeness and Competitive Advantage' in Measuring Business Excellence, Vol. 13, Issue 2, 7-16.
Weissenberger-Eibl, M./Spieth, P. (2009): Ownership Structure and Corporate Governance Code: The Case of Family Business Enterprises in Germany, in: Corporate Ownership and Control, Vol. 6, Issue 4, Summer 2009, S. 382-390.
Weissenberger-Eibl, M./Spieth, P./Koch, D. (2009): Magnesium Roadmapping and Network Analysis - The Case of the Magnesium Community of German Researchers and Business Representatives, Results from "Erkenntnis-Transfer-Initiative" of DFG SPP 1168, in: Kainer, K. U. (Hrsg.): magnesium 8th International Conference on magnesium Alloys and their Applications, Weinheim 2009, S. 1211-1216.
Weissenberger-Eibl, M./Joachim, K. (2008): Integrating Scenario Planning and indicator-based Early Detection for Scenario Transfer, in: International Journal of Technology Intelligence and Planning, Vol. 4, No. 4, pp. 431-444.
Weissenberger-Eibl, M. (2006): Wissensmanagement in Unternehmens-netzwerken, 2. Auflage, Kassel 2006.
» Back to top