Publications Prof. Jochem

2009

• Jochem, R.; Maier, H.: Identifying and sustainably tapping potential - improvement process and process improvement for sustainable cost reduction for direct and indirect company divisions. In: MQ-Management und Qualität, TÜV Media GmbH (publisher), 7/8 (2009).
   
• Jochem, R.; Geers, D.; Giebel, M: Far more than error prevention! - Presentable QM balance sheets. In MQ - Management und Qualität, TÜV Media GmbH (publisher), 5(2009), pp.11-12.
   
• Jochem, R.: Quality Management Benchmarking - FDA Compliance in Pharmaceutical Industry - A Case Study, In: Prof. Zineldin, M., Janowska, K., Vasicheva, V. (Editors) C & C International Conference & JEP Dissemination Corporation, Competition and HCQM, 2009

2008

• Jochem, R.: Quality-Quick-Check. In Proceedings of the 13th ICIT Conference 2008, 24 - 26.03.2008, Subang Jaya, Malaysia.
   
• Jochem, R.: For all the trees ... The quick check 2008 for your quality management. QZ 02/2008, page 16-17; Carl Hanser Verlag, Munich.
   
• Jochem, R.; Menrath, M.; Landgraf, Katja: From financial to quality-oriented performance measurement - money is not everything. QZ 05/2008; Carl Hanser Verlag, Munich.
   
• Jochem, R.: Quality-Quick-Check. In Proceedings of the 13th ICIT Conference 2008, 24 - 26.03.2008, Subang Jaya, Malaysia.
   
• Giebel, M.; Essmann, H.; Du Preez, N.D.; Jochem, R.: Improved innovation through the integration of Quality Gates into the Enterprise and Product Lifecycle Roadmaps. In Proceedings of the CIRP Design Conference 2008 - Design Synthesis, April 7 - 9, 2008, Enschede, The Netherlands.
   
• Giebel, M.; Essmann, H.; Jochem, R.: Successful innovations through the integration of quality gates in enterprise and product lifecycle roadmaps. In: Goch, G. (ed.): Innovation quality: Quality management for innovations. Shaker Verlag Aachen, 2008. p. 7-22.
   
• Gundlach, C.; Jochem, R.: Six Sigma - continuous improvement with method. In: Gundlach, C.; Jochem, R. (Eds.): Praxis Handbuch Six Sigma Fehler vermeiden, Prozesse verbessern, Kosten senken, p. 339 - 365, Carsten Gundlach, Roland Jochem, Düsseldorf: symposion, 2008.
   
• Jochem, R.; Giebel, M.: Six Sigma tools for SMEs. In: Gundlach, C.; Jochem, R. (eds.): Praxis Handbuch Six Sigma Fehler vermeiden, Prozesse verbessern, Kosten senken, p. 339 - 365, Carsten Gundlach, Roland Jochem, Düsseldorf: symposion, 2008.
   
• Giebel, M.; Essmann, H.; Jochem, R.: Successful innovations through the integration of quality gates in company and product life cycle roadmaps. In: Goch, G. (ed.): Innovation quality: Quality management for innovations. GQW Conference 2008, Bremen, February 14, 2008.
   
• Jochem, R.: Quality-Quick-Check. In Proceedings of the 13th ICIT Conference 2008, 24 - 26.03.2008, Subang Jaya, Malaysia.
   
• Giebel, M.; Essmann, H.; Du Preez, N.D.; Jochem, R.: Improved innovation through the integration of Quality Gates into the Enterprise and Product Lifecycle Roadmaps. In Proceedings of the CIRP Design Conference 2008 - Design Synthesis, April 7 - 9, 2008, Enschede, The Netherlands on April 7, 2008.
   
• Jochem, R.: Quality Management Benchmarking - FDA Compliance in Pharmaceutical Industry - A Case Study, In Proceedings of the 8th C & C International Conference and EU/JEP Dissemination, July 19 - 22 , 2008, Stockholm, Sweden.
   
• Practical handbook - Avoid errors, improve processes, reduce costs - Carsten Gundlach, Roland Jochem, symposion Verlag Düsseldorf, 2007, ISBN 978-3-939707-03-5

2007

• B. Vogel-Heuser, T.Y Sim, A. Wannagat, U. Katzke; FG Eingebettete Systeme, Universität Kassel; R. Jochem; Institut für Arbeitswissenschaft, FG Qualitätsmanagement Universität Kassel: Evaluation und Anwendung von Variantenmodellierung im Maschinen- und Anlagenbau zur Verbesserung der Modulstruktur und Erhöhung der Wiederverwendung, GMA Tagung Karlsruhe
   
• Jochem, R.; Knothe, Th. (2007). Interoperability Requirements derived from Interoperability Dimensions. In: Enterprise Interoperability II, Goncalves, Müller, Mertins, Zelm (Editors) pp. 39-50, Springer Verlag, 2007.
   
• Knothe Th.; Jochem R. Enterprise Modelling Approach based on Maturity and Business Scope perspectives, In Proceedings of the International Conference on Competitive Manufacturing - COMA 07, by Global Competitiveness Centre in Engineering, Department of Industrial Engineering, Sellenbosch, South Africa, 2007.
   
• Jochem R. Organizational Excellence through Qualtity Governanace, In Proceedings of the 1st ICOMP - Qualtity Management Practices for Organizational Excellence, by Institute for Technology and Management and National Centre for Quality Management, Mumbai, 2007.
   
• Jochem, R.; Knothe, Th. (2007). Interoperability Requirements derived from Interoperability Dimensions. In: Enterprise Interoperability II, Goncalves, Müller, Mertins, Zelm (Editors) pp. 39-50, Springer Verlag, 2007.
   
• Jochem R. Organizational Excellence through Qualtity Governanace, In Proceedings of the 1st ICOMP - Qualtity Management Practices for Organizational Excellence, by Institute for Technology and Management and National Centre for Quality Management, 2007

2006

• Knothe, Th.; Jochem, R. (2006). Quality Criteria for Enterprise Modeling in the Context of Networked Enterprises; Proceedings of IESA 2006 Conference; March 22-24, 2006, Bordeaux.
   
• Jochem, R. (2006). Quality Governance based on Enterprise Engineering Method and Six Sigma Approach; Proceedings of 11th ICIT Conference, April 10-12, 2006, Hong Kong.
   
• Jochem, R.: Enterprise Engineering Method supporting Six Sigma Approach, Proceedings of 11th World Congress on Total Quality Management, December 4-6, 2006, Wellington, NZ
   
• Jochem, R.: Quality of models for usage across different organizations - Quality criteria for Enterprise Models regarding Interoperability; INTEROP Workshop TG1; Geneva; 01.02.06
   
• Jochem, R.: Quality Management Systems and Interoperability, INTEROP Workshop WG12; Geneva; 31.01.06;
   
• Jochem, R.:Quality Management - Concept of a Basic Course, 15.03., Ventspils University of Applied Sciences, Latvia.
   
• Jochem, R.: Quality Management - Concept of a Basic Course, 16.03, Riga Technical University, Latvia.
   
• Jochem, R.: Importance of Quality - Requirements, Methods, Trends; IHK Event: Preventive and Innovative Quality Engineering Methods in Development and Construction; IHK Kassel; 23.3.06
   
• Jochem, R.: Added value through more quality - Inaugural lecture, 24.04., Kassel.
   
• Jochem, R.: Quality Governance based on Enterprise Engineering Method and Six Sigma Approach; 11th ICIT Conference, 10.-12.04., Hong Kong.
   
• Jochem, R, Giebel, M.: Certificate seminar "QM Basics" at the University College Ventspils from 18. 22.9.2006
   
• Jochem, R.: Enterprise Engineering Method supporting Six Sigma Approach, 11th World Congress on Total Quality Management, 4.-6.12.2006, Wellington, NZ

2002

• Jochem, R.: Common Representation through UEML - Requirements and Approach. In: Enterprise Inter- and Intra-Organizational Integration Building International Consensus, Kurt Kosanke, Roland Jochem, James G. Nell, Kluwer Publishers. Dordrecht. October 2002, ISBN 1-4020-7277-5
   
• Jochem, R.: Engineering Method to Build Process Lead Enterprises. In: Proceedings of 17th Annual Conference of Southern African Institute for Industrial Engineering. September 18-20, 2002. Stellenbosch, South Africa
   
• Jochem, R.: Enterprise Engineering. Proceedings of 3rd IFIP Working Conference on Infrastructures for Virtual Enterprises. May 1-3, 2002, Sesimbra, Portugal
   
• Jochem, R.: Common Representation through UEML - Requirements and Approach. ICEIMT 02 / IEMC 02, April 24-26, 2002, Valencia, Spain.
   
• Jochem, R.: Enterprise Engineering. 3rd IFIP Working Conference on Infrastructures for Virtual Enterprises. May 1-3, 2002, Sesimbra, Portugal.
   
• Jochem, R.: Engineering Method to Build Process Lead Enterprises. 17th Annual Conference of Southern African Institute for Industrial Engineering. September 18-20, 2002, Stellenbosch, South Africa.
   
• Jochem, R.: Common Representation through UEML. EI3-IC Workshop, February 20-22, 2002, Berlin, Germany
   
• Enterprise Inter- and Intra-Organizational IntegrationBuilding International Consensus
   
• Kurt Kosanke, Roland Jochem, James G. Nell; Kluwer Publishers. Dordrecht. October 2002, ISBN 1-4020-7277-5

2000

• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling: A Method for the Management of Change. Production Planning and Control, Taylor & Francis Publishers, Dec 2000, pp. 1-9.
   
• Mertins, K.; Rabe, M.; Jochem, R.: Enterprise and Factory Planning. Industrie Management 3/2000, GITO-Verlag, June 2000, pp. 51-55.
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling. In: Enterprise Modeling - Improving Global In-dustrial Competitiveness; Rolstadas, A.; Andersen, B.(eds.). Kluwer Academic Publishers, Boston, 2000; pp. 309-319.
   
• Mertins, K.; Jochem, R.: Architectures, Methods and Tools for Enterprise Engineering. In: Proceedings of Special ICPR 2000 "Facing the Challenges in the new Millennium, Nagarur, N., Tabucanon, M.: (eds.), Bangkok, 2000.
   
• Mertins, K.; Jochem, R.: Architectures, Methods and Tools for Enterprise Engineering. In: Proceedings of Pacific Conference on Manufacturing (PCM 2000), Taraman, K.S. (ed.), Detroit, 2000.
   
• Mertins, K.; Jochem, R.: Architectures, Methods and Tools for Enterprise Engineering. Special ICPR 2000 "Facing the Challenges in the new Millennium", Bangkok, August 2000.
   
• Mertins, K.; Jochem, R.: Architectures, Methods and Tools for Enterprise Engineering. Pacific Conference on Manufacturing (PCM 2000), Detroit, September 2000.

1999

• Mertins, K.; Jochem, R.: Quality Oriented Design of Business Processes. Kluwer Academic Publishers. Boston, 1999. ISBN 0-7923-8484-9
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling - A Method for the Management of Change. In: Proceedings of the International Enterprise Modeling Conference, IEMC '99. Verdal, Norway. 1999. Section B3.
   
• Mertins, K.; Jochem, R.: Business Process Modeling - Basis for Change Management. In: Proceedings of the International Conference on Industrial Engineering and Production Management, IEPM '99. Glasgow, Scotland . 1999. S. 265-275.
   
• Mertins, K.; Jochem, R.: Business Process Modeling - Ways and Methods for Agile Manufacturing. In: Proceedings of 15th International Conference on CAD/CAM Robotics & Factories of the Future, CARS&FOF '99. Aguas de Lindoia, Brazil. 1999. Section MW3-1.
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling - A Method to Support Knowlegde Management. In: Proceedings of International Knowledge Technology Forum. Potsdam, Germany. 1999. Section 5.
   
• Jochem, R.; Jäkel, F.-W.: Application of Integrated Enterprise Modeling for the Description and Use of Reference Models. In: Proceedings of International Knowledge Technology Forum. Potsdam, Germany. 1999. Section 1.
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling - A Method for the Management of Change. International Enterprise Modeling Conference, IEMC '99. Verdal, Norway. June 1999.
   
• Mertins, K.; Jochem, R.: Business Process Modeling - Basis for Change Management. International Conference on Industrial Engineering and Production Management, IEPM '99. Glasgow, Scotland. July 1999.
   
• Mertins, K.; Jochem, R.: Business Process Modeling - Ways and Methods for Agile Manufacturing. 15th International Conference on CAD/CAM Robotics & Factories of the Future, CARS&FOF '99. Aguas de Lindoia, Brazil. August 1999.
   
• Jochem, R.; Jäkel, F.-W.: Einsatz der Integrierten Unternehmensmodellierung für Beschreibung und Nutzung von Referenzmodellen. International Knowledge Technology Forum. Potsdam, Germany. September 1999.

1998

• Wenzel, K.; Tünschel, L.; Mertins, K.; Jäkel, F.-W.; Veränderungsmanagement im Statistischen Landesamt - Ausrichtung der Geschäftsprozesse auf Kunden- und Kostenverantwortung. ZwF 12/1998. Hanser Verlag. Munich. 1998.
   
• Tünschel, L.; Hille, T.; Jochem, R.: Geschäftsprozeßmodellierung - Werkzeug für das Management des Wandels. Io management, No. 5 ,1998, p.66 -74.
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling: Reference Architecture and Methodology. In: Handbook of Life Cycle Engineering: Concepts, Methods and Tools. Edited by Arturo Molina, José Manuel Sanchez, Andrew Kusiak, Chapman & Hall, August 1998. pp. 359-395.
   
• Tünschel, L.; Mertins, K.; Jochem, R.: Business Process Modeling - Ways and Methods for the Management of Change -. Proceedings of IX. Internationales Produktionstechnisches Kolloquium (Editor: E. Uhlmann), 29.+30.10.1998. p. 453 - 461. Berlin. 1998.
   
• Uhlmann, E.; Jochem, R.: Planning and optimization of manufacturing processes. Proceedings of the Entrepreneur Symposium '98 "Business Location Germany - Success Strategies for Your Company", May 7 and 8, 1998 in Zeuthen near Berlin. S. 79-87. Berlin. 1998.
   
• Mertins, K.; Jochem, R.: Geschäftsprozeßmanagement - Basis für erfolgreiche Veränderungsprozesse. Proceedings of the expert forum "Business Process Management"; 26.+27.11.1998, PSI AG, Berlin.
   
• Mertins, K.; Jochem, R.: The Tool MOOGO. In: Handbook on Architectures of Information Systems, edited by P. Bernus, K. Mertins, G. Schmidt. Springer-Verlag, June 1998.
   
• Mertins, K.; Jochem, R.: Geschäftsprozeßmanagement - Basis für erfolgreiche Veränderungsprozesse. Presentation at the expert forum "Business Process Management"; 26.+27.11.1998, PSI AG, Berlin
   
• Jochem, R.: Business Process Modeling - Ways and Methods for the Management of Change -. Presentation on the occasion of the IX International Colloquium on Production Technology, 29.+30.10.1998.
   
• Uhlmann, E.; Jochem, R.: Planning and optimization of manufacturing processes. Unternehmer-Symposium '98 "Wirtschaftsstandort Deutschland - Erfolgsstrategien für Ihr Unternehmen", 07.05. and 08.05.1998 in Zeuthen near Berlin.

1997

• Mertins, K.; Jochem, R.: Quality-oriented design of business processes. Beuth-Verlag. Berlin, Vienna, Zurich. 1997.
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling: Method and Tool; ACM SIG Group Bulletin. Volume 18, Number 3, Special Issue Enterprise Modeling. August 1997. page 63-66.
   
• Tünschel, L.; Jochem, R.; Jäkel, F.-W.: Organizational Handbook for Business Process Management. ZWF 92 (1997) 7-8. pp. 338-341. Carl Hanser Verlag, Munich.
   
• Borda, J.; Polo, A.; Jochem, R.; Doumeingts, G.: VIRSIM: a methodology supported by an integrated software for the re-engineering of the factories. In: Proceedings of CAPE97. Detroit, 3rd-5th of November 1997.
   
• Mertins, K.; Jochem, R.: INTEGRATED MODELING FOR QUALITY MANAGEMENT; Proceedings of 8th DAAAM INTERNATIONAL SYMPOSIUM, University of Zagreb, ICCU Dubrovnik, Croatia, October 22-25th, 1997
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling - Method and Tool. In: Handbook of Life Cycle En-gineering: Concepts, Methods and Tools, Edited by Arturo Molina, José Manuel Sanchez, Andrew Kusiak, Chapman & Hall, 1997.
   
• Mertins, K.; Jochem, R.; Jäkel, F.-W.; Doumeingts, G. (Ed.): Integrated business, process modeling, analysis and supporting tools. International Federation for Information Processing -IFIP-, Working Group 5.7
   
• Modeling techniques for business process, re-engineering and benchmarking London: Chapman and Hall, 1997, pp.35-45 Conference: International Workshop on Modelling Techniques for Business Process, Re-Engineering and Benchmarking, ISBN 0-412-78910-8
   
• Jochem, R.: Model-based business planning. Presentation at the expert forum "Geschäftsprozesse integriert gestalten". 20.11.97; PTZ Berlin.

1996

• Spur, G.; Mertins, K.; Jochem, R.: Integrated Enterprise Modeling. Beuth-Verlag. Berlin, Vienna, Zurich. 1996.
   
• Mertins, K.; Jochem, R.: Modellbasierte Unternehmensplanung - Methode und Werkzeug zur integrierten Modellerstellung. Industry Management 5/96. GI-TO-Verlag. 1996.
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling. In. Enterprise Modeling and Integration. F. B. Vernadat (Editor). Chapman & Hall. London. 1996.
   
• Mertins, K.; Jochem, R.; Jäkel, F.-W.: Integrated Business Process Modeling, Analysis and Supporting Tools. Proceedings of International Workshop on Modeling Techniques, Business Process Re-Engineering. Bordeaux, France. April. 1996.
   
• Jochem, R.: Integration in the QCIM project; in: J. Pirron: Success Factor Integration - Ways and Solutions for Information Management; Beuth Verlag, Berlin 1996.
   
• Jochem, R.: Zertifizierung und Optimierung der Auftragsabwicklung, presentation at the Hannover Messe 1996, The Quality Company.
   
• Jochem, R.: Contribution to the panel discussion on the occasion of the presentation of the working group "Quality-oriented enterprise modeling" (QUM) in the QCIM project; at the QCIM closing event, VDMA, Frankfurt (M.), 8.11.1996.

1995

• Mertins, K.; Schwermer, M.; Jochem, R.: Acceleration of value-adding processes. An example from the German machine tool industry. Journal for economic factory operation - ZwF 90 (1995) 3, pp. 110-112.
   
• Mertins, K.; Jochem, R.; Herrmann, J.; Gembrys, S.-N.: Model-based creation of a quality management manual. In: ZwF 90 (1995) 11. Carl Hanser Verlag. S. 540-543.
   
• Mertins, K.; Jochem, R.: Quality-oriented enterprise modeling. DIN-Mitteilungen -Zentralorgan der deutschen Normung- 74 (1995) July 7, 1995.
   
• Mertins, K.; Jochem, R.: Enterprise Modeling - Basis for Reengineering and Optimization of Business Processes. In: "Wirtschaftsinformatik '95". Competitiveness, Innovation, Profitability. Edited by König Physica-Verlag. Frankfurt/Main. 1995. (S.99-114).
   
• Mertins, K.; Jochem, R.: Business Process Reengineering: Basis for Successful Information System Planning. In: Winsor, J.; Sivakumar, A. I.; Gay, R. (Editors): Computer Integrated Manufacturing. World Scientific-Singapore, New Jersey, London, Hong Kong, 1995.
   
• Jochem, R.; Schwermer, M.: Method and Tool for Business process Modeling. In: Mertins, K.; Tanu, Z.; Chendramata, A. (eds.): Handbook of Indonesian-German Industrial Cooperation 1995 - A Handy Guide to be successful. Berlin: IPK Eigenverlag, 1995, pp.62-71.
   
• Mertins, K.; Edeler, H.; Jochem, R.; Hofmann, J.: Object-oriented modeling and analysis of business processes. In: Ladet, P.; Vernadat, F.B. (Eds.): Integrated Manufacturing Systems Engineering. London, et al: Chapman & Hall, Oct. 1995.
   
• Mertins, K.; Jochem, R.; Jäkel, F.-W.: Tool for Object-Oriented Modeling and Analysis of Business Processes. Proceedings of Joint final conference of ESPRIT Working Groups CIMMOD and CIMDEV. Co-operation in Manufacturing: CIM at Work. TUE - Eindhoven University of Technology. Eindhoven Netherlands. August 1995.
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling for Business Process Reengineering. In: Jansen, H.; Krause, F.-L. (Eds.): Life-Cycle Modeling for Innovative Products and Processes. Proceedings of PROLAMAT'95. November 29 - December 1, 1995. Ber-lin, Germany. Chapman & Hall Publishers. S. 589-600.
   
• Mertins, K.; Jochem, R.: Unternehmensmodelierung - Basis für Reengineering und Optimie-rung von Geschäftsprozessen. Paper presented at the conference "Wirtschaftsinformatik '95". Frankfurt/Main 15-17.02.1995
   
• Mertins, K.; Jochem, R.; Jäkel, F.-W.: Tool for Object-Oriented Modeling and Analysis of Business Processes. Joint final conference of ESPRIT Working Groups CIMMOD and CIMDEV. Co-operation in Manufacturing: CIM at Work. TUE - Eindhoven University of Technology. Eindhoven Netherlands. 28.-30.08.1995
   
• Mertins, K.; Jochem, R.: Business Process Reengineering: Basis for Successful Information System Planning. International Conference on Computer Integrated Manufacturing. 17. 06.1995, Singapore
   
• Mertins, K.; Jochem, R.: Integrated Enterprise Modeling for Business Process Reengineering. International Conference on: Life-Cycle Modeling for Innovative Products and Processes. 1.12.1995, Berlin, PTZ
   
• Jochem, R.; Schwermer,M.: Qualitätsmanagement - Handbuch auf der Basis von Geschäftsprozeßmodellen. CIM TT - Seminar. 09.06.1995 Berlin, PTZ

1994

• Mertins, K.; Süssenguth, W.; Jochem, R.: Modeling methods for computer-integrated production processes. Enterprise modeling. Software design. Interface definition. Simulation. Edited by G. Spur. Munich, Vienna: Carl Hanser Verlag, 1994.
   
• Mertins, K.; Jochem, R.; Jäkel, F.-W.: Reengineering and optimization of business processes. ZwF 89 (1994) 10, pp. 479 - 481.
   
• Mertins, K.; Jochem, R.: CIM-Mapper - A method for supporting integration projects. In: Mechanika, Gliwice 1994. International Conference on Computer Integrated Manufacturing Systems. Zakopane. May 10-13, 1994. pp. 89-107.
• Mertins, K.; Edeler, H.; Jochem, R.: Integrated Enterprise Modelling - First Step Towards an Enterprise-Wide Optimization of Business Processes. In: Proceedings of IFAC / IFORS - Workshop on Intelligent Manufacturing Systems. Kopacek, P. (Editor). Vienna. June 13-15, 1994, pp. 199-204.
   
• Mertins, K.; Rabe, M.; Jochem, R.: Factory Planning Using Integrated Information and Material Flow Simulation. In: Proceedings of the European Simulation Sympo-sium ESS'94, October 9-12, 1994, Vol. II, pp . 92-96.
   
• Mertins, K.; Jochem, R.: Integrated Factory Modeling. In: Handbook of Production Engineering. Volume 6: Factory operation. Spur, G.; Stöferle, T. (Eds.). Munich: Carl Hanser Verlag, 1994. pp. 131-144.
   
• Jochem, R.; Schwermer, M.: Integrated Enterprise Modelling - Basis for Business Process Re-engineering and Optimization. In: Proceedings for the Dedicated Conference on Lean / Agile Manufacturing in the Automotive Industries. Aachen: 1994. p. 495-502.
   
• Edeler, H.; Jochem, R.; Sauer, O.: The pilot project of Steilmann-Cottbus GmbH. In: Lean production in the ready-to-wear industry. Hartmann, W.-D.; Steilmann, C.; Töpper, S. (Eds.). Berlin: Dr. Wilke GmbH, 1994. pp. 65-132.
   
• Mertins, K.; Edeler, H.; Jochem, R.; Hofmann, J.: Object-oriented modeling and analysis of business processes. In Conference Proceedings: Ladet, P.; Vernadat, F.B. (Eds.): Integrated Manufacturing Systems Engineering. London, et al: Chapman & Hall, December 1994.
   
• Jochem, R.; Schallock, B.: Participative design of overall company structures with Pa-deS and IUM. In: Designing team-oriented production (conference proceedings). Mertins, K. (ed.). Berlin: 1994, Block III, pp. 1-14.
   
• Jochem, R.; Schallock, B.: Partizipative Gestaltung gesamtbetrieblicher Strukturen mit PadeS und IUM. In: Designing team-oriented production (conference proceedings). Mertins, K. (ed.). Berlin: 1994. block III, pp. 1-14. March 9, 1994. Berlin, PTZ.
   
• Mertins, K.; Jochem, R.: CIM-Mapper - Eine Methode der Unterstützung von Integrations-projekten. Mechanika, Gliwice 1994 International Conference on Computer Integrated Manufacturing Systems. May 10-13, 1994, Zakopane.
   
• Mertins, K.; Edeler, H.; Jochem, R.: Integrated Enterprise Modelling -Enterprise- Wide Optimization of Business Processes. IFAC/IFIP/IFORS - Conference on Intelli-gent Manufacturing Systems (IMS `94). June 1994 Vienna, Austria
   
• Jochem, R.; Schwermer, M.: Integrated Enterprise Modelling - Basis for Business Process Re-engineering and Optimization. Proceedings for the Dedicated Conference on Lean / Agile Manufacturing in the Automotive Industries. 27th ISATA. 31.10.-04.11.94, Aachen.
   
• Mertins, K.; Edeler, H.; Jochem, R.; Hofmann, J.: Object-oriented Modeling and Analysis of Business Processes. IMSE'94. 12-14.12.1994 Grenoble, F.

1993

• Spur, G.; Mertins, K.; Jochem, R.: Integrated Enterprise Modeling. Berlin, Vienna, Zurich: Beuth Verlag, GmbH .1993.
   
• Mertins, K.; Jochem, R.: Enterprise Modeling: Basis for Information System Planning. In: IFIP Transaction. JSPE-IFIP WG 5.3 "The Design of Information Infrastructure System for Manufacturing". Amsterdam [et al]: El-sevier Science Publishers, 1993.
   
• Mertins, K.; Süssenguth, W.; Jochem, R.: Planning of Enterprise-Related CIM Structures. In: Advances in Factories of the Future, CIM and Robotics. Manufacturing Research and Technology. Amsterdam [et al]: Elsevier Science Publishers, 1993. pp. 67-76.
   
• Mertins, K.; Jochem, R.: Enterprise Integration by Modelling - Basis for Planning and Optimization of Enterprise Processes. In: Proceedings of the International Conference on Industrial Engineering and Production Management (IEPM '93 - FUCAM). Mons, Belgium. 1993.
   
• Mertins, K.; Jochem, R.: Enterprise Modeling - Basis for Corporate Planning. In: Conference proceedings "CIM-Ergebnisse aus Forschung und Praxis", 31.3.-1.4.1993, Stuttgart.
   
• Mertins, K.; Jochem, R.: Enterprise Integration by Modelling - Basis for Planning and Optimization of Enterprise Processes. International Conference on Industrial Engineering and Production Management (IEPM '93 - FUCAM) 3. 06.1993, Mons, Belgium.
   
• Mertins, K.; Jochem, R.: Enterprise Modeling - Basis for Enterprise Planning. In: Conference proceedings "CIM results from research and practice". 31.3.93, Stuttgart.

1992

• Mertins, K.; Süssenguth, W.; Jochem, R.: An Object Oriented Method for Integrated Enterprise Modeling as a Basis for Enterprise Coordination. In: Enterprise Integration Modeling. Proceedings of the First International Conference. Charles J. Petrie (ed.). MIT Press, Massachusetts Institute of Technology - Cambridge, Massachusetts 1992, pp. 249-258.
   
• Mertins, K.; Süssenguth, W.; Jochem, R.: Report on the project: Scientific foundations and input for CIM interface standardization. Subproject: Integrated Enterprise Modeling (IUM); funding period 1991. Berlin, IPK, March 1992.
   
• Mertins, K.; Süssenguth, W.; Jochem, R.: Planning of Enterprise-Related CIM-Structures. In: Proceedings of 8th International Conference CARS and FOF. Metz, France. 17-19.08.1992. Conference Proceedings. editors: J.-M. Proth; F. Vernadat. Amsterdam [and others]: Elsevier Science Publishers.
   
• Jochem, R.; Süssenguth, W.: Requirements for databases from the perspective of CIM sub-areas. (Chapter 5: Sections 5.1, 5.5). In: Databases for CIM / Ed. by G. Spur. Berlin [et al:] Springer-Verl. u. Verl. TÜV Rheinland, 1992. pp. 40-43 and 78-81.
   
• Jochem, R.; Mertins, K.; Süssenguth, W.: Datenorganisationen im Unternehmen (Chapter 2). Importance of databases for CIM (Chapter 3). In: Databases for CIM / Ed. by G. Spur. Berlin [et al:] Springer-Verl. u. Verl. TÜV Rheinland, 1992. p. 4-19.
   
• Mertins, K.; Süssenguth, W.; Jochem, R.: An Object Oriented Method for Integrated Enterprise Modeling as a Basis for Enterprise Coordination. International Conference on Enterprise Integration Modeling Technology (ICEIMT), Workshop V: Enterprise Coordination Models. US Air Force - Integration Technology Division. June 1992, Hilton Head, South Carolina.
   
• Mertins, K.; Süssenguth, W.; Jochem, R.: Planning of Enterprise-Related CIM-Structures. Proceedings of 8th International Conference CARS and FOF.17.-19.08.1992, Metz, F.

1991

• Mertins, K.; Süssenguth, W.; Jochem, R.: Report on the project: Scientific basis and preparation for CIM interface standardization. Sub-project: Integrated Enterprise Modeling (IUM); funding period 1990. Berlin, IPK, March 1991
   
• Mertins, K.; Süssenguth, W.; Jochem, R.: Integrated Information Modeling for CIM: An Object-Oriented Method for Integrated Enterprise Modeling. In; Computer Applications in Production and Engineering: Integration Aspects. Proceedings of the 4th International IFIP TC5 Conference on computer Applications in Production and Engineering: Integration Aspects: CAPE'91. Doumeingts, G. Browne, J.; Tomljanovich, M. (Editors). Elsevier Science Publishers B. V. (Noth-Holland). Bordeaux, France, Sept. 10-12, 1991, pp. 315-323.

1989

• Gallasch, W.; Gimpel, B.; Jochem, R.; Mertins, K.; Seliger, G.; Süssenguth, W.; Venitz, U.: Schnittstellen der rechnerintegrierten Produktion (CIM) - Fertigungssteuerung und Auftragsabwicklung. Progress report. State of the art - goals in research, development and standardization. Berlin: Beuth, (Din-Fachberichte; 21), pp. 153-260.
   
• Jochem, R.; Rabe, M.; Süssenguth, W.; Bals, P.: An Object-Oriented Analysis and Design Methodology for CIM-Systems. In: Preceedings of TOOLS '89, 13-15.11.1989: Technology of Object-Oriented Languages and Systems. S. 75-84.

• 2009
• 2008
• 2007
• 2006
• 2002
• 2000
• 1999
• 1998
• 1997
• 1996
• 1995
• 1994
• 1993
• 1992
• 1991
• 1989