Publications
2024
| Knoll, J., Heim, H.-P., 2024. Analysis of the Similarity between Injection Molding Simulation and Experiment. Polymers 16, 1265. https://doi.org/10.3390/polym16091265 |
| Schlink, A., Wiegel, K., Eckel, E., Hartung, M., Ayeb, M., Heim, H.-P., 2024. Characterization of local electrical properties of carbon fiber reinforced thermoplastic composites using a potential field method in terms of fiber orientation influenced by injection molding, 39th International Conference of the Polymer Processing Society, Kolumbien, Cartagena, 19.5.-23.5.2024. |
| Hofmann, T., Giesen, R.-U., Heim, H.-P., 2024. High Consistency Silicone Rubber Foams. Polymers 16, 1181. https://doi.org/https://doi.org/10.3390/polym16091181 |
| Falkenreck, C.K., Zarges, J.-C., Heim, H.-P., 2024. Degradation of regenerated cellulose fiber-reinforced bio polyamide under accelerated aging conditions, Hof University of Applied Sciences, Bioplastics 2024, March 20-21, Hof, Germany. |
| Falkenreck, C.K., Zarges, J.-C., Heim, H.-P., 2024. Impact of accelerated aging on injection molded regenerated cellulose fiber-reinforced bio polyamides, SPE ANTEC, March 4-7, St. Louis, USA. |
| Güzel, K., Zarges, J.-C., Heim, H.-P., 2024. Quantitative analysis of the effect of foam morphology on the quasi-static and cyclic-dynamic tensile properties. International Journal of Fatigue 183, 108236. https://doi.org/10.1016/j.ijfatigue.2024.108236 |
| Güzel, K., Zarges, J.-C., Heim, H.-P., 2024. Pressure Dynamics in Foam Injection Molding: Unraveling the Impact on Expansion Ratio and Cell Morphology, 39th International Conference of the Polymer Processing Society, Kolumbien, Cartagena, 19.5.-23.5.2024. |
| Rehmer, A., Klute, M., Heim, H.-P., Kroll, A., 2024. Chapter 4 - A Digital Twin for part quality prediction and control in plastic injection molding. Academic Press, Cambridge, Massachusetts. https://doi.org/https://doi.org/10.1016/B978-0-32-395207-1.00014-7 |
| Reit, M., Heim, H.-P., Zarges, J.-C., 2024. Correlation between the activation energy of PLA respectively PLA/starch composites and mechanical properties with regard to differ accelerated aging conditions. Biopolymers 115, e23571. https://doi.org/10.1002/bip.23571 |
| Krug, N., Zarges, J.-C., Heim, H.-P., 2024. Influence of ethylene oxide and gamma irradiation sterilization processes on the degradation behaviour of poly(lactic acid) (PLA) in the course of artificially accelerated aging. Polymer Testing 132, 108362. https://doi.org/https://doi.org/10.1016/j.polymertesting.2024.108362 |
| Güzel, K., Zarges, J.-C., Heim, H.-P., 2024. Foam Morphology, Unveiling Tensile Dynamics, Fachtagung Schäumen, Lüdenscheid, Germany, 4.-6. Juni 2024. |
| Hofmann, T., Giesen, R.-U., Heim, H.-P., 2024. Influence of recyclate on the mechanical properties of high consistency silicone rubber, German Rubber Conference 2024, July 1-4, Nuremberg, Germany. German Rubber Conference DKT 2024. |
| Hofmann, T., Giesen, R.-U., Heim, H.-P., 2024. Influence of the crosslinking speed and crosslinking type on the foam properties of water-based high consistency silicone rubber foam, SPE Foams 2024, 19-20 September, King of Prussia, PA. |
| Oikonomou, D., Heim, H.-P., 2024. Simulation of Mechanical Properties of Injection‐Molded Thermoplastic Foam Structures. Advanced Engineering Materials 26, 2400634 . https://doi.org/10.1002/adem.202400634 |
| Hofmann, T., Giesen, R.-U., Heim, H.-P., 2024. Influence of the silica content of foamed high consistency silicone rubber on the mechanical and physical properties with a water based blowing agent, DGM 8th CellMAT, 27-29. November, Magdeburg, Germany. |
| Giesen, R.-U., Japins, G., Heim, H.-P., 2024. Development of a direct injection moulding process for TPE for the manufacture of disposable medical devices, DKT 2024, Nuremberg, Germany, 02.07.2024. |
| Giesen, R.-U., Nikousaleh, M.A., Hartung, M., Heim, H.-P., 2024. Einfluss von Nachbehandlungsprozessen und Alterung auf Silikon-Thermoplast-Verbunde, Engelskirchener Kunststoff-Technologie-Tage, Lindlar, 21.06.2024. |
| Knoll, J., Heim, H.-P., 2024. Analysis of the Machine-Specific Behavior of Injection Molding Machines. Polymers 16(1), 54. https://doi.org/https://doi.org/10.3390/polym16010054 |
| Giesen, R.-U., Klier, K., Heim, H.-P., 2024. 3D printing of liquid silicone rubber - Influence of process parameters on the mechanical and optical properties of the part, SPE ANTEC, March 4-7, St. Louis, USA. |
| Giesen, R.-U., Nikousaleh, M.A., Heim, H.-P., 2024. Investigating the post-aging adhesive properties in multi component injection molded made of liquid silicone rubber (LSR) and acrylonitrile-butadiene-styrene (ABS) for medical device applications, 39th International Conference of the Polymer Processing Society, Kolumbien, Cartagena, 19.5.-23.5.2024. |
| Goetjes, V., Zarges, J.-C., Heim, H.-P., 2024. Characterization of the degradation processes of PLA starch composites in hygrothermal environment, SPE ANTEC, March 4-7, St. Louis, USA. |
| Goetjes, V., Zarges, J.-C., Heim, H.-P., 2024. Characterization of the degradation processes of PLA starch composites in hygrothermal environment, 75th Starch Convention, April 9th, Detmold, Germany. |
| Goetjes, V., Zarges, J.-C., Heim, H.-P., 2024. Beständige Biokunststoffe und Bioverbundwerkstoffe für Langzeitanwendungen – Der Forschungsverbund BeBio2, 25. Fachtagung „Fortschritte in der Kunststofftechnik, 13.06.24, Osnabrück, Germany. |
| Hartung, M., Heim, H.-P., 2024. UVC Irradiation as a Surface Treatment of Polycarbonate to Generate Adhesion to Liquid Silicone Rubber in an Overmolding Process. Polymers 16, 1141. https://doi.org/10.3390/polym16081141 |
| Goetjes, V., Zarges, J.-C., Heim, H.-P., 2024. Differentiation between Hydrolytic and Thermo-Oxidative Degradation of Poly(lactic acid) and Poly(lactic acid)/Starch Composites in Warm and Humid Environments. Materials 17, 3683. https://doi.org/10.3390/ma17153683 |
| Hofmann, T., Giesen, R.-U., Heim, H.-P., 2024. Influence of the shore hardness of the base rubber on the mechanical and physical properties of high consistency silicone rubber foamed with water, Poster, German Rubber Conference 2024, July 1-4, Nuremberg, Germany. |
| Marl, S., Ni, X., Hornig, T.A., Spieker, C., Giesen, R.-U., Heim, H.-P., Fister, M., 2024. Correlations between the Aging Behavior and Finite Element Method Simulation of Three Silicone Elastomers. Materials 17, 3961. https://doi.org/10.3390/ma17163961 |
| Marl, S., Klier, K., Rüppel, A., Giesen, R.-U., Heim, H.-P., 2024. Determination of the cross-linking system of high consistency silicone elastomers using TGA and FTIR, International Symposium of Silicon Chemistry, May 12-17, Hiroshima, Japan. |
| Hofmann, T., Giesen, R.-U., Heim, H.-P., 2024. Influence of the crosslinking speed and crosslinking type on the foam properties of water-based high consistency silicone rubber foam. Foams 2024. https://doi.org/10.17170/kobra-2024102911029 |
| Marl, S., Giesen, R.-U., Heim, H.-P., 2024. Influence of various Additives in the Thermoplastic on the Adhesion of LSR-Thermoplastic Composites. Kautschuk, Gummi, Kunststoffe 77, 56–61. |
| Von Boyneburgk, C., Oikonomou, D., Seim, W., Heim, H.-P., 2024. Mechanical Analysis and Simulation of Wood Textile Composites. Journal of Composites Science 8, 190. https://doi.org/10.3390/jcs8050190 |
| Knoll, J., Heim, H.-P., 2024. Method for Evaluating Process Stability in Injection Molding Using High-Resolution Process Data and Dynamic Time Warping Correspondences, SPE ANTEC, March 4-7, St. Louis, USA. |
2023
| Krug, N., Zarges, J.-C., Heim, H.-P., 2023. Influence of Ethylene Oxide and Gamma Irradiation Sterilization Processes on the Properties of Poly-L-Lactic-Acid (PLLA) Materials. Polymers 15, 3461. https://doi.org/https://doi.org/10.3390/polym15163461 |
| Klier, K., Giesen, R.-U., Heim, H.-P., 2023. Liquid Additive Manufacturing – Investigation of the influence of additives and process parameters on mechanical and optical properties of liquid silicone rubber, 38th International Conference of the Polymer Processing Society, St. Gallen, Switzerland, May 22-26. |
| Zarges, J.-C., Schlink, A., Lins, F., Essinger, J., Sommer, S., Heim, H.-P., 2023. Influence of Different Hot Runner-Systems in the Injection Molding Process on the Structural and Mechanical Properties of Regenerated Cellulose Fiber Reinforced Polypropylene. Polymers 15, 1924. https://doi.org/10.3390/polym15081924 |
| Heim, H.-P., Lins, F., Kahl, C., Zarges, J.-C., 2023. Modification of Polyamide 66 for a Media-Tight Hybrid Composite with Aluminum. Polymers 15, 1800. https://doi.org/10.3390/polym15071800 |
| Falkenreck, C.K., Gemmeke, N., Zarges, J.-C., Heim, H.-P., 2023. Influence of Accelerated Aging on the Fiber–Matrix Adhesion of Regenerated Cellulose Fiber-Reinforced Bio-Polyamide, Special Issue: Advances in Cellulose-Based Polymers and Composites. Polymers 15, 1606. https://doi.org/ https://doi.org/10.3390/polym15071606 |
| Wolff, S., Rüppel, A., Rida, H.A., Heim, H.-P., 2023. Emission and Mechanical Properties of Glass and Cellulose Fiber Reinforced Bio-Polyamide Composites. Polymers 15, 2603. https://doi.org/10.3390/polym15122603 |
| Hofmann, T., Giesen, R.-U., Heim, H.-P., 2023. Influence of the blowing agent type on the foam properties of high consistency silicone rubber, 38th International Conference of the Polymer Processing Society, St. Gallen, Switzerland, May 22-26. |
| Koch, M., Heim, H.-P., 2023. CuInS2-quantum dot filled films for the use in luminescent solar concentrators, 38th International Conference of the Polymer Processing Society, St. Gallen, Switzerland, May 22-26. |
| Passinger, T., Zarges, J.-C., Heim, H.-P., 2023. Fogging behaviour of selected biopolymers, 38th International Conference of the Polymer Processing Society, St. Gallen, Switzerland, May 22-26. |
| Goetjes, V., Gemmeke, N., Zarges, J.-C., Heim, H.-P., 2023. Resistance of PLA starch blendsto weathering effects, 38th International Conference of the Polymer Processing Society, St. Gallen, Switzerland, May 22-26. |
| Güzel, K., Zarges, J.-C., Heim, H.-P., 2023. In-situ full-field deformation analysis of injection-molded microcellular polycarbonate according to foam morphology patterns. Polymer Testing 124, 108102. https://doi.org/https://doi.org/10.1016/j.polymertesting.2023.108102 |
| Von Boyneburgk, C., Zarges, J.-C., Kuhl, D., Heim, H.-P., 2023. Mechanical Characterization and Simulation of Wood Textile Composites (WTC) supported by Digital Image Correlation (DIC). Composites Part C: Open Access Volume 11, 100370. https://doi.org/https://doi.org/10.1016/j.jcomc.2023.100370 |
| Johannes, C., Lins, F., Meyer, M.S., Hartung, M., Heim, H.-P., 2023. The Influence of Thermal and Mechanical Stress on the Electrical Conductivity of ITO-Coated Polycarbonate Films. Polymers 15, 2543. https://doi.org/10.3390/polym15112543 |
| Oikonomou, D., Heim, H.-P., 2023. Analysis and Validation of Varied Simulation Parameters in the Context of Thermoplastic Foams and Special Injection Molding Processes, Special Issue: Research on Polymer Simulation, Modeling and Computation. Polymers 15, 2119. https://doi.org/ https://doi.org/10.3390/polym15092119 |
| Johannes, C., Macher, S., Niklaus, L., Schott, M., Hillmer, H., Hartung, M., Heim, H.-P., 2023. Flexible Electrochromic Device on Polycarbonate Substrate with PEDOT:PSS and Color-Neutral TiO2 as Ion Storage Layer. Polymers 15, 1982. https://doi.org/ https://doi.org/10.3390/polym15091982 |
| Knoll, J., Reit, M., Heim, H.-P., 2023. Parameter recommendation for injection molding based on similarity analysis of injection molded parts. Journal of Manufacturing Processes 95, 171–182. https://doi.org/https://doi.org/10.1016/j.jmapro.2023.03.072 |
| Knoll, J., Heim, H.-P., 2023. Evaluation of the injection molding process behavior during start-up and after parameter changes using dynamic time warping correspondences. Journal of Manufacturing Processes 95, 183–203. https://doi.org/https://doi.org/10.1016/j.jmapro.2023.03.076 |
| Johannes, C., Hartung, M., Heim, H.-P., 2023. Back Injection Molding of Electrochromic Multilayer Films on Polycarbonate Substrates, MRS Spring Meeting, April 12, San Francisco, USA. |
| Nikousaleh, M.A., Giesen, R.-U., Hartung, M., Heim, H.-P., 2023. Multicomponent injection molding with LSR and ABS for medical device applications, SPE ANTEC, March 27-30, Denver, USA. |
| Klute, M., Heim, H.-P., 2023. Digital Twin of Injection Molding: Controlling quality properties of recycled plastics by using self re-training machine learning algorithms, SPE ANTEC, March 27-30, Denver, USA. |
| Bogedale, L., Schrodt, A., Heim, H.-P., 2023. Time Series Data for Process Monitoring in Injection Molding: A quantitative study of the benefits of a high sample rate. International Polymer Processing 38, 167–174. https://doi.org/https://doi.org/10.1515/ipp-2022-4258 |
| Bogedale, L., Doerfel, S., Schrodt, A., Heim, H.-P., 2023. Online Prediction of Molded Part Quality in the Injection Molding Process Using High-Resolution Time Series, Special Issue: Frontiers in Injection Molding of Polymers. Polymers 15(4), 978. https://doi.org/https://doi.org/10.3390/polym15040978 |
| Johannes, C., Hartung, M., Heim, H.-P., 2023. Weathering of a Polyurethane-Based Gel Electrolyte, Special Issue: Advances in Polymer-Based Electrochromic Devices. Polymers 15(6), 1448. https://doi.org/https://doi.org/10.3390/polym15061448 |
| Schleiting, M., Klier, K., Wiemer, N., Wetzel, A., Zarges, J.-C., Heim, H.-P., Middendorf, B., 2023. Fibre pullout behaviour of fibre-reinforced UHPC with TPE-coated fibres. Construction and Building Materials 376, 131043. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2023.131043 |
| Reit, M., Zarges, J.-C., Heim, H.-P., 2023. Influence of Accelerated Aging on the Activation Energy of PLA and PLA-Starch Composites, European Congress on Biopolymers and Bioplastics, 16. November 2023, Rome, Italy. |
| Klute, M., Heim, H.-P., 2023. Ein digitaler Zwilling des Spritzgießprozesses ermöglicht die störungsfreie Rezyklatverarbeitung. Kunststoffe 56–59. |
| Falkenreck, C.K., Zarges, J.-C., Heim, H.-P., 2023. Influence of Accelerated Aging on Regenerated Cellulose Fiber-Reinforced Bio-Polyamide, European Congress on Biopolymers and Bioplastics, 16. November 2023, Rome, Italy. |
| Falkenreck, C.K., Zarges, J.-C., Heim, H.-P., 2023. Beschleunigte Alterung von naturfaserverstärkten Bio-Polyamiden, DGM-Tagung Fachausschuss Polymerwerkstoffe, 24 November 2023, Kassel, Germany. |
| Goetjes, V., Zarges, J.-C., Heim, H.-P., 2023. Hydrothermale Alterung von PLA-Stärke-Kompositen, DGM-Tagung Fachausschuss Polymerwerkstoffe , 24 November 2023, Kassel, Germany. |
| Goetjes, V., Falkenreck, C.K., Pfanzer, S., Heim, H.-P., 2023. How durable are Biopolymers?. Plastics Insights = Kunststoffe International 10/2023, 90–92. https://doi.org/ https://en.kunststoffe.de/a/specialistarticle/how-durable-are-biopolymers-5164381 |
| Nikousaleh, M.A., Riemann, N., Hartung, M., Giesen, R.-U., Heim, H.-P., 2023. MK-Spritzguss mit Flüssigsilikonkautschuk(LSR) und Acrylnitril-Butadien-Styrol (ABS) für die Medizintechnik. Kautschuk, Gummi, Kunststoffe 5, 2–6. |
| Nikousaleh, M.A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2023. Silikon-Thermoplastverbunde 2-Komponeten Spritzgießen,Kasseler Silikonkautschuktagung, 27-28 september 2023, Kassel, Germany. |
| Marl, S., Giesen, R.-U., Heim, H.-P., 2023. Storage and Media Resistance of Liquid Silicone Rubber: A Comparative Study of Different Test Conditions, Silicone Expo Detroit, October 4-5 2023, Detroit. |
| Ni, X., Fister, M., Spieker, C., Marl, S., Heim, H.-P., 2023. Messung des Kompressionsmoduls von Silikon-Werkstoffen mittels eines entwickelten volumetrischen Kompressionsversuchs Kautschuk Gummi Kunststoffe 76, 39–43. |
| Japins, G., Giesen, R.-U., Heim, H.-P., Pape, J., 2023. Direct Injection Molding Competitiveness Study. Kautschuk Gummi Kunststoffe 6/2023, 29–33. |
| Falkenreck, C.K., Korthals, H., Goetjes, V., Heim, H.-P., 2023. Textile Waste Becomes Plastic Composites. Plastics Insights = Kunststoffe International 113, 62–65. |
| Goetjes, V., Falkenreck, C.K., Pfanzer, S., Heim, H.-P., 2023. Wie beständig sind Biopolymere? Kunststoffe 10/2023, 128–131. |
| Hofmann, T., Giesen, R.-U., Heim, H.-P., 2023. Influence of the crosslinking system on the mechanical and physical properties of high consistency silicone rubber foamed with water, Silicone Elastomers World Summit, November 28-29, Amsterdam, The Netherlands. |
| Hofmann, T., Dörner, M., Chalgham, K.W.A., Giesen, R.-U., Heim, H.-P., 2023. Innovative Simulationsmethode zur Abbildung von Vernetzungsreaktionen bei der Extrusion von Silikonkautschuk. Kautschuk-Gummi-Kunststoffe 11/2023, 1–6. |
| Klute, M., Heim, H.-P., 2023. Adhesive bonding properties of TPU in additive manufacturing compared to two-component injection molding, Thermoplastic Elastomer World Summit, November 28-29, Amsterdam, The Netherlands. |
| Klute, M., Heim, H.-P., 2023. Mehr Rezyklat dank digitalem Zwilling. Kunststoffe 11/2023, 56–59. |
| Falkenreck, C.K., Korthals, H., Goetjes, V., Heim, H.-P., 2023. Aus Textilabfällen werden Kunststoffverbunde. Kunststoffe 2023, 64–67. |
| Marl, S., Hartung, M., Klier, K., Rüppel, A., Giesen, R.-U., Heim, H.-P., 2023. Improvement of the Cell Structure of Water‐Foamed Liquid Silicone Rubber. Advanced Engineering Materials 101, TBD. https://doi.org/10.1002/adem.202201898 |
| Elsesser, T., Ries, A., Heim, H.-P., 2023. Characterization of Woven Elctromagnetic Shielding Thermoplastic-Fiber Composites compared to Non- Woven Electromagnetic Shielding Concepts, Baltic Polymer Symposium, Jelgava, 21 September 2023. |
| Güzel, K., Zarges, J.-C., Heim, H.-P., 2023. Effects of the Cellular Morphology on Fatigue Deformation Mechanisms of Physically Foamed Polycarbonate, SPE Foams, Taipei, Taiwan, October 17-20, 2023. |
| Wiegel, K., Schlink, A., Eckel, E., Ayeb, M., Brabetz, L., Hartung, M., Heim, H.-P., 2023. Algorithm for fast evaluation of in-plane fiber orientation in reinforced plastics using light microscopy images. Communications Materials 4(1), 74. https://doi.org/doi.org/10.1038/s43246-023-00403-1 |
| Nikousaleh, M.A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2023. MC-Injection Molding with Liquid Silicone Rubber (LSR) and Acrylonitrile Butadiene Styrene (ABS) for Medical Technology. Polymers 15(19), 3972. https://doi.org/https://doi.org/10.3390/polym15193972 |
| Japins, G., Giesen, R.-U., Heim, H.-P., 2023. Direkt Injection Molding with Optimized Screws and Analytics for Assessing the Mixing Quality, Baltic Polymer Symposium, Jelgava, 21 September 2023. |
| Goetjes, V., Zarges, J.-C., Heim, H.-P., 2023. Resistance of poly(lactic acid)/starch composites to weathering effects. Journal of Applied Polymer Science TBD. https://doi.org/ https://doi.org/10.1002/app.54768 |
| Goetjes, V., von Boyneburgk, C., Heim, H.-P., Horn, M.M., 2023. Influence of Chitosan and Grape Seed Extract on Thermal and Mechanical Properties of PLA Blends, Special Issue: Environmentally Friendly Bio-Based Polymeric Materials. Polymers 15, 1570. https://doi.org/https://doi.org/10.3390/polym15061570 |
| Von Boyneburgk, C., Goetjes, V., Horn, M.M., 2023. Sustainable plastic alternatives- PLA blends with materials from unused biomess. Center for interdisciplinary Nanostructure Science and Technology (CINSaT) 14, 5–7. |
2022
| Güzel, K., Zarges, J.-C., Heim, H.-P., 2022. In-situ Visualization of the Influence of Morphological Properties on the Mechanical Deformation Behavior of Physically Foamed Polycarbonate, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan. |
| Heim, H.-P., Jakob, F., Pollmeier, J., 2022. Influences on the mechanical properties of SRCs in a combined compacting and back injecting process. International Polymer Processing 37, 141–151. https://doi.org/https://doi.org/10.1515/ipp-2021-4151 |
| Land, P., Krumpholz, T., Heim, H.-P., 2022. Comparison of fibre reorientation of short-and long-fibre reinforced polypropylene by injection molding with a rotating mold core. International Polymer Processing NN. https://doi.org/https://doi.org/10.1515/ipp-2022-4252 |
| Hartung, M., 2022. Polyketonesas a new hard component in thermoplastic/LSR composites, Silicone Elastomers World Summit, 1st December 2022, Düsseldorf, Germany. |
| Nikousaleh, M., 2022. Experimental and Simulative Investigation of 2C Injection Molding of Thermoplastics with low Heat Deflection Temperature and LSR Using Dynamic Temperature Control, 2nd International Symposium on Plastics Technology, 5-6 September 2022, Achen, Germany. |
| Rüppel, A., Wolff, S., Heim, H.-P., 2022. The impact of accelerated aging on the mechanical and thermal properties and VOC emission of polypropylene composites reinforced with glass fibers. International Polymer Processing NN. https://doi.org/10.1515/ipp-2022-4268 |
| Hartung, M., Nikousaleh, M.A., Riemann, N., Giesen, R.-U., Heim, H.-P., 2022. Hart-Weichverbunde aus Silikonelastomer und Thermoplast für die Medizintechnik, DGM Fachausschuss Polymerwerkstoffe, Kaiserslautern. |
| Rüppel, A., Wolff, S., Oldemeier, J.P., Schöppner, V., Heim, H.-P., 2022. Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution. Polymers 2022, 3113. https://doi.org/https:// doi.org/10.3390/polym14153113 |
| Marl, S., Klier, K., Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2022. Improvement of the cell structure of water foamed LSR, 7th International Conference on Cellular Materials DGM 7th CellMAT 2022, 12-14 Oktober, Dresden, Germany. |
| Oikonomou, D., Heim, H.-P., 2022. Simulation and verification of mechanical properties of injection molded thermoplastic foam structures, 7th CellMAT, Dresden, Germany. |
| Güzel, K., Zarges, J.-C., Heim, H.-P., 2022. Determination of In-situ Experimental Mechanical Properties of Injection Molded Thermoplastic Foam Structures,DGM 7th CellMAT, Dresden, Germany. |
| Klute, M., Piontek, A., Heim, H.-P., Kabasci, S., 2022. Effects of blending poly(lactic acid) and thermoplastic polyester polyurethanes on the mechanical and adhesive properties in two-component injection molding. International Polymer Processing 2022, TBD. https://doi.org/https://doi.org/10.1515/ipp-2021-4212 |
| Kahl, C., Zarges, J.-C., Heim, H.-P., 2022. Influence of fiber volume in hybrid short glass/cellulose reinforced thermoplastic compounds. Polymers 2022, 3929. https://doi.org/https://doi.org/10.3390/polym14193929 |
| Rüppel, A., Giesen, R.-U., Hartung, M., Heim, H.-P., 2022. Adhesion of liquid silicone rubber (LSR) polypropylene (PP) composites after storage tests. Polymer Testing TBD. https://doi.org/https://doi.org/10.1016/j.polymertesting.2022.107702 |
| Kahl, C., Bagnucki, J., Zarges, J.-C., 2022. Demonstration of Hybrid Effect in Single Fiber Pull-Out Tests for Glass/Cellulose-Reinforced Polypropylene with Different Fiber–Matrix Adhesions. Polymers 14, 2517. https://doi.org/https://doi.org/ 10.3390/polym14132517 |
| Eckel, E., Wiegel, K., Schlink, A., Ayeb, M., Brabetz, L., Hartung, M., Heim, H.-P., 2022. Determination of Local Electrical Properties Using a Potential Field Measurement for Electrically Conductive Carbon Fiber Reinforced Plastics with Metal Contact Pins Joined via Injection Molding. Polymers 14, TBD. https://doi.org/https://doi.org/10.3390/polym14142805 |
| Johannes, C., Hartung, M., Heim, H.-P., 2022. Polyurethane-Based Gel Electrolyte for Application in Flexible Electrochromic Devices. Polymers 14, 2636. https://doi.org/https://doi.org/10.3390/polym14132636 |
| Von Boyneburgk, C., Silbermann, S., Schweiger, L., Zarges, J.-C., Klussmann, H., Heim, H.-P., 2022. Holzdesign trifft Kunststofftechnik. Kunststoffe 2022, TBD. |
| Marl, S., Giesen, R.-U., Heim, H.-P., 2022. Liquid Silicone Rubber Foamed with Thermoplastic Expandable Microspheres. Materials 15, TBD. https://doi.org/https://doi.org/10.3390/ma15113779 |
| Rehmer, A., Klute, M., Kroll, A., Heim, H.-P., 2022. An internal dynamics approach to predicting batch-end product quality in plastic injection molding with Recurrent Neural Networks. In 6th IEEE Conference on Control Technology and Applications (CCTA), Vol. 53, Trieste, Italy, 22.-25- August 2022. IFAC, Elsevier. |
| Eckel, E., Schlink, A., Heim, H.-P., 2022. Development of an approach to determine the electrical resistance in the contact area of conductive thermoplastic compounds and contact pins joined via assembly injection molding, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan. |
| Japins, G., Giesen, R.-U., Hartung, M., Heim, H.-P., 2022. Direct injection molding as a prospective method for TPE based medical disposable manufacturing, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan. |
| Güzel, K., Zarges, J.-C., Heim, H.-P., 2022. Effect of Cell Morphology on Flexural Behavior of Injection-Molded Microcellular Polycarbonate. Materials 15, 3634. https://doi.org/https://doi.org/10.3390/ma15103634 |
| Klute, M., Heim, H.-P., 2022. Using Thermoplastic Polyester Polyurethanes as a Bonding Agent for Poly(Lactic Acid) in Two Component Injection Molding, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan. |
| Elsesser, T., Ries, A., Heim, H.-P., 2022. Development of semifinished thermoplastic fiber products with integrated electromagnetic shielding properties, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan. |
| Volke, J., Heim, H.-P., 2022. Prediction of injection molding process parameters using machine learning methods, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan. |
| Jakob, F., Gothe, M., Gansiniec, F., Heim, H.-P., 2022. Investigation of the adhesive strength in a combined compaction and back-injection process to produce back-injected self-reinforced composites (SRCs) International Polymer Processing. International Polymer Processing 1–12. https://doi.org/10.1515/ipp-2022-4205 |
| Kahl, C., Schlink, A., Heim, H.-P., 2022. Pultruded Hybrid Reinforced Compounds with Glass/Cellulose Fibers in a Polybutylene Terephthalate Matrix: Property Investigation. Polymers 14, 1149. https://doi.org/https://doi.org/10.3390/polym14061149 |
| Marl, S., Giesen, R.-U., Klier, K., Hartung, M., Rüppel, A., Heim, H.-P., 2022. Flüssigsilikon ohne Fremdstoffe schäumen. Kautschuk Gummi Kunststoffe 75, 30–34. |
| Goetjes, V., Gemmeke, N., Heim, H.-P., 2022. Biokunststoffe und deren Beständigkeit. Kunststoff Innovation 1, 30–33. |
| Zurawik, R., Volke, J., Zarges, J.-C., Heim, H.-P., 2022. Comparison of Real and Simulated Fiber Orientations in Injection Molded Short Glass Fiber Reinforced Polyamide by X-ray Microtomography. Polymers 14, 29. https://doi.org/https://doi.org/10.3390/polym14010029 |
2021
| Mrzljak, S., Delp, A., Schlink, A., Zarges, J.-C., Hülsbusch, D., Heim, H.-P., Walther, F., 2021. Constant Temperature Approach for the Assessment of Injection Molding Parameter Influence on the Fatigue Behavior of Short Glass Fiber Reinforced Polyamide 6. Polymers 13, 1569. https://doi.org/https://doi.org/10.3390/polym13101569 |
| Volke, J., Finkeldey, F., Zarges, J.-C., Wiederkehr, P., Heim, H.-P., 2021. Schneller zum optimalen Betriebspunkt. Kunststoffe 4, 32–35. |
| Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Feldmann, M., Mariatti, M., 2021. Synergized high-load bearing bone replacement composite from poly(lactic acid) reinforced with hydroxyapatite/glass fiber hybrid filler-Mechanical and dynamic mechanical properties. Polymer Composites 42, 57–69. https://doi.org/10.1002/pc.25807 |
| Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Feldmann, M., Mariatti, M., 2021. Simultaneous impact modified and chain extended glass fiber reinforced poly(lactic acid) composites - Mechanical, thermal, crystallization and dynamic mechanical performance. Journal of Applied Polymer Science 138, 49752. https://doi.org/10.1002/app.49752 |
| Marl, S., Rüppel, A., Hartung, M., Klier, K., Giesen, R.-U., Heim, H.-P., 2021. LSR foam produced with water as blowing agent, Poster, 19th International Symposium of Silicon Chemistry, 2021, Online |
| Güzel, K., 2021. Findings of Research and Development. Foammelt - Success with low pressure, ENGEL Firma, virtual. |
| Güzel, K., 2021. Erkenntnisse aus Forschung und Entwicklung, Foammelt - Mit wenig Druck zum Erfolg, ENGEL Firma, Virtual. |
| Jakob, F., Pollmeier, J., Heim, H.-P., 2021. Process influences in the combined compacting and back-injection process to produce back-injected self-reinforced composites (SRCs) - analysis via multiple regression modelling. International Polymer Processing 36, 608–619. https://doi.org/https://doi.org/10.1515/ipp-2020-4105 |
| Heim, H.-P., Schmitt, J., Zarges, J.-C., Richter, R., Deuse, J., 2021. Digitaler Zwilling in der Kunststofftechnik - Lebensdaueroptimierte Herstellung technischer Bauteile durch Einsatz datengetriebener Methoden. Industrie Management 2021, 17–20. |
| Hartung, M., Nikousaleh, M.A., Riemann, N., Giesen, R.-U., 2021. Hart trifft auf weich in einem Guss: Einmalartikel aus Thermoplasten und Silikonen. FUTURE MANUFACTURING 24–25. |
| Klute, M., Heim, H.-P., 2021. Comparison of the Adhesive Properties of Ester and Ether Based Bio TPU, Thermoplastic Elastomers World Summit, Berlin, Germany. |
| Marl, S., Rüppel, A., Hartung, M., Klier, K., Giesen, R.-U., Heim, H.-P., 2021. Liquid Silicone Rubber foams made with water as blowing agent. Advanced Engineering Materials 24, 1–20. https://doi.org/10.1002/adem.202100382 |
| Güzel, K., Heim, H.-P., 2021. The Effect of Injection Molding Parameters on Microcellular Foam Morphology, SPE FOAMS® Conference, 13-16 September, Virtual. |
| Jakob, F., Heim, H.-P., 2021. Patentschrift, Verbundbauteil und Verfahren zur Herstellung eines Verbundbauteils, DE102021103497B3. |
| Schlink, A., Mieth, F., Heim, H.-P., 2021. Patentschrift, Verfahren zur Herstellung eines Materialgemisches aus einem oder mehreren Polymeren und einem expandierbaren Graphit, DE102019122710A1. |
| Volke, J., Finkeldey, F., Zarges, J.-C., Wiederkehr, P., Heim, H.-P., 2021. Quicker Evaluation of the Optimum Operating Point. Kunststoffe International 3, 24–27. |
| Klier, K., Middendorf, B., Wetzel, A., Maximilian, S., Wiemer, N., Zarges, J.-C., Heim, H.-P., 2021. Patentschrift, Metallische Faser als Bestandteil eines Betonbauteiles, DE102020110643A1. |
| Erdmann, R., Kabasci, S., Heim, H.-P., 2021. Thermal Properties of Plasticized Cellulose Acetate and Its β-Relaxation Phenomenon. Polymers 13, 1–14. https://doi.org/10.3390/polym13091356 |
| Volke, J., Finkeldey, F., Zarges, J.-C., Wiederkehr, P., Heim, H.-P., 2021. Learning quality characteristics for plastic injection molding processes using a combination of simulated and measured data, 36th International Conference of the Polymer Processing Society, Montreal, Canada. |
| Nikousaleh, M.A., Riemann, N., Hartung, M., Giesen, R.-U., Heim, H.-P., 2021. Mehrkomponenten-Spritzgießen von TP/LSR-Verbunden „Herstellung von medizintechnischen Multifunktionsteilen“. WT Werkstattstechnik online 111, 440–445. https://doi.org/DOI 10.37544/1436-4980-2021-06-84 |
| Jakob, F., Pollmeier, J., Bisevac, S., Heim, H.-P., 2021. Modification of self-reinforced composites (SRCs) via film-stacking process. International Polymer Processing TBD. https://doi.org/10.1515/ipp-2021-4025 |
| Marl, S., Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2021. LSR foams: comparison of different blowing agents, 36th International Conference of the Polymer Processing Society, Montreal, Canada. |
| Wolff, S., Heim, H.-P., 2021. Odor and Emission Characteristics of cellulose Bio-Polyamide Compounds, in: Universität Kassel, F.K. (Hrsg.), 23rd Conference Odour and Emission of Plastic Materials. Kassel / Germany, S. TBD. |
| Japins, G., Hartung, M., Heim, H.-P., 2021. Entwicklung der direktverarbeitenden Fertigung für medizinische Einwegprodukte „Direktcompoundierung für die Medizintechnik“. WT Werkstattstechnik online 111, 435–439. https://doi.org/DOI 10.37544/1436-4980-2021-06-79 |
| Kahl, C., Gemmeke, N., Bagnucki, J., Heim, H.-P., 2021. Investigations on fiber-matrix properties of heat-treated and UV-treated regenerated cellulose fibers. Composites Part A: Applied Science and Manufacturing 26. https://doi.org/https://doi.org/10.1016/j.compositesa.2021.106669 |
| Hartung, M., Nikousaleh, M.A., Giesen, R.-U., 2021. 2K-Spritzgießen mit variothermer Temperierung von Werkzeugeinsätzen, SKZ Siliconelastomere, Würzburg. |
| Zarges, J.-C., Heim, H.-P., 2021. Influence of cyclic loads on the fiber-matrix-interaction of cellulose and glass fibers in polypropylene. Composites Part A: Applied Science and Manufacturing 149, 1–12. https://doi.org/https://doi.org/10.1016/j.compositesa.2021.106491 |
2020
| Güzel, K., Klute, M., Kurgan, N., Heim, H.-P., 2020. Influence of the Degree of Crystallinity and the Surface Free Energy on the Adhesion Properties of Different PLA/PBS Blends in Multicomponent Injection Molding, The 35th International Conference of the Polymer Processing Society, Izmir, Turkey. https://doi.org/10.1063/1.5142934 |
| Giesen, R.-U., Nikousaleh, M.A., Hartung, M., Heim, H.-P., 2020. Hard-soft components for medical applications, LSR innovations 2020, Neuss. |
| Zarges, J.-C., Sälzer, P., Heim, H.-P., 2020. Correlation of fiber orientation and fiber-matrix-interaction of injectionmolded polypropylene cellulose fiber composites. Composites Part A: Applied Science and Manufacturing 139, TBD. https://doi.org/10.1016/j.compositesa.2020.106112 |
| Wolff, S., Heim, H.-P., 2020. Influences of Processing Parameters on Odour Characteristics of Compounds produced from Renewable Raw Materials, 22nd Conference Odour and Emission of Plastic Materials, Universität Kassel, Fachgebiet Kunststofftechnik, Kassel / Germany. |
| Rüppel, A., Giesen, R.-U., Heim, H.-P., 2020. Chemical and mechanical analysis of the post-curing process of different low volatile liquid silicone rubbers, Silicone Elastomers World Summit. |
| Rüppel, A., Giesen, R.-U., Heim, H.-P., 2020. Investigation of the Post Curing Process of Liquid Silicone Rubber using Mechanical Tests Methods and Gas Chromatography, Silicone & TPE Elastomers US Summit. |
| Marl, S., Klier, K., Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2020. Injection moulding of silicone foam with water as foaming agent, International Silicone Conference. |
| Finkeldey, F., Knoll, J., Zarges, J.-C., Heim, H.-P., Wiederkehr, P., 2020. Learning quality characteristics for plastic injection molding processes using a combination of simulated and measured data. Journal of Manufacturing Processes 60, 134–143. https://doi.org/10.1016/j.jmapro.2020.10.028 |
| Marl, S., Klier, K., Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2020. LSR foams made with water as blowing agent, 6th CellMAT, Virtual. |
| Heim, H.-P., Mieth, F., Schlink, A., Wiegel, K., Brabetz, L., 2020. Joining of Contact Pins and Conductive Compounds via Injection Molding -- Influence of the Flow Situation on the Electrical Contact Resistance. International Polymer Processing 35, 184–192. https://doi.org/10.3139/217.3879 |
| Beg, M.D.H., Islam, M.R., Mamun, M.A.A., Heim, H.-P., Feldmann, M., 2020. Comparative analysis of the properties: Microcrystalline cellulose fiber polyamide composites filled with ethylene copolymer and olefin elastomer. Polymers and Polymer Composites 28, 242–251. https://doi.org/10.1177/0967391119871740 |
| Volke, J., Heim, H.-P., 2020. Maschinelles Lernen im Spritzgießprozess, 25. Nationales SAMPE-Symposium,19th Februar, Kassel, Deutschland. |
| Wübbeke, A., Schöppner, V., Paul, A., Tiemann, M., Austermeier, L., Fitze, M., Chen, M., Jakob, F., Heim, H.-P., Wu, T., Niendorf, T., Röhricht, M.-L., Schmidt, M., 2020. Long- and Short-Term Tensile Strength and Morphology of Joined Beta- Nucleated Polypropylene Parts, in: Society of Plastic Engineers (Hrsg.), SPE ANTEC 2020: the Annual Technical Conference for Plastic Professionals : online, 30 March-5 May 2020. Curran Associates, Inc., Red Hook, NY, S. 487–491. |
2019
| Von Boyneburgk, C., Sälzer, P., Fuchs, J., Heim, H.-P., 2019. Influence of the Adhesion on the Mechanical Chracteristics of Self-Reinforced Polymer-Veneer-Composites, Baltic Polymer Symposium 2019, Vilnius, Lithuania. |
| Marl, S., Hartung, M., Giesen, R.-U., Heim, H.-P. (Hrsg.), 2019. Flexible Foams made of Liquid Silicone Rubber and expandable Microspheres. SPE-Inspiring Plastics Professionals, Valladolid, Spanien. https://doi.org/http://dx.doi.org/doi:10.17170/kobra-202204266098 |
| Hartung, M., Nikousaleh, M., Rüppel, A., Giesen, R.-U., Heim, H.-P., 2019. UV Surface Treatment of Polycarbonate for Adhesion Improvement to Liquid Silicone Rubber (LSR). Journal of Plastics Technology 15, 189–209. https://doi.org/10.3139/0999.040220019 |
| Schlitt, C., Hartung, M., Rüppel, A., Giesen, R.-U., Heim, H.-P., 2019. UV Pre-Treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process. International Polymer Processing: The Journal of the Polymer Processing Society 34, 30–36. https://doi.org/10.3139/217.3509 |
| Giesen, R.-U., Hartung, M., Marl, S., Heim, H.-P., 2019. LSR-Schaum hergestellt im Spritzgießverfahren. GAK Gummi Fasern Kunststoffe 72, 314–317. |
| Marl, S., Giesen, R.-U., Hartung, M., Heim, H.-P., 2019. LSR foam produced by injection molding. Rubber Fibres Plastics International 14, 228–231. |
| Gemmeke, N., Fuchs, J., Heim, H.-P., Scival, S., 2019. Natural fiber reinforced technical (bio-) composites modified with halogen-free flame retardants, ANTEC 2019, Society of Plastic Engineers, Detroit, USA. |
| Rüppel, A., Giesen, R.-U., Hartung, M., Klier, K., Heim, H.-P., 2019. Die Haftung von LSR-Polypropylen-Verbunden nach Lagerung, ThGOT Thementage Grenz- und Oberflächentechnik, Zeulenroda. |
| Moritzer, E., Hirsch, A., Heim, H.-P., Cherif, C., Truemper, W., 2019. Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. Welding in the World 63, 867–873. https://doi.org/10.1007/s40194-019-00714-3 |
| Verheyen, F., Giesen, R.-U., Heim, H.-P., 2019. The Influence of different die geometries on the Extrusion Process of High-Consistency Silicone Rubber, ANTEC 2019, Society of Plastic Engineers, Detroit, USA. |
| Gemmeke, N., Heim, H.-P., 2019. Flammgeschützte biobasierte Kunststoffe, Werkstofftechnik, Universität Kassel, Kassel, Germany, Poster. |
| Gemmeke, N., Feldmann, M., Heim, H.-P., 2019. Processing and characterization of engineering biocomposites based on polybutylenterephthalat (PBT) and polytrimethylentherephthalat (PTT) with regenerated cellulose fibers modified with maleic anhydride grafted polyethylene as a processing agent. Composites Part A: Applied Science and Manufacturing 118, 327–335. https://doi.org/10.1016/j.compositesa.2019.01.007 |
| Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Alam, A.K.M.M., Heim, H.-P., Feldmann, M., 2019. Synergized poly(lactic acid)-hydroxyapatite composites: Biocompatibility study. Journal of Applied Polymer Science 136, 47400. https://doi.org/10.1002/app.47400 |
| Giesen, R.-U., Hartung, M., Heim, H.-P., 2019. Using UV-light for silicone processing methods, Silicone Elastomers 2019, Vienna. |
| Von Boyneburgk, C., Fuchs, J., Klute, M., Sälzer, P., Zarges, J.-C., Heim, H.-P., Gemmeke, N., 2019. Aktuelle Schwerpunktthemen im Bereich der Biokunststoffe und Bioverbundwerkstoffe, Poster. Poster. |
| Klute, M., Fuchs, J., Heim, H.-P., 2019. Blending CA with PBS to increase the bonding strength in two-component injection molding, ANTEC 2019, Society of Plastic Engineers, Detroit, USA. |
| Sälzer, P., Mieth, F., Tromm, M., Heim, H.-P., 2019. Patentschrift, Formflexibler Einsatz, formgebendes Werkzeug, Verwendung eines formflexiblen Einsatzes, Verfahren zur Herstellung eines formgebenden Werkzeugs, Verfahren zur Herstellung eines Kunststoff enthaltenden Formteils, Kunststoff enthaltendes Formteil, DE102019121862A1. |
| Hofmann, J., von Boyneburgk, C., Tunger, S., Heim, H.-P., Kuhl, D., 2019. Parameter identification for constitutive models of textile composite materials using digital image correlation, Proceedings of the 8th GACM Colloquium on Computational Mechanics For Young Scientists From Academia and Industry, 195-198. https://doi.org/10.1002/pamm.201900416 |
| Tromm, M., Shaayegan, V., Wang, S., Heim, H.-P., Park, C.B., 2019. Investigation of the mold-filling phenomenon in high-pressure foam injection molding and its effects on the cellular structure in expanded foams. The international Journal for the Science and Technology of Polymers and Biopolymers 160, 43–52. https://doi.org/10.1016/j.polymer.2018.11.006 |
| Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Mariatti, M., Feldmann, M., 2019. Oxidative induction and performance of oil palm fiber reinforced polypropylene composites - Effects of coupling agent and UV stabilizer. Composites Part A: Applied Science and Manufacturing 125, 105577. https://doi.org/10.1016/j.compositesa.2019.105577 |
| Jakob, F., Mieth, F., Heim, H.-P., Marten, S., 2019. Characterization of Anisotropic Properties of Hot Compacted Self-Reinforced Composites (SRCs) via Thermal Diffusivity Measurement. International Polymer Processing 2019, 532–540. https://doi.org/10.3139/217.3812 |
| Scheffler, B., Wetzel, A., Sälzer, P., Middendorf, B., 2019. Regenerated cellulosic fibers to enhance the stability under cyclic thermal stress. Beton- und Stahlbetonbau / Concrete and Reinforced Concrete Structures 114, 674–682. https://doi.org/10.1002/best.201900027 |
| Ricoeur, A., Judt, P., Zarges, J.-C., Feldmann, M., Heim, H.-P., 2019. Deflecting mode-I cracks in anisotropic materials. Mechanics of Materials 103060 (13pp). https://doi.org/10.1016/j.mechmat.2019.05.007 |
| Weber, J., Heim, H.-P., 2019. A Closer Look at the Bonding Capacity of Thick Metal-Plastic Hybrids. International Polymer Processing 34, 91–99. https://doi.org/10.3139/217.3654 |
2018
| Klute, M., Feldmann, M., Heim, H.-P., 2018. Bio-Based Alternatives for Hard-Soft Connections. Kunststoffe international 40–44. |
| Zarges, J.-C., 2018. Charakterisierung des Bruchverhaltens von Polypropylen - Celluloseregeneratfaser - Verbunden. Kassel University Press GmbH, Kassel. |
| Heim, H.-P., Giesen, R.-U., Rüppel, A., Hartung, M., Verheyen, F., 2018. Verbunde aus PC oder PP mit LSR sind marktreif. Thermoplast-Silikon-Verbunde im Mehrkomponentenspritzguss herstellen. Plastverarbeiter 13, 40–44. |
| Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2018. Langzeitbeständigkeit der Silikatisierung und der Einfluss auf die Haftungseigenschaften zwischen Flüssigsilikonkautschuk-Thermoplastverbunden. Kautschuk Gummi Kunststoffe 2018, 20–25. |
| Judt, P., Zarges, J.-C., Ricoeur, A., Heim, H.-P., 2018. Anisotropic fracture properties and crack path prediction in glass and cellulose fiber reinforced composites. Engineering Fracture Mechanics 188, 344–360. https://doi.org/10.1016/j.engfracmech.2017.08.027 |
| Sälzer, P., Heim, H.-P., 2018. Correlation between Processing and Mechanical Properties of Composites with Organic Fillers, 34th Polymer Processing Society, Taipei,Taiwan. |
| Zarges, J.-C., Kaufhold, C., Feldmann, M., Heim, H.-P., 2018. Single fiber pull-out test of regenerated cellulose fibers in polypropylene: An energetic evaluation. Composites Part A: Applied Science and Manufacturing 105, 19–27. https://doi.org/10.1016/j.compositesa.2017.10.030 |
| Sälzer, P., Feldmann, M., Heim, H.-P., 2018. Wood-Polypropylene Composites: Influence of Processing on the Particle Shape and Size in Correlation with the Mechanical Properties Using Dynamic Image Analysis. International Polymer Processing 33, 677–687. https://doi.org/10.3139/217.3446 |
| Kahl, C., Feldmann, M., Sälzer, P., Heim, H.-P., 2018. Advanced short fiber composites with hybrid reinforcement and selective fiber-matrix-adhesion based on polypropylene: Characterization of mechanical properties and fiber orientation using high-resolution X-ray tomography. Composites Part A: Applied Science and Manufacturing 111, 54–61. https://doi.org/10.1016/j.compositesa.2018.05.014 |
| Gemmeke, N., Feldmann, M., Heim, H.-P., 2018. Naturally Non-Flammable: PBT Compounds Modified with Natural Fiber Reinforcement as Flame Retardant. Kunststoffe international 51–54. |
| Fuchs, J., Feldmann, M., Assmann, C., Vorwerg, W., Heim, H.-P., 2018. Cross-Linked Hydrophobic Starch Granules in Blends with PLA. International Polymer Processing 33, 89–95. https://doi.org/10.3139/217.3407 |
| Gemmeke, N., Feldmann, M., Heim, H.-P., 2018. Natürlich nicht brennbar. Kunststoffe 108, 77–80. |
| Heim, H.-P., Ries, A., 2018. Werkstoffe und Prozesse für den Leichtbau mit Kunststoffen, Fachtagung Werkstoffsymposium 2018, Salzgitter. |
| Kahl, C., Feldmann, M., Heim, H.-P., 2018. Inline UV light irradiation of cellulose and glass fibers in pultrusion of thermoplastics composites, ANTEC 2018, Society of Plastic Engineers, Orlando, USA. |
| Ries, A., Heim, H.-P., 2018. Properties, process combinations and application potentials of self-reinforced thermoplastic composites, Fachtagung Faszination Hybrider Leichtbau, Wolfsburg. |
| Heim, H.-P., Giesen, R.-U., Rüppel, A., Hartung, M., Verheyen, F., 2018. Herstellung von Standardthermoplast-Silikon-Verbunden im Mehrkomponentenspritzguss, Kunststoffe in der Medizintechnik 2018, VDI-Tagung. |
| Giesen, R.-U., Hartung, M., Heim, H.-P., 2018. Producing and analysing liquid silicone rubber foams, LSR innovations 2018, Cologne. |
| Feldmann, M., Böhm, S., Kohl, D., Heim, H.-P., von Boyneburgk, C., 2018. Characterization of wood-based multi-material systems under dynamic impact stress, Wood Material Science and Engineering. https://doi.org/10.1080/17480272.2018.1501605 |
| Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Feldmann, M., 2018. Impact modified PLA-hydroxyapatite composites - Thermo-mechanical properties. Composites Part A: Applied Science and Manufacturing 107, 326–333. https://doi.org/10.1016/j.compositesa.2018.01.017 |
| Rüppel, A., Jähnig, D., Giesen, R.-U., Vajen, K., Heim, H.-P., 2018. Innovative Materials for Novel Concepts for Internal Heat Exchangers. International Polymer Processing 453–459. https://doi.org/10.3139/217.3432 |
| Schlitt, C.U., Giesen, R.-U., Hartung, M., Rüppel, A., Heim, H.-P., Walther, T., 2018. Haftungsrisiken gemindert. UVC-Licht verbessert durch Oberflächenaktivierung die Haftung zwischen PC und Silikon. Kunststoffe 108, 142–147. |
| Tromm, M., Heim, H.-P., 2018. Schaum nach Maß-Eine Prozessvariante des Schaumspritzgießens eröffnet neue Leichtbaupotenziale. Kunststoffe 108, 56–61. |
| Beg, M.D.H., Islam, M.R., Mamun, M.A.A., Heim, H.-P., Feldmann, M., Akindoyo, J.O., 2018. Characterization of polyamide 6.10 composites incorporated with microcrystalline cellulose fiber: Effects of fiber loading and impact modifier. Advances in Polymer Technology 37, 3412. https://doi.org/10.1002/adv.22125 |
| Gemmeke, N., Feldmann, M., Heim, H.-P., 2018. Naturally non flammabale. Kunststoffe international 108, 51–54. |
| Klute, M., Feldmann, M., Heim, H.-P., 2018. Biobasierte Alternativen für Hart-Weich-Verbindungen. Kunststoffe 75–79. |
| Von Boyneburgk, C., Feldmann, M., Heim, H.-P., 2018. Self-Reinforced Polymer Veneer-Composites - Characteristics under Impact Load, Baltic Polymer Symposium 2018, Jurmala, Latvia. |
| Von Boyneburgk, C., Sälzer, P., Feldmann, M., Heim, H.-P., 2018. Characteristics of Self-Reinforced Polymer-Veneer-Composites under Impact Load, Poster. 34th International Conference of Polymer Processing Society, Taipei,Taiwan. |
| Gemmeke, N., Heim, H.-P., 2018. Potentiale und Anwendungen flammgeschützter, cellulosefaserverstärkter PTT und PBT Compounds in Elektro- und Elektronikanwendungen, NaroTech, Rudolstadt. |
| Verheyen, F., Giesen, R.-U., Heim, H.-P., 2018. Die Extrusion von (Fest-)Silikonkautschuk - eine Verfahrensanalyse, VDI Fachtagung Kabelextrusion 2018, Nürnberg, Deutschland. |
| Verheyen, F., Giesen, R.-U., Heim, H.-P., 2018. Verarbeitung von Festsilikonkautschuk im Extrusionsprozess, Elastomerforum 2018, Osnabrück, Deutschland. |
| Schlitt, C., Hartung, M., Giesen, R.-U., Heim, H.-P., Rüppel, A., 2018. UV Pre-treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process. Journal of Plastics Technology / Zeitschrift Kunststofftechnik 15, 189–209. https://doi.org/10.3139/217.3509 |
| Marl, S., Hartung, M., Giesen, R.-U., Heim, H.-P., 2018. Silicone Foams to reduce weight, save material and increase insulation properties, Silicone Elastomers World Summit 2018, Mailand, Italian. |
| Marl, S., Giesen, R.-U., Heim, H.-P., 2018. Injection Molding and Analysis of Liquid Silicone Rubber Foams with expandable Microspheres, 5th Cellmat, Bad Staffelstein, Deutschland. |
| Feldmann, M., 2018. Biokunststoffe und Bioverbundwerkstoffe – Impulsvortrag, Sitzung des PA Kunststoffe der Forschungsvereinigung Antriebstechnik e.V., Fürth. |
| Giesen, R.-U., Hartung, M., Marl, S., Heim, H.-P., 2018. LSR foams, in: Amos Golovy (Hrsg.), LSR 2018. Anaheim, USA, S. TBD. |
| Rüppel, A., Giesen, R.-U., Hartung, M., Heim, H.-P., 2018. The Adhesion of LSR and different Polypropylene-Types after Storage Tests, in: - (Hrsg.), International Silicone Conference. Ohio, Cuyahoga, S. TBD. |
| Schweiger, L., Conradi, J., Alexander, T., 2018. Beeinflussung der Aufmerksamkeit durch alternierende Aufgaben auf mobilen und stationären IT-Geräten, GfA, Dortmund : Frühjahrskongress 2018, Frankfurt a. M., Beitrag B.7.2. |
| Klier, K., Sauer, V., Krooß, P., Hartung, M., Giesen, R.-U., Niendorf, T., Heim, H.-P., 2018. Patentschrift, Aktor mit einem Aktorelement aus einer Formgedächtnislegierung, DE102018109228A1. |
| Sälzer, P., Hillmer, H., Feldmann, M., Heim, H.-P., Ha, U.-M., 2018. Patentschrift, Kunststoffverbundwerkstoff mit mindestens einem in eine Kunststoffmatrix eingebrachten Füllstoff, DE102018119964A1. |
| Fehling, E., Krooß, P., Wetzel, A., Middendorf, B., Niendorf, T., Heim, H.-P., Seim, W., 2018. Mikrofaserbewehrter Hochleistungsbeton, Patent, DE102018107926A1. |
2017
| Meri, R.M., Zicans, J., Ivanova, T., Saldabola, R., Reinholds, I., Roja, Z., Feldmann, M., Heim, H.-P., 2017. Fabrication and characterization of ethylene-octene copolymer composites with ionic liquid functionalized carbon nanotubes. Proceedings of the Estonian Academy of Sciences 66, 347–353. https://doi.org/10.3176/proc.2017.4.05 |
| Kahl, C., Feldmann, M., Heim, H.-P., 2017. Advanced short fiber composites with hybrid reinforcement based on glass and cellulose fibers: Effect of coupling agent on mechanical properties, Polymer Processing Society, Dresden. |
| Judt, P., Ricoeur, A., Zarges, J.-C., Feldmann, M., Heim, H.-P., 2017. Bruchmechanische Untersuchungen und Risswachstum in heterogenen anisotropen Werkstoffen, Werkstoffwoche 2017, Dresden. |
| Tromm, M., Heim, H.-P., 2017. Thermoplast-Schaumspritzgießverfahren pull and foam. Schlussbericht IGF-Vorhaben Nr. 18254 N/1. |
| Verheyen, F., Giesen, R.-U., Heim, H.-P., 2017. Influence of different types and amounts of crosslinking agent on the curing process of silicone rubber. Zeitschrift Kunststofftechnik 4, 233–253. https://doi.org/10.3139/O999.02042017 |
| Verheyen, F., Giesen, R.-U., Heim, H.-P., 2017. Mechanical Properties of Polydimethylsiloxane as a Function of the Amount and Type of Crosslinking Agent. International Polymer Processing 32, 337–342. https://doi.org/10.3139/217.3334 |
| Zarges, J.-C., Minkley, D., Heim, H.-P., Feldmann, M., 2017. Fracture toughness of injection molded, man-made cellulose fiber reinforced polypropylene. Composites Part A: Applied Science and Manufacturing 98, 147–158. https://doi.org/10.1016/j.compositesa.2017.03.022 |
| Geck, J.-M., Jarka, S., Heim, H.-P., 2017. Investigations on Tightness of Polymer-Metal Hybrids in Environments with Thermal, Media, and Mechanical Loads. International Polymer Processing 32, 467–473. https://doi.org/10.3139/217.3376 |
| Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2017. The Adhesion of LSR and Polypropylene, Silicone Elastomer World Summit, München. |
| Fuchs, J., Heim, H.-P., 2017. Compounds aus vernetzter Stärke, Möglichkeiten und Potenziale eines Tausendsassas, Potsdam. |
| Mieth, F., Verheyen, F., Giesen, R.-U., Heim, H.-P., 2017. The Extrusion Process of High Consistency Silicone Rubber, Silicone Elastomer World Summit, München. |
| Giesen, R.-U., Rüppel, A., Verheyen, F., Heim, H.-P., 2017. Modifikation von Festsilikonen mit Kieselsäuren, DGM Fachausschuss Polymerwerkstoffe, Dresden. |
| Gemmeke, N., Feldmann, M., Heim, H.-P., 2017. PBT and Bio-based PTT reinforced with man-made cellulosic fibers, 33rd Polymer Processing Society (PPS-33), Cancun |
| Geck, J.-M., Heim, H.-P., Fischer, W., 2017. Flexibles Kunststofffügezentrum für Reibschweißverfahren/Flexible plastics joining centre for friction welding procedures. Joining Plastics. Fügen von Kunststoffen 180–185. |
| Tromm, M., Heim, H.-P., 2017. Conrolling cellular structure and surface quality in foam injection molding - innovative core-back mold for research, SPE FOAMS® 2017, Bayreuth. |
| Sälzer, P., Heim, H.-P., 2017. Einfluss der Prozessparameter bei der Verarbeitung von Wood-Plastic Composites, Werkstoffwoche, Dresden. |
| Zarges, J.-C., Feldmann, M., 2017. Fatigue behavior of short fiber bio-based composites for engineering applications, 33rd International Conference of the Polymer Processing Society, Cancun. |
| Rüppel, A., Giesen, R.-U., Heim, H.-P., 2017. Langzeitbeständigkeit der Silikatisierung und der Einfluss auf die Haftungseigenschaften zwischen LSR-Thermoplast-Verbunden, in: - (Hrsg.), Werkstoffwoche. Dresden, S. TBD. |
| Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Feldmann, M., 2017. Effects of surface modification on dispersion, mechanical, thermal and dynamic mechanical properties of injection molded PLA-hydroxyapatite composites. Composites Part A: Applied Science and Manufacturing 1–37. https://doi.org/10.1016/j.compositesa.2017.09.013 |
| Rüppel, A., Giesen, R.-U., Heim, H.-P., 2017. The Adhesion of LSR Thermoplastic Composites after Storage Tests, Antec 2017. Anaheim. |
| Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2017. Hart-Weich-Verbunde aus LSR und mit UV-Licht aktivierten Polycarbonaten. GAK-Gummi Fasern Kunststoffe 70, 648–651. |
| Heim, H.-P., Jarka, S., Geck, J.-M., 2017. Flexible Assembly Machine Combines Multiple Plastics Joining Processes. Assembly 60, 46–51. |
| Giesen, R.-U., 2017. Beitrag zur Herstellung 3-dimensionaler Kunststoffscheiben mit integrierter Funktion zur Veränderung der Transparenz durch Elektrochromie. Kassel University Press GmbH, Kassel. |
| Jarka, S., 2017. Rotatives Vibrationsschweißen. Kassel University Press GmbH, Kassel. |
| Sauer, V., Wolff, S., Schweiger, L., 2017. Electroencephalography (EEG) supported Olfactometry - Current Methods and Future Applications, 19th Conference Odour and Emissions of Plastic Materials, Kassel, Deutschland. |
| Verheyen, F., Giesen, R.-U., Heim, H.-P., 2017. Analysis of the extrusion process of silicone rubber, PPS Europe Africa Conference, Dresden. |
| Judt, P., Zarges, J.-C., Ricoeur, A., Heim, H.-P., 2017. Crack path predictions in fiber reinforced composites. Procedia Structural Integrity 5, 769–776. https://doi.org/10.1016/j.prostr.2017.07.168 |
| Marl, S., Giesen, R.-U., Heim, H.-P., 2017. Results of Mullins Experiment to compare stress softening of different types of liquid silicone rubber, 33rd International Conference of Polymer Processing Society, Cancun, Mexico. |
| Zarges, J.-C., Feldmann, M., Heim, H.-P., Judt, P., Ricoeur, A., 2017. Man-Made Cellulose Fiber Reinforced Polypropylene - Characterization of Fracture Toughness and Crack Path Simulation, Society of Plastics Engineers, ANTEC 2017, 693-698. |
| Fuchs, J., Feldmann, M., Heim, H.-P., 2017. PLA-Blends with modified Starch Granules - Drying and Crosslinking of native potato Starch as well as subsequent blending with PLA in a one-step Compounding Process. |
| Mamun, M.A.A., Nikousaleh, M., Feldmann, M., Heim, H.-P., 2017. Carbon Fiber Composites Materials, Lightweight and Sustainable Materials for Automotive Applications, CRC Press Chapter 6. |
| Kahl, C., Schnieders, J., Heim, H.-P., Sauer, V., 2017. Integration of Electrochromic Devices in Plastic Parts by Injection Moulding , Polymer Processing Society, Dresden. |
| Giesen, R.-U., Adam, M., Methe, D., Heim, H.-P., 2017. Thermoplastic elastomers and PEDOT/PSS for electroactive polymers. TPE magazine 172–176. |
| Verheyen, F., Hartung, M., Giesen, R.-U., Heim, H.-P., 2017. Werkzeug zu Extrusion von Mehrschichtverbunden aus Thermoplasten und Silikon Mittels Vorbehandlung des Thermoplasten ,it UV strahlen im Coextrusionsverfahren, Patent, DE102017006204A1. |
| Schlitt, C., Giesen, R.-U., Heim, H.-P., 2017. Influence of The Injection Molding Process On the Peeling Resistance of Thermoplastic/ Silicone Composites, 33rd International Conference of Polymer Processing Society, Cancun. |
| Trütner, M., Jennerich, M., Wetzel, A., Burghardt, T., Heim, H.-P., Sträter, O., Middendorf, B., 2017. Safe Structural Bonding of Ultra-High Performance Concrete. Adhesion Adhesives & Sealants 14, 20–23. https://doi.org/10.1007/s35784-017-0013-1 |
| Schlitt, C., 2017. Einfluss der Prozessparameter auf Verbundfestigkeiten beim PA6-/ LSR-Mehrkomponentenspritzgießen, Rubber Meets Science, Aachen, Deutschland. |
| Giesen, R.-U., Hartung, M., Rüppel, A., Heim, H.-P., 2017. UV-Vorbehandlung für Thermoplaste für das MK-Spritzgießen mit Flüssigsilikon (LSR), 12. ThGOT Thementage Grenz- und Oberflächentechnik, Zeulenroda/Thüringen. |
| Giesen, R.-U., Hartung, M., Rüppel, A., Heim, H.-P., 2017. UV Pre-treatment of Thermoplast Components for LSR - Thermoplastic Parts, LSR 2017, Anaheim, USA. |
| Bacaicoa Garcia, I., Lütje, M., Sälzer, P., Umbach, C., Brückner-Foit, A., Heim, H.-P., Middendorf, B., 2017. Comparative investigation of two-dimensional imaging methods and X-ray tomography in the characterization of microstructure. MP: Materialprüfung / Materials Testing 59, 829–836. https://doi.org/10.3139/120.111076 |
2016
| Rüppel, A., Giesen, R.-U., Jarka, S., Heim, H.-P., 2016. WPC welding of hybrid joints. Joining Plastics 2016, TBD. |
| Zarges, J.-C., Sälzer, P., Feldmann, M., Heim, H.-P., 2016. Determining Viscosity Directly in the Injection Molding Process: In-Line Rheometer for Natural-Fiber-Reinforced Plastics. Kunststoffe international 106–109. |
| Mamun, M.A.A., Nikousaleh, M., Feldmann, M., Rüppel, A., Sauer, V., Kleinhans, S., Heim, H.-P., 2016. 8 - Lignin Reinforcement in Bioplastic Composites, Lignin in Polymer Composites, Matthew Deans, Elsevier Inc, 135-165 |
| Fuchs, J., Feldmann, M., Ziesler, J., Heim, H.-P., 2016. Biokunststoffe in Form bringen. Kunststoffe 106, 74–76. |
| Zarges, J.-C., Sälzer, P., Feldmann, M., Heim, H.-P., 2016. Viskositätsbestimmung direkt im Spritzgießprozess: In-Line-Rheometer für Naturfaserverstärkte Kunststoffe. Kunststoffe 144–148. |
| Verheyen, F., Giesen, R.-U., Heim, H.-P., 2016. Characterizing the Rheological Behavior of Liquid Silicone Rubber Using a High Pressure Capillary Rheometer, Society of Plastics Engineers, ANTEC 2016, 104-108. |
| Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2016. Verfahren zur Haftverbesserung von Silikon auf einer thermoplastischen Oberfläche, Patent. https://doi.org/EP3417025B1 |
| Bogedale, L., Hartung, M., Giesen, R.-U., Heim, H.-P., 2016. Verfahren zum physikalischen Schäumen von Silikonkautschukkörpern, Patent, EP3238904B1. |
| Jarka, S., Feldmann, M., Heim, H.-P., 2016. Tiefziehfähige Folie und Verfahren zur Herstellung einer Tiefziehfähigen Folie, Patent, EP000003078492B1. |
| Hartung, M., Giesen, R.-U., 2016. UV light - the ideal pretreatment method for LSR-Thermoplastic composites, Silicone Elastomers World Summit, Cologne. |
| Trütner, M., Freisinger-Schadow, S., Wetzel, A., Heim, H.-P., Middendorf, B., 2016. Microstrctural investigations of the interface of ultra- high performance concrete and mineral adhesive using high resolution-CT analysis, ICCCM 2016 – 2nd International Conference on the Chemistry of Construction Materials, GDCh-Monographie Vol. 50, Gesellschaft Deutscher Chemiker e.V. |
| Heim, H.-P., 2016. Specialized injection molding techniques. Elsevier, William Andrew, Amsterdam [u.a.]. |
| Sauer, V., Faulhaber, K., Schnieders, J., Heim, H.-P., 2016. Back-Inejctions moulding of plastic based electrochromic system, 12th International Meeting on Electrochromism, Delft, Netherlands. |
| Rüppel, A., Aßmann, C., Giesen, R.-U., Heim, H.-P., 2016. Investigation of the Mechanical and Olfactory Properties of PP with Wood and PET Fibers for Automobile Application Fields, 18th Conference Odour and Emissions of Plastic Materials, Kassel, Germany |
| Feldmann, M., Heim, H.-P., Zarges, J.-C., 2016. Influence of the process parameters on the mechanical properties of engineering biocomposites using a twin-screw extruder. Composites Part A: Applied Science and Manufacturing 83, 113–119. https://doi.org/10.1016/j.compositesa.2015.03.028 |
| Trütner, M., Jennerich, M., Wetzel, A., Burghardt, T., Sträter, O., Heim, H.-P., Middendorf, B., 2016. Ultrahochfeste Betonbauteile qualitätssicher fügen. adhäsion KLEBEN & DICHTEN 60, 40–43. https://doi.org/10.1007/s35145-016-0077-0 |
| Heim, H.-P., Jarka, S., Geck, J.-M., 2016. Development of a Flexible Polymer Joining Center Capable of Performing Multiple Joining Processes Using Different Methods in a Single Cycle, Society of Plastics Engineers, ANTEC 2016, 1325-1328. |
| Rüppel, A., Giesen, R.-U., Heim, H.-P., 2016. The Adhesion of LSR Polycarbonate Composites after Various Secondary Treatment Processes, 32th Polymer Processing Society, Lyon,France. |
| Tromm, M., Heim, H.-P., 2016. High-Pressure Foam Injection Molding With Local Core-Back Method – Simulation Approach, SPE TPM&F Division & Pacific Northwest Section, SPE FOAMS® 2016. |
| Heim, H.-P., Jarka, S., Geck, J.-M., 2016. Joining Investigations of Polymer-Metal-Hybrids for Permanantly Non-Leaking Applications, Society of Plastics Engineers, ANTEC 2016, 1351-1355. |
| Sälzer, P., Feldmann, M., Heim, H.-P., 2016. Effects of Particle Characteristics on the Mechanical Properties of Wood-Plastic Composites, 32nd International Conference of the Polymer Processing Society, Lyon, France. |
| Verheyen, F., Aßmann, C., Fahlbusch, R., Giesen, R.-U., Heim, H.-P., 2016. Analyzing the curing-process of liquid silicone rubber in respect of emissions and mechanical properties, 18th Conference Odour and Emissions, Kassel, Germany. |
| Sauer, V., 2016. Struktur-Eigenschafts-Beziehung von Mischungen aus thermoplastischem PMMA mit vernetzten PMMA-Kolloiden. Kassel University Press, Kassel. |
| Giesen, R.-U., Hartung, M., Heim, H.-P., Rüppel, A., 2016. Patentschrift - Verfahren zur Haftverbesserung von Silikon auf einer thermoplastischen Oberfläche. Institut für Werkstofftechnik - Fachgebiet Kunstofftechnik, Kassel. |
| Hartung, M., Giesen, R.-U., Heim, H.-P., 2016. The Influence of the Process Parameters in Multi-Component Injection Molding on the Composite Adhesion of the Material Combination PA6 with Self-Adhesive Liquid Silicone Rubber (LSR), 32nd International Conference of the Polymer Processing Society, Lyon, France. |
| Rüppel, A., Vajen, K., Jähnig, D., Heim, H.-P., 2016. Neuartige Konzepte für interne Wärmeübertrager mit innovativen Materialien, in: Solpol (Hrsg.), 26. Symposium Thermische Solarenergie. Bad Staffelstein, S. TBD. |
| Schlitt, C., Hartung, M., Rüppel, A., Giesen, R.-U., Heim, H.-P., 2016. Multicomponent Injection Molding Of Thermoplastics And Liquid Silicone Rubber (LSR) - Either Cured By Heat Or UV Light , ANTEC 2016, Society of Plastic Engineers, Indianapolis, USA. |
| Tromm, M., Heim, H.-P., 2016. Injection molded components with functionally graded foam structures - Procedure and essential results. Journal of Cellular Plastics 52, 299–319. https://doi.org/10.1177/0021955X15570077 |
2015
| Mamun, M.A.A., Nikousaleh, M.A., Heim, H.-P., 2015. Rheological, Mechanical, Environmental Stress Corrosion and Gamma Resistance Properties of Semi-Crystalline PLA: Effect of Catalysts on the Reactivity of a Chain Extender. Journal of Biobased Materials and Bioenergy 9, 285–294. https://doi.org/10.1166/jbmb.2015.1523 |
| Mamun, M.A.A., Heim, H.-P., Faruk, O., Bledzki, A., 2015. The use of banana and abaca fibres as reinforcements in composites. Biofiber Reinforcement in Composite Materials 236–272. https://doi.org/10.1533/9781782421276.2.236 |
| Mamun, A., Heim, H.-P., Bledzki, A., 2015. The use of maize, oat, barley and rye fibres as reinforcements in composites. Biofiber Reinforcement in Composite Materials 454–487. https://doi.org/10.1533/9781782421276.4.454 |
| Kleinhans, S., Feldmann, M., Feldmann, M., Mamun, M.A.A., Sauer, V., 2015. Zur Geruchs- und Emissionsmessung von thermoplastbasierten Lignin-Blends, 17. Workshop of Odour and Emissions of Plastic Materials, Kassel, Germany. |
| Zarges, J.-C., Feldmann, M., Heim, H.-P., 2015. In-Line Rheological Characterisation of Natural Fibre Reinforced Composites During the Injection Moulding Process, Polymer Processing Society, Graz. |
| Giesen, R.-U., Adam, M., Methe, D., Heim, H.-P., 2015. TPEs und leitfähige Polymere für dielektrisch elektroaktive Polymere (dEAP), 8. Automobil- Kunststoff- Pumpen Forum, Spitzingsee. |
| Giesen, R.-U., Verheyen, F., Methe, D., Bogedale, L., Heim, H.-P., 2015. Filled Liquid Silicone Rubber (LSR) to increase mechanical and physical properties, Polymer Processing Society Conference, Graz. |
| Fuchs, J., Feldmann, M., Heim, H.-P., 2015. Modification of Starch-Blends with PLA by using a novel one-step Compounding Process, 23rd BEPS 2015, Karlsruhe. |
| Feldmann, M., Mamun, M.A.A., Zarges, J.-C., Heim, H.-P., 2015. Prozess- und Materialoptimierung von Biokunststoffen- und -compositen, 7. Biopolymer-Kolloquium, Berlin, Germany. |
| Feldmann, M., Jarka, S., Heim, H.-P., 2015. Patentschrift - Tiefziehfähige Folie und Verfahren zur Herstellung einer tiefziehfähigen Folie. Institut für Werkstofftechnik - Fachgebiet Kunstofftechnik, Kassel. |
| Faulhaber, K., Sauer, V., Gövert, S., Schnieders, J., Heim, H.-P., 2015. Integration of Electrochromic Devices by the Injection Moulding Process, Baltic Polymer Symposium 2015, Riga. |
| Heim, H.-P., Feldmann, M., Fuchs, J., 2015. (Schaum-)Spritzguss von Stärkeblends - Verfahren und Eigenschaften, 7. Biopolymer-Kolloquium, Berlin, Germany. |
| Sauer, V., Heim, H.-P., Mieth, F., 2015. Influence of Different Assembling Methods of Aluminium-Plastic-Joinings to the Thermal Management for LED-Lighting, 31st International Conference Polymer Processing Society, Jeju-do, Südkorea. |
| Sälzer, P., Feldmann, M., Heim, H.-P., 2015. Wood-Polypropylene-Composites: Influence of Particle Size and Shape on Mechanical Properties, Baltic Polymer Symposium 2015, Riga. |
| Bogedale, L., Giesen, R.-U., Heim, H.-P., 2015. Flüssig- oder Feststoffsilikon in unvulkanisiertem Zustand sowie Verfahren zur Verarbeitung von Flüssig- und Feststoffsilikon im Spritzgussverfahren, Patent, DE102015010380B4. |
| Heim, H.-P., Rohde, B., 2015. Self-Reinforcing Thermoplastic Composites. Plastics Age 61, 83–90. |
| Mamun, M.A.A., Nikousaleh, M., Feldmann, M., Rüppel, A., Sauer, V., Kleinhans, S., Heim, H.-P., 2015. Lignin Reinforcement in Bioplastic Composites, Lignin in polymer composites, William Andrew, Norwich, S. 153-165, https://doi.org/10.1016/B978-0-323-35565-0.00008-4 |
| Ries, A., 2015. Thermo-mechanische Gradierung eigenverstärkter Polypropylen-Composite. kassel university press, Kassel. https://doi.org/10.19211/kup9783737650458 |
| Muhammad, Y.H., Ahmad, S.H., Abu Bakar, M.A., Mamun, M.A.A., Heim, H.-P., 2015. Mechanical properties of hybrid glass/kenaf fibre-reinforced epoxy composite with matrix modification using liquid epoxidised natural rubber. Journal of Reinforced Plastics and Composites 34, 896–906. https://doi.org/10.1177/0731684415584431 |
| Heim, H.-P., Sauer, V., Mieth, F., 2015. Changeable Thermal Management for LED-Lighting, Society of Plastics Engineers, ANTEC 2015, Newtown, S. 727-731. |
| Feldmann, M., Heim, H.-P., 2015. Welt der Kunststoffe: Bio...aber sicher!? Chemie{&}more 2–3. |
| Biermann, D., Gausemeier, J., Heim, H.-P., Hess, S., Petersen, M., Ries, A., Wagner, T., 2015. Planning and optimisation of manufacturing process chains for functionally graded components-part 2: Case study on self-reinforced thermoplastic composites. Production Engineering 9, 405–416. https://doi.org/10.1007/s11740-015-0610-2 |
| Verheyen, F., Giesen, R.-U., Heim, H.-P., 2015. Influence of the post-curing process on liquid silicone rubber, 31st International Conference on the Polymer Processing Society, Melville. |
| Schubert, C., Rüppel, A., Nendel, K., Heim, H.-P., 2015. Beständigkeit von Gleich- und Mischmaterialschweißverbindungen aus Wood Plastic Composite (WPC). Holztechnologie 56, 24–30. |
2014
| Heim, H.-P., Ries, A., 2014. The Gradation of Material Structures with the Aim of Property Optimization of Plastic Products, 29th International Conference of the Polymer Processing Society, American Institute of Physics, Nürnberg. |
| Rohde, B., Wibbeke, A., Heim, H.-P., Schöppner, V., 2014. The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films. ISRN Polymer Science 2014, 1–9. https://doi.org/10.1155/2014/601741 |
| Zarges, J.-C., Feldmann, M., Heim, H.-P., 2014. Einfluss der Compoundierung auf die Eigenschaften von biobasierten Polyamiden mit Cellulosefaserverstärkung, naro.tech - 10. Internationales Symposium, Erfurt. |
| Heim, H.-P., Mamun, M.A.A., 2014. Modification of Semi-Crystalline PLA: Impact, Tensile and Thermal Properties. Journal of Biobased Materials and Bioenergy 8, 292–298. https://doi.org/10.1166/jbmb.2014.1437 |
| Zarges, J.-C., Feldmann, M., Heim, H.-P., 2014. Influence of the compounding process on bio-based polyamides with cellulosic fibers, 30th Polymer Processing Society, Cleveland/Ohio. |
| Feldmann, M., Heim, H.-P., 2014. Herstellung, Eigenschaften und Anwendungspotentiale von Naturfaserverstärkten Kunststoffen, Fortschritte in der Kunststofftechnik- Theorie und Praxis,16. Fachtagung, Osnabrück. |
| Mamun, M.A.A., Feldmann, M., Heim, H.-P., 2014. Geruch und Emissionen von Naturfaser-Verbundwerkstoffen. The odour and emission from natural fibre composites, 16. Workshop: Geruch und Emissionen bei Kunststoffen, Kassel, Germany. |
| Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H., Mahnken, R., Dammann, C., Wünsch, O., Al-Badawi, A., Rohde, B., Brückner-Foit, A., Gausemeier, J., Gräßler, I., Petersen, M., 2014. Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe (Teil 1). Kunststoffe 104, 35–39. |
| Giesen, R.-U., Heim, H.-P., 2014. Polymer Application Center UNIpace Of The University of Kassel, Silicone Elastomers 2014, Wien. |
| Giesen, R.-U., Heim, H.-P., 2014. Kooperation zwischen Praxis und Wissenschaft - Verarbeitung von Thermoplasten und Elastomeren für die Medizintechnik,VDMA AG Medizintechnik, Frankfurt (Main). |
| Heim, H.-P., Rüppel, A., Mamun, M.A.A., 2014. Hybridwerkstoffe: Leichter mit maßgeschneiderten Verbunden / Hybrid materials. Kunststoffe 104, 87–91. |
| Tromm, M., Heim, H.-P., 2014. Formation of morphology as a function of process control by foam injection molding of a functionally graded component, Society of Plastics Engineers, ANTEC 2014, Newtown, S. 1551-1556. |
| Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H., Mahnken, R., Dammann, C., Wünsch, O., Al-Baldawi, A., Rohde, B., Brückner-Foit, A., Gausemeier, J., Gräßler, I., Petersen, M., 2014. Self-Reinforced Thermoplastic Composites - Composite Materials (Part 1). Kunststoffe international / Magazine for Plastics 104, 31–35. |
| Heim, H.-P., Rüppel, A., 2014. Hybrid Composite Materials Made of Polypropylene with Wood and Polyethylene Terephthalate Fibers (Plastics in Building & Construction), Society of Plastics Engineers, ANTEC 2014, Newtown, S. 2039-2043. |
| Heim, H.-P., Rohde, B., 2014. Self-Reinforced Materials: Manufacturing, Properties and their Potential for Lightweight Composites, Asian Workshop on Polymer Processing Annual Conference (AWPP), Kenting, Taiwan. |
| Faulhaber, K., Sauer, V., Gövert, S., Schnieders, J., Heim, H.-P., 2014. The Effects of UV-ozone treatment on the Improvement of the Wettability of ITO-coated Plastic, International Meeting on Electrochromism, Taipei. |
| Heim, H.-P., Rohde, B., Ries, A., 2014. Morphology-Property-Relationship of Thermo-Mechanically Graded Self-Reinforced Polypropylene-Composites, 29th International Conference of the Polymer Processing Society, American Institute of Physics, College Park, S. 776-779. https://doi.org/10.1063/1.4873890 |
| Heim, H.-P., Sauer, V., Mieth, F., 2014. Assessment of the changeability of plastics processing systems, ANTEC 2014, Society of Plastic Engineers, Las Vegas,USA. |
| Rüppel, A., Verheyen, F., Giesen, R.-U., Heim, H.-P., 2014. Analysis and comparison of different types of liquid silicone rubber with reference to process parameter, Silicone Elastomer World Summit, Wien. |
| Giesen, R.-U., Adam, M., Heim, H.-P., 2014. Dielektrisch elektroaktive Polymere (dEAP) auf Basis von thermoplastischen Elastomeren (TPE). Zeitschrift Kunststofftechnik/Journal of Plastics Technology 10, 29–48. |
| Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H., Mahnken, R., Dammann, C., Wünsch, O., Al-Badawi, A., Rohde, B., Brückner-Foit, A., Gausemeier, J., Gräßler, I., Petersen, M., 2014. Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe (Teil 2). Kunststoffe 104, 72–78. |
| Schubert, C., Rüppel, A., Clauß, B., Nendel, K., Heim, H.-P., 2014. Untersuchung zur Schweißbarkeit bei der Herstellung von Hybridbauteilen aus naturfaser-, holzfaser- und polymerfaserverstärkten Kunststoffen in Abhängigkeit von Rezeptur und äußeren Einflussfaktoren: Abschlussbericht IGF Vorhaben 17396BG. |
| Biermann, D., Gausemeier, J., Heim, H.-P., Hess, S., Petersen, M., Ries, A., Wagner, T., 2014. A framework for the computer-aided planning and optimisation of manufacturing processes for components with functional graded properties, The 29th International Conference of the Polymer Processing Society. American Institute of Physics, College Park, S. 762-765. https://doi.org/10.1063/1.4873887 |
| Feldmann, M., Verheyen, F., Heim, H.-P., 2014. Continuous-fiber-reinforced engineering thermoplastics from renewable raw materials - Processing and Properties, 2nd Bioplasic Materials, Chicago/Ill. |
| Biermann, D., Rohde, B., Hess, S., Wagner, T., Ries, A., Wibbeke, A., Heim, H.-P., 2014. Optimization of thermomechanical processes for the functional gradation of polymers by means of advanced empirical modeling techniques, The 29th International Conference of the Polymer Processing Society. American Institute of Physics, College Park, S. 766-770. https://doi.org/10.1063/1.4873888 |
| Schlitt, C., 2014. Silicone In Medical Devices - Essentials For Safe Infusion Therapy, Silicone Elastomers World Summit 2014, Wien, Österreich. |
| Giesen, R.-U., Adam, M., Heim, H.-P., 2014. Manufacturing dielectric electroactive polymers (DEAP) by using thermoplastic elastomers (TPE) and conductive polymers, 30th Polymer Processing Society, Cleveland/Ohio. |
| Heim, H.-P., Sauer, V., Mieth, F., 2014. Funktionenintegrierende Fertigung, VDI Tagung Spritzgießen, Oberflächen und Verfahrensoptimierung im Fokus, Baden. |
2013
| Homberg, W., Biermann, D., Heim, H.-P., 2013. Functionally graded materials in industrial mass production. Fundamentals. Verlag Wissenschaftliche Scripten, Auerbach. |
| Fuchs, J., Feldmann, M., Heim, H.-P., 2013. Natürlich und fest anbinden. Kunststoffe 100–103. |
| Heim, H.-P., Giesen, R.-U., 2013. An Electrochromic System Integrated in a Polycarbonate Pane for an Automotive Application, Advances in Plastic Technology, Sosnowiec,Poland. |
| Heim, H.-P., Biermann, D., Homberg, W., 2013. Functionally graded materials in industrial mass production. Volume 2, Verl. Wiss. Scripten, Auerbach. |
| Fuchs, J., Feldmann, M., Heim, H.-P., 2013. Konstruktionsschäume auf Stärkebasis, 6. Biokunststoffe, Duisburg. |
| Schnieders, J., Gövert, S., Heim, H.-P., Giesen, R.-U., 2013. Abschlussbericht zum BMBF-Forschungsprojekt.Intelligente Kunststoff-Verscheibung: Innovative Kombination von Technologien zur Herstellung funktionaler 3D-Kunststoff-Verscheibungen für eine energieeffiziente Nutzung. |
| Schöppner, V., Heim, H.-P., Wibbeke, A., Ries, A., Rohde, B., 2013. Graded Structures in Polymers, Functionally Graded Materials in Industrial Mass Production | Fundamentals. Verl. Wiss. Scripten, Auerbach, S. 11-42. |
| Heim, H.-P., Tan, S.K., Ahmad, S.H., Chia, C.H., Mamun, A., 2013. A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy. American Journal of Materials Science 3, 55–61. |
| Fuchs, J., 2013. Biokunststoffe werden erwachsen. Kunststoffe 18–19. |
| Geminger, T., Otto, M., Heim, H.-P., 2013. Verfahren zur Herstellung eines Formkörpers sowie Formkörper, Patent, DE102013007059A8. |
| Schneider, M., Michels, R., Pipich, V., Goerigk, G., Sauer, V., Heim, H.-P., Huber, K., 2013. Morphology of Blends with Cross-Linked PMMA Microgels and Linear PMMA Chains. Macromolecules 46, 9091–9103. https://doi.org/10.1021/ma401889k |
| Heim, H.-P., Tillmann, W., Ries, A., Sievers, N., Rohde, B., Zielke, R., 2013. Visualisation of the degrees of compaction of self-reinforced polypropylene composites by means of ultrasonic testing. Journal of Plastics Technology / Zeitschrift Kunststofftechnik 275–294. |
| Schlitt, C., 2013. Silicone In Medical Technology - Requirements, Limitations And Perspectives, Rubber Meets Science, Aachen, Deutschland. |
| Heim, H.-P., Desjean, A., 2013. Climatic Ageing of Components of Polymer Based Electrochromic Devices. International Polymer Processing 28, 256–260. https://doi.org/10.3139/217.2657 |
| Hess, S., Ries, A., Kersting, P., Heim, H.-P., 2013. Efficient Spatial and Temporal Modelling of Material Temperatures Within Self-Reinforced Polypropylene Sheets During IR Radiation. Procedia CIRP 9, 49–54. https://doi.org/10.1016/j.procir.2013.06.167 |
| Jarka, S., Heim, H.-P., Fischer, W., 2013. Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion, Society of Plastic Engineers, 71st annual technical conference of the Society of Plastics Engineers (ANTEC 2013). Brookfield, S. 738-742. |
| Brückner-Foit, A., Matheis, B., Skotarek, C., Zeismann, F., Ries, A., Rohde, B., Heim, H.-P., 2013. Lokale Verformungen in einem eigenverstärkten Verbundwerkstoff. - Sitzung des Arbeitskreis Mikrostrukturmechanik im Fachausschuss Computersimulation der DGM, Osnabrück. |
| Heim, H.-P., Rohde, B., Ries, A., 2013. Thermo-mechanischer Umformprozess eigenverstärkter thermoplastischer Gradientenwerkstoffe.TRR 30: Prozessintegrierte Herstellung funktional gradierter Strukturen auf der Grundlage thermo-mechanisch gekoppelter Phänomene. |
| Heim, H.-P., Rohde, B., Ries, A., Faulhaber, K., Saleski, N., Hohmann, C., Salzmann, C., 2013. Thermo-Mechanical Match Mould Forming of Self-Reinforced Thermoplastic Gradient Materials. Functionally graded materials in industrial mass production, Verl. Wiss. Scripten, Auerbach, S. 97-112. |
| Mamun, M.A.A., Heim, H.-P., Beg, D.H., Kim, T.S., Ahmad, S.H., 2013. PLA and PP composites with enzyme modified oil palm fibre: A comparative study. Composites Part A: Applied Science and Manufacturing 53, 160–167. https://doi.org/10.1016/j.compositesa.2013.06.010 |
| Heim, H.-P., Jarka, S., Fischer, W., 2013. Rotatives Vibrationsschweißen - ein neuartiges Reibschweißverfahren. Joining Plastics 65, 176–181. |
2012
| Heim, H.-P., Ries, A., Rohde, B., 2012. Thermomechanische Gradierung von eigenverstärkten Thermoplastverbunden, BASF, Ludwigshafen. |
| Heim, H.-P., Schöppner, V., Wibbeke, A., Ries, A., 2012. Herstellung und Heißkompaktierung von thermoplastischen Folienhalbzeugen. Unverstreckte und verstreckte Polypropylen- und Polycarbonattypen im Vergleich, TRR 30: Prozessintegrierte Herstellung funktional gradierter Strukturen auf der Grundlage thermo-mechanisch gekoppelter Phänomene, Siegsdorf. |
| Mamun, M.A.A., Heim, H.-P., 2012. Optimization of chain extender reactivity and upgrading of PLA properties using various additives, BEPS, Denton, Texas. |
| Heim, H.-P., Englich, J., Reupert, A., Ries, A., 2012. Lightweight hinge made of Textiles, 1st International Conference on Thermo-Mechanically Graded Materials, Kassel, Germany. |
| Sauer, V., Heim, H.-P., Schneider, M., Huber, K., 2012. Influence of particle characteristics and processing on material behaviour of a PMMA-Colloid-Compound, Polymer Processing Society Americas, Niagara Falls, Kanada. |
| Heim, H.-P., Geminger, T., 2012. Composite properties of a plastic-metal hybrid , PPS Americas Conference 2012, Niagara Falls, Canada. |
| Desjean, A., Heim, H.-P., 2012. Influence of humidity exposure and mechanical ageing in electrochromic devices, LOPE-C, München. |
| Feldmann, M., Berger, C., Bledzki, A., Heim, H.-P., 2012. Cellulose als Verstärkungsfaser für technische Biopolymere, 5. Biokunststoffe, Prozesse und Eigenschaften, Hannover. |
| Feldmann, M., Bledzki, A., Heim, H.-P., 2012. Prospects of Bio-based Polymers and their Composites, Baltic Polymer Symposium (BPS) 2012, Liepaja/ Latvia. |
| Heim, H.-P., Ries, A., Rohde, B., 2012. Partially Resolved Characterization of Thermo-Mechanically Graded Self-Reinforced Polypropylene Composites, 28th International Conference of the Polymer Processing Society, Pattaya, Thailand. |
| Heim, H.-P., Desjean, A., 2012. Ageing of polymer-based electrochromic devices, Polymer Processing Society Americas, Kanada, Nigara Falls. |
| Heim, H.-P., Bledzki, A., Rohleder, M., Tromm, M., 2012. Formation of foam structures and influence of processing procedure in foam injection moulding of thermoplastic materials, Cellular Materials ( CELLMAT 2012), Dresden. |
| Giesen, R.-U., Heim, H.-P., 2012. Forming of Electrochromic Plastic Panes, IME, Holland,USA. |
| Tromm, M., Heim, H.-P., 2012. Pull and Foam Method: First Investigations with chemical and physical blowing agents. FOAMS 2012 , 10th International Conference on Foam Materials & Technology. Curran, Red Hook, NY, S. 35-40. |
| Heim, H.-P., Rohde, B., Ries, A., 2012. Influence of the Process Conditions on the Morphology-Property-Relationship of Self-Reinforced PP-Composites, 1st International Conference on Thermo-Mechanically Graded Materials. Verlag Wissenschaftliche Scripten, Auerbach, S. 247-252. |
| Heim, H.-P., Rohde, B., Ries, A., 2012. Morphological Examinations of Self-Reinforced Polypropylene Composites, Le SEICO 2012 - SAMPE EUROPE 33rd International Technical Conference. SAMPE Europe Conferences and Printed by Curren Associates, Basel and Red Hook, NY, S. 382-287. |
| Feldmann, M., Berger, C., Mamun, A.A., Heim, H.-P., 2012. Mut zur „grünen“ Lücke. Kunststoffe 28–32. |
| Bledzki, A., Heim, H.-P., Paßmann, D., Ries, A., 2012. Manufacturing of Self-Reinforced All-PP Composites, Synthetic polymer-polymer composites. Hanser, Munich and Cincinnati, S. 719-738. |
| Biermann, D., Gausemeier, J., Heim, H.-P., Hess, S., Petersen, M., Ries, A., Wagner, T., 2012. Computer-Aided Planning and Optimization of Manufacturing Processes for Functional Graded Components, 1st International Conference on Thermo-Mechanically Graded Materials. Verlag Wissenschaftliche Scripten, Auerbach, S. 195-200. |
| Feldmann, M., Mammun, A.A., Bledzki, A., Heim, H.-P., 2012. Bio-based polyamides with innovative fibers for engineering parts: Materials-Processing-Characterization-Applications, Society of Plastics Engineers, ANTEC 2012 Plastics: Annual Technical Conference Proceeding. Newtown, Connecticut, S. 121-125. |
| Bledzki, A., Heim, H.-P., Rohleder, M., Schaub, S., 2012. Falling weight impact behaviour of polycarbonate and microcellular polycarbonates foams, Society of Plastics Engineers, ANTEC 2012, Annual Technical Conference Proceeding. Newtown, Conn, S. 2399-2404. |
| Grigalovica, A., Bartule, M., Zicans, J., Meri, R.M., Heim, H.-P., Berger, C., 2012. Relaxation properties of polyoxymethylene and ethylene-octene copolymer blend in solid and melt states. Proceedings of the Estonian Academy of Sciences 61, 200–206. https://doi.org/10.3176/proc.2012.3.09 |
| Gövert, S., Heim, H.-P., Jarka, S., Tromm, M., Schnieders, J., 2012. Pull and Foam-Injection moulding method: Foamed ribs for stiffening plane components, Society of Plastics Engineers, ANTEC 2012. Newtown, S. 2477-2480. |
| Heim, H.-P., Heim, H.-P., Bledzki, A., Rohleder, M., Tromm, M., 2012. Thermo-Mechanically Graded Injection Moulded Microcellular Foams, 1st International Conference on Thermo-Mechanically Graded Materials. Verlag Wissenschaftliche Scripten, Auerbach, S. 231-240. |
| Giesen, R.-U., Heim, H.-P., Gövert, S., Schnieders, J., 2012. Regelbare Transparenz: Kunststoffscheiben clever abdunkeln. Kunststoffe 92–95. |
| Sievers, N., Tillmann, W., Melchers, C., Zielke, R., Ries, A., Heim, H.-P., 2012. Evaluation of nondestructive methods to characterize self-reinforced polypropylene composites, 1st International Conference on Thermo-Mechanically Graded Materials. Verlag Wissenschaftliche Scripten, Auerbach, S. 253-258. |
| Heim, H.-P., Lieven, N., Ries, A., Sennhenn, D., 2012. Scharnierelement, hergestellt auf Basis mindestens eines Flächengebildes und Verfahren zur Herstellung eines Scharnierelements auf Basis mindestens eines Flächengebildes. Deutsches Patent- und Markenamt, Kassel. |
| Heim, H.-P., Lieven, N., Ries, A., Sennhenn, D., 2012. Technologievorstellung eines innovativen Leichtbau-Scharniers, 2. Möbel-Leichtbau-Symposium der Hochschule Ostwestfalen-Lippe, Lemgo. |
| Heim, H.-P., Hohmann, C., Faulhaber, K., Rohde, B., 2012. Development of a Moulding Tool Concept for the Manufacture of Self-reinforced Thermoplastic Gradient Materials. - 1st International Conference on Thermo-mechanically Graded Materials, Kassel, Deutschland. |
| Heim, H.-P., Jarka, S., 2012. Development of a radian friction welding machine using the circular process with limited rotational motion, Baltic Polymer Symposium 2012, Liepaja, Latvia. |
| Berger, C., Feldmann, M., Mamun, M.A.A., Heim, H.-P., 2012. Biokunststoffe-Potenziale und Chancen Kunstoffe in OWL, IHK, Bielefeld. |
| Heim, H.-P., Ries, A., Rohde, B., 2012. Mechanical characterisation of compression moulded self-reinforced polypropylene composites, Baltic Polymer Symposium 2012, Liepaja,Latvia. |
2011
| Heim, H.-P., Ries, A., Bledzki, A., 2011. Challenge of Functional Gradation of Self-reinforced Polypropylene Composites, SAMPE Europe SEICO 11, 32th International Technical Conference & Forum. SAMPE Europe, Paris, S. 148-155. |
| Ries, A., Rohde, B., Heim, H.-P., 2011. Thermo-mechanical Gradation of Self-reinforced Polypropylene Composites using Compression Moulding Technology, APST-2, Advances in Polymer Science and Technology, Linz, S. 108. |
| Heim, H.-P., Schöppner, V., Ries, A., Wibbeke, A., 2011. Hot-Compaction of self-reinforced polycarbonate films, PPS-27, 27th World Congress of the Polymer Processing Society. Curran Associates, Marrakech, S. 148-155. |
2010
| Michel, K., Hermann, S., Ludwig, B., 2010. Modelling chemical and biological reactions during unsaturated flow in silty arable soils. Geoderma 156, 293–301. https://doi.org/10.1016/j.geoderma.2010.02.029 |
| Bledzki, A., Ries, A., Paßmann, D., Heim, H.-P., 2010. Influence of the Compression Molding Process on Impact Behavior, ANTEC 2010 - Proceedings of the 68th Annual Technical Conference & Exhibition. Society of Plastics Engineers, Orlando, S. 369-373. |
| Potente, H., Moritzer, E., Schäfers, M., Heim, H.-P., Plugge, T., Ridder, H., 2010. Advanced investigations for the newly developed special injection molding process: GITBlow, Society of Plastics Engineers, ANTEC 2010, 68th Annual Technical Conference. S. 587-591. |
| Ludwig, B., Michel, K., Hermann, S., 2010. Modelling chemical and biological reactions during unsaturated flow through sandy soils. Australian Journal of Soil Research 48, 221–230. https://doi.org/10.1071/SR09145 |
| Schmidt, M., Freisinger-Schadow, S., Heim, H.-P., Mihm, K.-M., Dilger, K., Böhm, S., Wisner, G., 2010. Einsatzmöglichkeiten der Klebtechnik zum Fügen von ultra-hochfestem Beton im konstruktiven Betonbau. Schweißen und Schneiden 62, 26–35. |
| Bledzki, A., Ries, A., Paßmann, D., Heim, H.-P., 2010. Impact Behaviour of Property Graded Self-reinforced Polypropylene Composites, SAMPE Europe SEICO 10, 31st Technical Conference & Exhibition, Paris. |
2007
| Dose, M., Gruber, C., Grunz, A., Hook, C., Kempf, J.-O., Scharfenberg, G., Sick, B., 2007. Towards an Automated Analysis of Neuroleptics’ Impact on Human Hand Motor Skills, 2007 IEEE Symposium on Computational Intelligence and Bioinformatics and Computational Biology. IEEE, S. 494-501. https://doi.org/10.1109/CIBCB.2007.4221261 |